Top

Welcome!

NEED A LABORATORY?

Save time and money searching! Find a Lab for all your laboratory testing and scientific research.

Submit Laboratory Test Request

ARE YOU A LABORATORY?

Gain new business by registering your laboratory.

Register Laboratories

HAVE QUESTIONS?

Call us 24/7 1-855-377-6821 or send us an email.

Incoming Metals and Alloys Laboratory Test Requests

Contract Laboratory has received the following Metals and Alloys Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Metals and Alloys Laboratories to perform their Metals and Alloys Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Metals and Alloys laboratory that would like more information on these Metals and Alloys projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Metals and Alloys laboratory test requests. Please log in to see more.

17-00144

Metals and Alloys

Packaging laboratory needed for food contact surface testing for compliance to EU regulation (EN) 602/2004 testing of an aluminium wire to comply with food contact material.

Closed

17-00134

Metals and Alloys

Metallurgical laboratory needed for testing of bolt encapsulation material substance.

Closed

17-00115

Metals and Alloys

Material science laboratory needed for fatigue testing of rebar and couplers according to British Standard.

Closed

17-00087

Metals and Alloys

ASTM metallurgical laboratory needed for testing gold plated coupons made with copper or aluminum bases for Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resistance(Porosity) and Reflectivity all according to ASTM standards.

Closed

17-00059

Metals and Alloys

Metallurgical laboratory needed for ISO 9227 testing of metals.

Closed

17-00015

Metals and Alloys

Metallurgical laboratory needed for stainless steel and an oxide powder testing using Atomic Emission Spectroscopy ICP AES.

Closed

17-00010

Metals and Alloys

Engineering laboratory needed for performing coefficient of thermal expansion testing.

Closed

17-00009

Metals and Alloys

Metallurgical testing laboratory needed for determining recovery of Cu and Au in Cu - Au Skarn Ores and Mineralised Diorites

Closed

16-02364

Metals and Alloys

Metal Fittings company needs microbiology laboratory for biocidial efficacy testing of product surface testing according to EN ISO 22196 and TS EN 15457 standards. We are a fittings company. Our base material is brass. We plate it with first nickel and then chrome. We apply a biocide on chrome layer.

Closed

16-02343

Metals and Alloys

Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and CTM 541

Closed

16-02310

Metals and Alloys

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold Rolled sheet metal parts with compound surfaces; Size of Part ranges from 120 mm diameter X 100 mm in Length.

Closed

16-02303

Metals and Alloys

On site analysis needed in India of rock deposit for precious and semi precious metals and for gem stone.Black Rock with quartz bands seen in our field, so need to analyze the geo physical properties.

Closed

16-02295

Metals and Alloys

Metallurgical Laboratory needed for XRD on metal samples to solid (cast) form with high ferroalloy content to determine the carbides and alloy phases that
gave my hardfacing materials their hardness.

Closed

16-02252

Metals and Alloys

ISO metallurgical laboratory needed for surface roughness testing on Aluminum. Quantity: 10 - 15 pcs, size 120 mm x 95 mm. Material: Aluminum.
Surface finish Rz and Ra.

Closed

16-02167

Metals and Alloys

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp

Closed

16-02061

Metals and Alloys

FDA GMP compliant Laboratory needed for Measurement of Free Tin in a tin containing compound by direct pulse polarimetry

Closed

16-02052

Metals and Alloys

Mining operation extracting silver and gold needs cyanide bottle roll and size distribution test on some mine tailings to determine process and system cost. How many samples and what sample size will be required to complete the process? We are extracting silver and gold.

Closed

16-02026

Metals and Alloys

ASTM Testing of aluminum honeycombs to multiple ASTM standards: .ASTM C273 - Standard Test Method for Shear Properties of Sandwich Core MaterialsASTM C365 - Standard Test Method for Flatwise Compressive Properties of Sandwich CoresASTM C297 - Standard Test Method for Flatwise Tensile Strength of Sandwich ConstructionsIf you offer testing of aluminum honeycomb core, please provide a quote the three tests and for multiple honeycomb cell size.

