Incoming Manufacturing and Production Laboratory Test Requests

Contract Laboratory has received the following Manufacturing and Production Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Manufacturing and Production Laboratories to perform their Manufacturing and Production Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Manufacturing and Production laboratory that would like more information on these Manufacturing and Production projects, please visit our registration page or call toll us free 1-855-377-6821.

Below are our 50 most recent Manufacturing and Production laboratory test requests. Please log in to see more.

17-00970

Manufacturing and Production

LONG-TERM TESTING Metallurgic laboratory needed for ASTM grain size testing on Ni 200 rolled sheet that has been cold worked in multiple operations to ASTM E112, Standard Test Methods for Determining Average Grain Size. We will require multiple analyses over an extended period of time.

Closed

17-00944

Manufacturing and Production

Engineering company needs metallurgical laboratory for corrosion investigation of rotating bottle apparatus.

Closed

17-00768

Manufacturing and Production

URGENT TESTING: Large corporation needs industrial hygiene laboratory for equipment cleaning validation study testing using Texwipe TX751 to test for the antibiotic telafloxacin; 84 swabs (maximum allowed is 200mcg per sample); and Texwipe TX714K to test for the cleaning agent Cip100 84 swabs (maximum allowed per sample of 200mcg)

Closed

17-00634

Manufacturing and Production

Contract laboratory needed for accelerated product life testing on turnkey automation and lighting solutions used in hospitality industry.

Closed

17-00626

Manufacturing and Production

Large electronics company needs product safety laboratory for fall hazard, structural integrity / physical stability / product safety testing of a commercial product to ensure it does not present "fall" or "tilt" hazard.

Closed

17-00594

Manufacturing and Production

Large corporation needs metals materials laboratory for RoHS testing for plain-carbon steel wires of various sizes, grades, and treatments. Wire is in continuous length, but can be cut to length needed for testing. Diameters range from 0.034 to 0.625.

Closed

17-00476

Manufacturing and Production

Automotive Parts Company needs VW validated materials laboratory for VW Testing to VW 50180 odor test

Closed

17-00277

Manufacturing and Production

Industrial laboratory needed for elastic modulus testing of a textile conveyor belt as per DIN EN ISO 9856.

Closed

17-00217

Manufacturing and Production

LONG TERM TESTING . Analytical chemistry laboratory needed for cannabis testing by HPLC-uv for Rhynchophylline and Speciophylline alkaloid content

Closed

17-00087

Manufacturing and Production

ASTM metallurgical laboratory needed for testing gold plated coupons made with copper or aluminum bases for Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resistance(Porosity) and Reflectivity all according to ASTM standards.

Closed

16-02470

Manufacturing and Production

FDA Consumer Products Safety Laboratory needed for sunglasses testing to meet FDA regulations for importation.

Closed

16-02310

Manufacturing and Production

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold Rolled sheet metal parts with compound surfaces; Size of Part ranges from 120 mm diameter X 100 mm in Length.

Closed

16-02294

Manufacturing and Production

Materials Laboratory needed for 3000 hour accelerated aging testing of plastic connector made from polyamide 66+ 30% glass fiber, in order to see the status after 3000 hours of functioning for our plastic item ?Connector?.

Closed

16-02282

Manufacturing and Production

Global pharmaceutical manufacturing (advanced chemical synthesis) company needs testing of 2-3 samples of Polysorbate 80 and 2-3 samples of Polysorbate 20 for full specifications as outlined by USP/NF, European Pharmacopeia, and the Japanese Pharmacopeia.

Closed

16-02280

Manufacturing and Production

UK Company needs a laboratory to test Adipic Acid as a raw material for to be used in manufacturing for:
1. Purity
2. Heavy metals residue (to the ppm and ppb levels)
3. Other impurities such as byproducts from the manufacturing process (succinic acid, Caproic acid ? etc.)
4. Volatile and semi-volatile impurities. (by LCMS for example)


Closed

16-02277

Manufacturing and Production

Large manufacturer of electro-mechanical products for the aerospace industry needs test facility for various types of compliance testing per DO160G and BS.3G.100,Part 2.

