Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Natural Gas Laboratories to perform their Natural Gas Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Natural Gas laboratory that would like more information on these Natural Gas projects, please visit Register Laboratories or call toll free 1-855-377-6821.
LONG TERM. TESTING Petroleum laboratory needed for ISO and ASME Testing: of composite reinforcement to ASME PCC2/ISO 24817Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection, .
Laboratory needed for Feasibility study for syn-gas production using a new catalyst, Catalytic activity of NixA1BEA and NixSiBEA. Fixed bed reactor with a fixed total gas flow run until catalyst activity is significantly reduced First test: a 2:1 molar ratio CH4 and O2 Second test: a typical LNG gas run with similar carbon ?C? to O2 molar ratio Third test (optional): a typical natural gas mixture with similar carbon ?C? to O2 molar ratio We only provide the catalyst
Petroleum research & development laboratory needed for natural gas treatment research study. Our requirement is to check the efficiency of chemical for H2S Scavenging for crude natural gas. The natural gas stream contains H2S Concentration in crude natural gas is 150 PPM, The same needs to be treated by the chemical to achieve 0-5 PPM of H2S after treatment.
LONG-TERM India Laboratory needed for natural gas analysis on regular intervals as per OEM guidelines like hydrocarbons, CO2, nitrogen and contaminants in natural gas.
Description: Analytical laboratory needed for wide range hydrocarbon gas chromotagraphy to determine gas composition test on the natural gas coming from gas field for composition of the hydrocarbons right up to C16, the Gross and Net Heating Values of the gas, the Molecular Weight, the compressiblity factor and the adiabatic coefficient.
Analytical laboratory needed for wide rande hydrocarbon gas chromotagraphy to determine gas composition test on the natural gas coming from gas field for composition of the hydrocarbons right up to C16, the Gross and Net Heating Values of the gas, the Molecular Weight, the compressiblity factor and the adiabatic coefficient.
Contract laboratory needed for radiation test in hydrocarbon samples. Below is some information about the samples
Propane samples ,which is a liquefied petroleum gas (LPG), will be pressurized hydrocarbons gas in liquid state. The samples are in a steel sample cylinder. Vapors samples, which is mainly consists of Methane, Ethane and a little of Propane plus, could be (or not) pressurized hydrocarbons in vapor or gas state. The samples are in a steel sample cylinder. Natural Gasoline samples, which is a liquid hydrocarbons in atmospheric pressure, are in a Boston bottles.
For Propane and 3 inlet vapor samples:
? Gross Alpha ? Gross Beta ? Radium 226 ? Radium 228 ? Strontium ? Thorium ? Uranium
For one liquid natural gasoline sample:
? VOC ? SVOC ? RCRA metals including Hg+ ? Radium 226 ? Radium 228 ? Gamma
Natural gas company needs a test and calibration laboratory for natural gas turbine meters.size 16 inch - G4000 to test flow.
Contract Lab needed for valve testing for Leakage; Hydrostatic Strength; Maximum Flow Shut-off; Strength(bending moment, turning effort, impact); Continued Operation; Corrosion test; Marking Material Adhesion and Legibility.Tests according ANSI 4.6 - MANUALLY OPERATED VALVES FOR NATURAL GAS DISPENSING SYSTEMS)
USA environmental laboratory needed for soil testing to determine level of contamination / toxicology resulting from long term natural gas leaks
Asia Laboratory needed for solvent testing to determine the type of chemical (i.e. acid) to be used and the associated concentration for softening and/or dissolving the calcium carbonate debris (we have a sample, of limited amounts ? approximately 100g) found in a natural gas pipeline, at the fastest time, without less (or any) harm to the pipeline.
We have short-listed the type of chemicals to:-
a) Acetic Acid b) Formic Acid (together with citric acid or hydrochloric acid)
However, we are open to suggestions of other chemical types that can get the job done, while meeting the above requirements.
We need a quotation as well for below chemical:
1) Acetic Acid ? 3200 litres (3.36 tonnes)
Independent Laboratory needed for natural gas testing. Burner vendor provided low NOx burner that we require third and independent NG analysis to solve issue. We need a complete breakdown of the chemical composition of the Natural gas preferably to testing procedure IP337 paying particular attention to the heavier gases and double bonds like C3H6 propylene. We also need the analysis of specific gravity of Natural gas with mechanical method.
URGENT: Forensic Laboratory needed for natural gas testing for analysis of contaminants we are finding in our natural gas fuel at a power plant. These contaminants are black in color and are liquid, semi solid and solids. They are causing damage to jet engines. We need to identify the materials and possible sources. Samples are available now.
EPA USA Research Laboratory needed for ASTM compressed natural gas CNG testing of CNG used in engines according to ASTM standards.