Closed

16-02025

Metals and Alloys

Laboratory needed for quality control testing of the piping pressure of a piping steel lining

Closed

16-01947

Metals and Alloys

Materials Laboratory needed for Material characterization of metal with Polymer thinfilm
- Mechanical properties characterization of flat thin steel (0.1 x 5 x 30mm)
- Mechanical properties characterization of bent thin steel (0.1 x 5 x 30mm) down central axis
- SEM imaging and cross sectioning of of metal+polymer thin film for thinfilm measurement

Closed

16-01922

Metals and Alloys

URGENT LONG-TERM TESTING Laboratory needed for High temperature tensile strength testing of bonded aluminum sheets. Laboratory must have Environmental chamber with capability of heating up to 120C

Closed

16-01918

Metals and Alloys

Metallurgical laboratory needed for oxygen content testing and surface oxide testing of continuous cast copper rod. please provide sample requirement, time requirement and quotation for the same.

Closed

16-01755

Metals and Alloys

Europe materials laboratory needed for ASTM and DIN Testing of lubricant oils to Copper Corrosion ASTM D 130/12 Aluminium Corrosion DIN EN ISO 6270-2 Ash content: DIN EN ISO 6245 Flock Point DIN 51351

Closed

16-01751

Metals and Alloys

Materials laboratory needed for ASTM Testing to measure Hiding power of coated aluminum powder to ASTM D6441,Standard Test Methods for Measuring the Hiding Power of Powder Coatings, ASTM D 3451, ASTM D 3451, Standard Guide for Testing Coating Powders and Powder Coatings

Closed

16-01709

Metals and Alloys

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial waste.

Closed

16-01704

Metals and Alloys

Geological laboratory needed for geological tests for gold

Closed

16-01672

Metals and Alloys

LONG-TERM TESTING Metallurgical laboratory needed for stainless steel tubing certification and testing for certain RA value, surface roughness

Closed

16-01649

Metals and Alloys

Environmental toxicology laboratory needed for TCLP Testing: Toxicity characteristic leaching procedure TCLP metals

Closed

16-01624

Metals and Alloys

Metallurgical laboratory needed for Caustic soda testing on metals coatings.

Closed

16-01618

Metals and Alloys

Metallurgical laboratory needed for ICP-OES to do solubility measurements of metal oxides present in deep eutectic solvent liquid mixtures.

Closed

16-01523

Metals and Alloys

Europe Materials Laboratory needed for Paint film performance tests on mild steel panels
Sr No Test
1 Salt Spray Test (504 hours)
2 Humidity Resistance (504 hours)
3 Pencil hardness
4 Dry Adhesion
5 Elongation
6 Impact Resistance (direct)
7 Impact Resistance (indirect)
8 Colour Matching (Visual)
9 Colour Matching (Instrumental)
10 Metamerism Index
11 Gloss
12 Wet Adhesion
13 Chip resistance
14 Immersion Primer
15 Machinability
16 Superior weathering for gloss and colour retention

Closed

16-01516

Metals and Alloys

Materials Laboratory needed for Elemental analysis: Carbon and hydrogen (C H analysis), C% and H%

Closed

16-01503

Metals and Alloys

Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks (or 1,2,3..months) later ,some of panels occur delamination problem? (Some of Project; We saw after the installation,after the fabrication ..) (Peeling test should be minimum 18 kg/25 mm)

Closed

16-01457

Metals and Alloys

Mining laboratory needed for lithium ore testing from mining site prospecting.

Closed

16-01322

Metals and Alloys

Metallurgical Laboratory needed for Gold purity testing

Closed

16-01299

Metals and Alloys

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Material should meet the requirements of AMS QQ-A-225/8A. Please provide quote and delivery time. Thank you.

Closed

16-01212

Metals and Alloys

Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Material should meet the requirements of AMS QQ-A-225/8A. Please provide quote and delivery time. Thank you.

Closed

16-01207

Metals and Alloys

Microbiology Laboratory needed for ASTM bacteria resistance testing on a lubricant according to ASTM E2275, Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance.