Closed

16-02229

Manufacturing and Production

Manufacturer needs electrical laboratory for IEC Testing of Welding machine test per tto IEC 60971-1, Semiconductor convertors. Identification code for convertor connections

Closed

16-02189

Manufacturing and Production

Manufacturer of rubber parts needs materials laboratory for UL certification testing for a gasket.

Closed

16-02044

Manufacturing and Production

Analytical Laboratory with validated EPA method for analysis for unreacted (free) Ethylene Oxide content in surfactant samples using the most current EPA published methodology.

Closed

16-02028

Manufacturing and Production

Materials laboratory needed for crack testing in plastic parts

Closed

16-01968

Manufacturing and Production

Materials Laboratory needed for ASTM Testing of Processed woodcore Panel Board assemblies (using core material such as MDF / Particle Boards, Laminates, Edge Banding etc etc ).We are looking for Test Certification for ?ASTM E84-06a? for surface burning characteristics of the Finished Panel Board assemblies (where we would like for the Test to make specific reference to the actual assembled components for Wood-core Panels including core, Laminates and Edging.

Closed

16-01910

Manufacturing and Production

LONG-TERM TESTING Equipment manufacturer needs laboratory for swabbing and residue testing to detect presence of pharmaceuticals, chemicals, antibiotics, and/or hormones on equipment surfaces. Looking for a reliable supplier for multiple testing requirements throughout the year.

Closed

16-01846

Manufacturing and Production

Materials laboratory needed for analysis of particulate formation in natural oil wood finishes. We are having some particulates forming that we need to determine what is happening and ultimately how to prevent this in our manufacturing process.

Closed

16-01776

Manufacturing and Production

Medical Device Company needs medical technology laboratory for packaging/ product /development of developing a disposable medical cable assembly that will require sterilization. ABS plastic housing for connectors
Silicone vs PVC for cable assembly I have questions about cost, materials, packaging and logistics.

Closed

16-01774

Manufacturing and Production

Laboratory needed for study to determine the efficient method for determining amount of residual alcohol left over after sanitizing metal mixing equipment. The Equipment is sprayed with 70% Isopropanol and then wiped with rags. After waiting a set a amount of time, swabs are rubbed against the metal walls of the vessel to pull off any residual alcohol. We are trying to determine the best method for quantifying the amount captured by the swaps, and thus the amount remaining on the equipment.

Closed

16-01709

Manufacturing and Production

India Manufacturing Company needs metallurgical laboratory for silver alloy electrical contacts testing: detailed mineralogical analysis of industrial waste.

Closed

16-01617

Manufacturing and Production

Georgia laboratory needed for organic waste stream testinf for relative volumes and BOD of the following organic constituents in a supplied sample of organic waste stream? Celluloses, Starches, Triglycerides, Free Fatty Acids, Volatile Fatty Acids, Saccharides, Proteins, Amino Acids.

Closed

16-01503

Manufacturing and Production

Laboratory needed for failure analysis on metal composite delamination problem During the production,Test result of adhesion is ok but after 2,3 weeks (or 1,2,3..months) later ,some of panels occur delamination problem? (Some of Project; We saw after the installation,after the fabrication ..) (Peeling test should be minimum 18 kg/25 mm)

Closed

16-01442

Manufacturing and Production

Microbiology laboratory needed for microbiological testing of production facility including water testing and air testing of various areas around production lineincluding plastic closures, preforms and conveyors.. Microbiology testing to include mold/yeast, total bacterial, and coliform separately. Tap water in the production area will also be tested in the production area.

How do you go about and do these test. Does one of your technicans come on site or do I provide the samples?

Closed

16-01413

Manufacturing and Production

Environmental laboratory needed for sludge testing: Rotational Viscosity on a WWTP sludge sample

Closed

16-01299

Manufacturing and Production

Materials Laboratory needed for ASTM tensile testing to ASTM E8.,Standard Test Methods for Tension Testing of Metallic Materials. Flat tensile specimen will need to be machined according to ASTM E8 from 6061-T651 slug that is 2.75 in diameter and 8 in length. Material should meet the requirements of AMS QQ-A-225/8A. Please provide quote and delivery time. Thank you.