Methane by test method ASTM D1945 Ethane by test method ASTM D1945 Propane by test method ASTM D1945 Butane & Heaver (C4H10+) by test method ASTM D1945 Carbon Dioxide and Nitrogen by test method ASTM D1945 Hydrogen by test method ASTM D2650 Carbon Monoxide by test method ASTM D2650 Oxygen by test method ASTM D1945 Sulfur by Title 17 CCR Section 94112 Method 16 And if you have the capabilities.. Siloxanes by EPA TO-14 15 GC/ELCD, GC/AED, GC/MS Hydrogen Sulfide by ASTM D4084
Energy company needs USA analytical chemistry laboratory for detailed analysis of natural gas condensate to C30+. I am also looking for water and methanol tested to low ppm levels.
Midwest laboratory needed for ASTM natural gas testing for electricity generation Once per year we collect natural gas samples in small cylinders provided by a lab. The lab analyses these samples by ASTM1945,Standard Test Method for Analysis of Natural Gas by Gas Chromatography D3246, and 3588.
Eastern European Laboratory needed for natural gas testing: gross/high calorific value of natural gas
USA or Mexico technical laboratory needed for MIL Standard, NFPA, ASTM leak detector testing. Needs to perform laboratory tests for leak detectors
MIL-PRF-25567 Leak Detector Compound, Oxygen Systems,
NFPA 52 Section 6-12.2 Leak Testing Compressed Natural Gas Vehicular Fuel System.
ASTM G186-05, Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
Analytical chemistry laboratory needed for natural gas testing: Test natural gas samples for sulfur compounds, volatile organic compounds, and siloxanes. If you do so, do you have a price quote and what are your reporting limits?
Oil Laboratory needed for GPA 2286 extended analyses: field sampling and laboratory analyses of natural gas samples taken at tailgates of selected gas processing plants and selected pipeline interconnects. Total of 28 samples staged over a 4-week period."
Materials Laboratory needed for ASTM Testing of Natural Gas sample to ASTM D5504: analysis for Sulfur by Gas chromatograph. The test procedure/method used in the past was ASTM D5504. 4 Natural gas samples
Polymer Laboratory needed for polymer testing studies and failure analysis study: ECE (R-110 and R-67) requirement testing on several polymers and plastics used in parts we produce. The following tests include: -Compressed natural gas (CNG)/Liquefied petroleum gas (LPG) compatibility, which involves exposing a sample of a given material to pentane at a certain temperature and pressure for a period of time, observing the volume and mass change. -Resistance to dry heat, which involves exposing a sample of a given material to its operating temperature for a period of time, observing the change in tensile strength and elongation -Ozone aging, which involves exposing a sample of a given material to a specific temperature and ozone concentration for a period of time, observing if there is a "cracking" failure mode Thanks!
Middle East Laboratory needed for natural gas testing and crude oil analysis. Test of crude oil and natural gas (all chemical and (LHV and HHV))
Canada Laboratory needed for natural gas analysis of gas from 10 wells. Simply identifying the chemical composition of natural gas from gas wells in northern British Columbia."
US Materials laboratory needed for ASTM Testing of Natural Gas: Chemical composition analysis of natural gas used as a vehicle fuel for adherence to SAE J1616 Testing per, ASTM D 1142-90, ASTM D 1945-91, ASTM D 3588-91, ASTM D 4084-88, ASTM D 1945, ASTM D 2650, ASTM D 4084
Colorado analytical chemistry laboratory needed for natural gas testing: Natural Gas Analysis by GC from a contract laboratory located in central or southern colorado. A local laboratory is needed to ensure prompt sample turnaround time!
Energy company needs analytical chemistry laboratory for natural gas analysis: Analyze natural gas sample for Total chlorine by combustion ion chromatography, Method ASTM 7359 with results 0.05 mg/m cubed. Also need to have this sample tested for mercury.
Middle East Oil Laboratory needed for ASTM Testing: fuel testing, oil testing and natural gas analyisi Distillate Oil -ASTM D 240 Heat of Combustion & ASTM D 5291 (Hydrogen, Carbon and Nitrogen) Natural Gas - ASTM D 1945 Composition of Natural Gas & ASTM D3588 Heating Value, Compressibility Other analysis methods may be used if they are equivalent.
Alabama Laboratory needed for Testing for existence of crude oil or natural gas on private property
USA analytical Chemistry Laboratory needed for natural gas testing, ASTM Testing: analyze for Oxygen, Mercaptanes, BTEX, Ethane & CO2.
Analytical Chemistry laboratory needed for natural gas testing of natural gas samples for arsenic levels.
Metropolitan analytical chemistry laboratory needed for natural gas testing to ASTM or GPA for natural gas component analysis natural gas component analysis C1 thru C6+ including ,CO2,nitrogen & oxygen. Also, sulfur testing on natural gas such as hydrogen sulfide and total sulfur
Europe Oil and Petrolem Laboratory needed for ASTM, ISO or GPA Testing of natural gas fixed gases, methane ethane, propane, butanes, pentanes in pm; C6 to C8 in parts per billion.
Geotechnical Laboratory needed for hydrocarbon testing of rock samples for natural gas
USA Microbiology Laboratory needed for natural gas testing: API RP38, enumeration of sulfate reducing and acid forming bacteria with genus id on positives
Analytical chemistry laboratory needed for composition and H2S analysis on natural gas samples.