Closed

16-01145

Metals and Alloys

Metallurgical laboratory chemical analysis (ICP analysis) to be carried out on crushed and grinded catalyst converter powder. Extensive test is needed to show grams of each metal substance in the mix.

Closed

16-01132

Metals and Alloys

Physical laboratory needed chair testing to test structural welding on a metal chair

Closed

16-01067

Metals and Alloys

Analytical chemistry laboratory needed for petroleum wax testing

Closed

16-01062

Metals and Alloys

Mining company needs laboratory for chemical testing, elements/Elemental Analysis Testing & machinery function

Closed

16-00986

Metals and Alloys

India metallurgical laboratory needed for metals testing for platinum, palladium, and gold

Closed

16-00931

Metals and Alloys

Metal FInishing company needs toxicology laboratory for toxicity studies of liquid products for Eye irritation, Skin irritation, Acute oral toxicity, Acute dermal toxicity, and Inhalation toxicity. One product was tested many years ago, we would like to have updated results and a comparison to a newer product.
Original results found lower limits for LD50 values, the only result which was eye irritation.

Closed

16-00860

Metals and Alloys

Southern California company needs laboratory for identification testing of growth on aluminum metal surface. These is pitting, approximately 0.5 cm wide, in the surface of the metal piece and a rust colored growth can be seen within these pits. Please advise on necessary testing/pricing and timeline.

Closed

16-00834

Metals and Alloys

Materials laboratory needed for physical testing of machine part that has Sulphuric Anodization on Aluminium that require following testing.


a. Insulation of the oxide coating (Disruptive voltage test)
b. Sealing quality ? to measure loss of the absorptivity of the anodic oxide coating
c. Continuity of oxide coating
d. Light resistance test

Closed

16-00828

Metals and Alloys

Materials laboratory needed for ASTM Testing of chemical composition of galvalume coating. and the methodology.

Closed

16-00629

Metals and Alloys

Physical Laboratory needed for ANSI/ IEEE Arc Resistant testing of MV Metal Clad Panel to ANSI/IEEE C37.20.7 40kA 0,3/0,5s ? 13,8kV ? 60Hz Please specify the information for commercial conditions for the test

Closed

16-00140

Metals and Alloys

Metallurgical laboratory needed for Elemental Analysis
C
H
N
S
Cu

Closed

11-02206

Metals and Alloys

Metallurgical Materials Laboratory needed for flashpoint testing: Flux for a flash point. (Solvent base flux system used internally for the final product).

Closed

06-1404

Metals and Alloys

ISO Metallurgy laboratory needed for ICP testing of metals and alloys: Carbon and sulfur by combustion, Interstitial gases, H, N and O

Closed

04-0029

Metals and Alloys

US based GMP Lab needed to perform Bioassay for Protease activity for California biopharmaceutical company

Closed

04-0028

Metals and Alloys

Toxicity testing for liquid serum for EPA registration as disinfectant and surfactant. Lab in Western US State preferred.

Closed

04-0027

Metals and Alloys

vibrio cholera testing of mussels for food firm by GMP lab to US FDA requirements

Closed

04-0026

Metals and Alloys

Multinational biopharmaceutical company needs laboratory to perform the following tests in rodents:blood glucose, blood V, blood TH (TSH/T3) and Blood PTH/Ca

Closed

04-0025

Metals and Alloys

Large Canadian pharmaceutical firm needs a contract lab for Raw Materials Testing for Sorbitol that can test for lead and nickel using an AA or ICP instrument. The specifications of the tests are lead, [EP (2.4.10) limit NMT 0.5ppm], and nickel [EP (2.4.15) limit NMT 1ppm]

Closed

04-0024

Metals and Alloys

Disinfectants Effectiveness Study for very large, California based medical device firm

Closed

04-0023

Metals and Alloys

techniques pour l'étalonnage d'une équerre ; la viscosité ... (from firm in Casablanca)