Closed

16-01226

Manufacturing and Production

ENGINEERING LABORATORY NEEDED FOR PROCESSING AND PROCESS DEVELOPMENT FOR PROCESSING OF GRAPHENE AT HIGH TEMPERATURES TO REMOVE IMPURITIES. COMPANY WISHES TO WORK MORE CLOSELY WITH LABORATORY TO IDENTIFY THE IDEAL CHEMISTRY TO ACHIEVE THIS . THE FIRM COULD ALSO CHOOSE TO BAKE THE GRAPHITE A TEMPS AS HIGH AS1500 DEGREES C .THIS WOULD ELIMINATE SOME OF THE IMPURITIES TO ACHIEVE 95% + AND ALSO KEEP THE MATERIAL VERY DRY ,

Closed

16-01224

Manufacturing and Production

FDA GMP Food Laboratory needed for formulation and manufacturing process development of milk made from sesame seeds (developing and customizing formulation), with all the high quality control standards including labeling and regulatory guidelines set out by the Food and Drug Administration (FDA).



Kind Regards,
Adriana Contreras
Cel. 954-6329008

Closed

16-01174

Manufacturing and Production

Laboratory needed for Environmental simulation testing including Temperature extremes , Humidity , temperature cycling , Thermal shock

Closed

16-01156

Manufacturing and Production

Laboratory needed for Deep Freezer and Ice Lined Refrigerator Testing to WHO / PQS standards:
WHO/PQS/E03/FZ01-VP.2, Refrigerators and freezers for storing vaccines and freezing water-packs for Deep Freezers &
WHO/PQS/E03/RF03-VP.2 for Ice Lined Refrigerator

Closed

16-01147

Manufacturing and Production

Analytical chemistry laboratory needed to measure impurities such a CO2 and CO in hydrogen plant output gas using gas chromatography

Closed

16-01143

Manufacturing and Production

Materials laboratory needed for rubber testing for Hexane extract, Thermal analysis (DSC, DMA, TGA) , EDX analysis (REM) of the material for heavy metals (Pb, Cr-VI, Hg, Cd), TDS-GCMS analysis of the material for softeners, Extractable matter (extration agent: n-hexane) % (Max)
Tg (tan ? max) on sheet material (°C), Shore A Hardness on sheet material @ -40°C For 144 Hrs, Corrosion resistance @ 100°C for 24 Hrs.

Closed

16-01126

Manufacturing and Production

Polymer Laboratory needed for optical density rating on a couple of pieces of polycarbonate. One would be a clear piece and the other a smoked grey piece. Both would be a .25 thick.

Closed

16-01122

Manufacturing and Production

Food bioanalytical laboratory needed to measure non protein nitrogen levels in milk/whey samples. There is less than 2% NPN ( including urea) but we need accurate measurement.

Closed

16-00993

Manufacturing and Production

Physical Laboratory needed for Coupler Slip test as per IS 16172,REINFORCEMENT COUPLERS FOR MECHANICAL SPLICES OF BARS IN CONCRETE - SPECIFICATION

Closed

16-00990

Manufacturing and Production

URGENT: Aerospace company needs Laboratory for ISO Testing: scratch test per ISO 1518 (airbus requirement).

Closed

16-00828

Manufacturing and Production

Materials laboratory needed for ASTM Testing of chemical composition of galvalume coating. and the methodology.

Closed

16-00648

Manufacturing and Production

Physical laboratory needed to provide a quote for high pressure testing - upto 30 KSI + High Temperature - to 400F testing More details after confirmation of interest in performing testing..

Closed

15-01951

Manufacturing and Production

Toronto Laboratory needed for Colou fastness wet and dry crocking testing

Closed

15-00967

Manufacturing and Production

Canada Environmental Monitoring Laboratory needed for sanitation swab testing for packaging equipment

Closed

14-00642

Manufacturing and Production

Manufacturer needs Polymer Laboratory for Materials Testing: ASTM Testing to ASTM D922, Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing , electrical insulation, nonrigid vinyl chloride polymer tubing

Closed

Submit Manufacturing and Production Testing Requests for Manufacturing and Production testing and Manufacturing and Production Scientific Research