Analytical Chemistry to test compressed Natural Gas filter elements for Industrial CNG distribution and treatment. Number of tests <4 Filtration efficiency & Burst test
Analytical Chemistry Laboratory needed for GPA 2166 natural gas analysis, including the sample collection according the GPA 2166 procedure: Gas Composition to C6+ (gas chromatography) (ASTM D 1945) Extended Gas Composition to C14 (GPA 2286) Heating value(ASTM D 3588) Relative density (ASTM D 3588) Specific density (ASTM D 3588) Compressibility factor (ASTM D 3588) Dew Point (ASTM D 1142) Sulfur (ASTM D 3246) Other Constituents & Contaminants, ppm -Hydrogen Sulfide (H2S) -Carbonyl Sulfide (COS) -Lead (Pb) -Vanadium (V) -Calcium (Ca) -Magnesium (Mg) -Sodium (Na) -Potassium (K) -Particulates -Siloxanes -Total Sulfur.
Connecticut, US EPA Analytical Chemistry Laboratory needed for testing HHV in natural Gas according to EPA 98.34 (a) 2(i) and 6
West Africa Analytical Chemistry Laboratory needed for compositional natural gas testing (BTU value).
ASTM/ISO Analytical Chemistry Laboratory needed for testing Mercury Catalyst and advise reasons for under performance. Purpose of Mercury Catalyst is to be remove mercury from the Natural Gas.
Asia ISO Laboratory needed for Natural gas mixtures analysis in accordance to ISO 17025.
ANSI Laboratory needed for testing the following as per Per ANSI NGV 2-2007: Ambient Cycling Test Extreme Temp Cycling Hydrostatic Burst Test Composite Flaw Tolerance Test Drop Test Bonfire Test Accelerated Stress Test Penetration Test Permeation Test Natural Gas Cycling Test Leak Before Break
Pasedena, California ASTM Laboratory needed to determine Dew Point of Natural Gas according to ASTM Method D1142. Hydrocarbon and water dew points can be determined by direct point measurement (chilled mirror device)or extended gas analysis, which identifies hydrocarbon components from C1 through C14. accuracy must be greater than 10 ppmv.
Analytical Chemistry Laboratory needed for uel testing Diesel fuel and Natural Gas Fuel.
Analytical Chemistry Laboratory needed for testing Natural Gas Composition, Burning Qualitites, caloric qualities, etc. Two tests shall be made(One in Mexico, and one in El Paso, TX). Check quality of Natural Gas as it compares to Mexican Regulations, and compare the values of Mexican Natural Gas with Natural Gas that can be obtained in El Paso, TX
Environmental Laboratory needed for heavy metals testing for mercury in Natural Gas.
USA Petroleum Laboratory needed for Natural Gas Condensate Analysis Testing and Octane Number Testing
Eastern USA environmental laboratory needed for ASTM pipeline inspection of transformer oils, natural gas, turbine oils, and aqua ammonia.
Southern California Analytical Chemistry Laboratory needed for ASTM Testing of Natural gas sample to ASTM D1945 standard
Oil Analytical Chemistry Laboratory needed for Portable gas chromatography to differentiate pipeline natural gas from methane due to decomposition etc ("swamp" gas).
South Wales ISO 17025 Analytical Chemistry Laboratory required for natural gas composition.
Middle East Materials Laboratory needed for analysis of Natural Gas: - Composition Analysis (ASTM D 1945) - Natural Gas Lower Heating Value Analysis (ASTM D 3588)
2) Distillate Oil: - Lower Heating Value at constant pressure - % H2 - Specific gravity - Density (ASTM D 4809-00, ASTM D 1018-00, ASTM D 1480-93, ASTM D445, ASME PTC22, or equivalents)
Analytical Chemistry Laboratory needed for Complete ASTM Natural Gas Analysis along with LHV.
Automotive laboratory needed for a crash test on a motorcycle. We have made a prototype of a motorcycle that works with natural gas (CNG) so I need to know about standard that must be applied for controlling the reliability and safety.
ISO 17025 Laboratory needed for Refinery Fuel Gas sample testing including Full hydrocarbon compositional analysis including unsaturates and hydrogen. This is not the same as natural gas. Also required are Gross and Net Calorific Values and Real Gas Density.
Materials Laboratory needed for Materials Analysis, Fatigue Analysis Testing of 316l .095 wall ss tubing at brazed face seal fitting,used in natural gas compression to 4500psi. tube fractured at interface,not completely
India PESO analytical chemistry laboratory needed for testing composition of natural gas, collected from various locations in India. We especially need to know ppm oxygen. The lab must be in India.
Analytical Chemistry laboratory needed for testing btu content of natural gas purchased from suppliers
Analytical Chemistry Laboratory needed for ASTM Testing (ASTM D1945 & ASTM D1657)of Natural Gas This is required for finalising the Gas Supply Agreement
Analytical Chemistry Laboratory needed for ASTM testing on natural gas for BTU rating.
Physical laboratory needed for testing BT output for natural gas and propane outdoor gas burning systems used in outdoor fireplaces. We have an 18" model and a 24" model of which we need both tested.