Closed

04-0022

Metals and Alloys

Marine Toxin ( eg Pectenotoxin in shellfish) testing by ISO accredited lab

Closed

04-0021

Metals and Alloys

HPLC Purity and content of phospholipids for California pharmaceutical company

Closed

04-0020

Metals and Alloys

Individual Antibiotic Test in Tea for Consumer

Closed

04-0019

Metals and Alloys

GMP Compliant lab to perform the following: Full Monograph Testing (individual and total) for the following items:·,Magnesium Stearate·,Maltodextin·,Polyethylene Glycol·,Silicon Dioxide,·Stearic Acid·,Croscarmellose Sodium,,Dibasic Calcium Phosphate·,Lactose Monohydrate·, Specific Rotation for Ephedrine HCl·,Diphenhydramine HCl Organic Nitrogenous Bases for a pharmaceutical company

Closed

04-0018

Metals and Alloys

e-tests for mupirocin gram stain for leucocytes, staph and strep

Closed

04-0017

Metals and Alloys

GLP POLARIMETRY TESTING. LAB MUST BE IN CANADA AND MUST CONFIRM TO GLP STANDARDS

Closed

04-0016

Metals and Alloys

GLP Would like to analyse 3 water soluble samples (plant extract to be used as cosmetic ingredients) for their SOD and antiperoxyl activites

Closed

04-0015

Metals and Alloys

Looking for a lab that can certify an all-purpose cleaner for toxicity

Closed

04-0014

Metals and Alloys

GLP repeat dose acute toxicology studies for vaccines.

Closed

04-0013

Metals and Alloys

assess the androgenic activity, in a quantitative fashion, of a single steriod with the trivial name tetrahydrogestrinone(THG) in a pilot scale study. Either an aquatic organism model or rodent model would appear adequate to provide the information desired but other potential testing types will be considered such as in-vitro receptor binding studies. The study should compare the relative androgenicity of THG to a reference compound such as testosterone

Closed

04-0012

Metals and Alloys

Preservative efficacy test to be performed during the following year. Number of samples and products to be determined. Preferred labs in Ireland or UK

Closed

04-0011

Metals and Alloys

Testing of protein toxicity. GLP compliance needed.

Closed

04-0007

Metals and Alloys

Gas Chromatography. Chemical structure by volume of element, analysis of liquids and solids

Closed

04-0006

Metals and Alloys

Pyruvic acid test

Closed

04-0005

Metals and Alloys

Carbon & Oxygen by combustion analysis. Analysis will be performed on a metal powder. Laboratory must be GLP compliant. Prefer Lab in Canada, but not necessary)

Closed

04-0004

Metals and Alloys

The same microorganism has been recovered from two different sources, Need to know if they are the same strain

Closed

04-0002

Metals and Alloys

Quantification of crystalline Hgh

Closed

03-0036

Metals and Alloys

Lab. to have a Radon Test Kits tested in Ontario, Canada

Closed

03-0035

Metals and Alloys

chronic toxicity tests, one in sediment and one in water, for zooplankton. Also, a chronic toxicity test for a benthic invertebrate, the midge for example if available, for water

Closed

03-0034

Metals and Alloys

Canada Consumer Product Safety Textiles laboratory needed for DIN4102(B1) certification in Canada or near by.

Closed

03-0033

Metals and Alloys

Heavy metals testing and FDA extraction testing on printed & folded coupons. (USA)

Closed

03-0032

Metals and Alloys

USA toxicology Laboratory needed for skin irritation/sensitisation testing to ISO 10993-10 on polythene film samples. (UK)

Closed

03-0031

Metals and Alloys

Pharmaceutical Laboratory needed for Residual Moisture Content analysis (e.g. Karl-Fisher analysis ) on lyophilized cake. All excipients in the formulation safely handled under BL 1 conditions. Fast Turn Around Times a must. Laboratory should be in the contiguous United States.

Closed

03-0030

Metals and Alloys

Pharmaceutical Laboratory needed for Osmolality measurements on reconsituted lyophilized formulation. All excipients in the formulation safely handled under BL 1 conditions. Fast Turn Around Times a must. Laboratory should be in the contiguous United States.

Closed

03-0028

Metals and Alloys

Bioanalytical Laboratory needed for Vitamin detection on Fetal Bovine Serum. Following is a list of vitamins and detectable units:
Vitamin B-12 pg/mL
Folic Acid ng/mL
Vitamin B-6 ng/mL
Thiamin B-1 ng/mL
Niacin ug/mL
Vitamin H Biotin pg/mL
Riboflavin B2 ng/mL
Vitamin A Retinol ng/mL
Vitamin C ng/mL
A-Tocopherol ug/mL
Carotene ug/mL

Closed

03-0027

Metals and Alloys

ENvironmental microbiology laboratory needed for environmental mold issues

Closed

03-0025

Metals and Alloys

Microbiology Laboratory needed for Minimum Inhibitory concentration (MIC) determination ,using dilution method

Closed

03-0024

Metals and Alloys

Microbiology Laboratory needed for disinfectant efficacy testing

Closed

03-0023

Metals and Alloys

EPA GLP certified ENvironmental Laboratory needed that is familiar with EPA tests in LA county

Closed

03-0021

Metals and Alloys

ISO Toxicology laboratory needed for In-vitro Toxicology Studies: Cyto-toxicity test to ISO 10993-5

Closed

03-0020

Metals and Alloys

Preclinical Laboratory needed for antiviral assay on coronaviruses using our pharmaceutical product(s)

Closed

03-0018

Metals and Alloys

Contract Service Preclinical Laboratory to perform an IND enabling FDA GLP toxicology study

Closed

03-0017

Metals and Alloys

Consumer Testing for identity testing of capsules

Closed

03-0016

Metals and Alloys

Preclinical Contract Research Organization needed for Periodic platelet testing in rats

Closed

03-0015

Metals and Alloys

Clinical Contract Research Organization needed for clinical blood testing of rifampin levels in pediatric patients' blood

Closed

03-0012

Metals and Alloys

Microbiology Laboratory needed for microbial analysis SB 3112. The test material consisted of only the bacterial spores at a count of 55 x 107 cfu/ml. The tests were run in compliance with the following protocols: 1 USEPA FIFRA;GLP Standards 40 CFR 160 2 USEPA TSCA 40 CFR 792 3 Org. Economic Coop. and Dev. Principles of GLP, Annex 2, C(97)186 4 Japan Ministry of Ag, Forestry & Fisheries, Notification No. 59 Noshan 3850, Director-General of Agricultural Prod. Bureau, 10 Aug 84

Closed

03-0011

Metals and Alloys

Analytical Chemistry Laboratory needed for solvent gas chromatography testing of three solvent samples for assay analysis on GC ASAP. Product is very pure ethly lactate.

Closed

03-0010

Metals and Alloys

FDA Extraction Test on furnished litho printed coupon paper. Also to do heavy metals testing onfurnished litho inks

Closed

03-0009

Metals and Alloys

bioanalytical laboratory needed for bioanalytical testing done on a drug call serostim (hgh)

Closed

03-0007

Metals and Alloys

Preclinical toxicology laboratory needed for Cytotoxicity studies: MEM Elution Sample Amount: 120 cm2 or 4 grams Irritation: Intracutaneous Reactivity (ISO) (w/2 extracts) Sample Amount: 240 cm2 or 8 grams Sensitization: Magnusson-Kligman (w/2 extracts) Sample Amount 600 cm2 or 32 grams (6 samples minimum) Sensitization: Local Lymph Node Assay: Sample Amount 400 cm2 or 20 grams

Closed

03-0006

Metals and Alloys

Micrbiology Laboratory needed for Microbial Barrier Properties Analysis on Packaging Material

Closed

03-0005

Metals and Alloys

Dietary SUpplement Mfg needs FDA analytical chemistry laboratory that can extract herbs supplied by my company of up to 25 times concentration (25:1)

Closed

03-0004

Metals and Alloys

University needs Wisconsin Microbiology laboratory TOC (Total Organic Carbon) testing for water analysis on water samples

Closed

03-0002

Metals and Alloys

Microbiology Laboratory needed for Microbiology Analysis (Total Plate Count, Yeast, Mold, E. Coli, Salmonella) for 78 Raw Materials

Closed

Submit Metals and Alloys Testing Requests for Metals and Alloys testing and Metals and Alloys Scientific Research