Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Consumer Products Laboratories to perform their Consumer Products Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Consumer Products laboratory that would like more information on these Consumer Products projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Clinical research laboratory needed for BIS compliant consumer safety study including patch test and sting test for baby wipes: 1. Sensitive skin volunteers 2. RIPT on 24 screened volunteers as per BIS 3. In use tolerance for 2 weeks (24 volunteers) Review: By Ethics Committee Principle Investigator: Dermatologist
Cosmetics and Personal Care Products Manufacturer needs laboratory for microbiology and analytical chemistry testing of disinfectants / antiseptics / sanitizers to several BS EN standards including 1275:2005, 1276, 1500:2013, 1650:2008+A1:2013, 13623:2010,13697:2015, 13704:2002, 13727:2012+A2:2015, and 14348:2005
Consumer product laboratory needed for CPSC safety testing of an arts and crafts product constructed out of urethane, water based contact cement, hardboard, and paper.
Medical device company needs clinical product safety laboratory for in-vivo, in-vitro and microbiology testing of disposable feminine pads including:
Surface device testing with just contact to the skin or breached/compromised surface (due to labial contact). We will do a limited exposure (less than 24 hours) testing.
Microbiology testing as pads release oxygen and slightly acidify the pH within the pad once blood reaches our patented powder. We want to see if it has any effect on microbes.
Measure the pH after blood has entered the pad to see how the pH is affected after blood has entered.
Amount of oxygen released per pad, the amount of CO2 absorbed per pad and the amount of humidity absorbed per pad?
Pharmaceutical laboratory needed for ICH, FDA, and USP testing on OTC sunscreen API and finished topical products including: 1) stability test on our finished sunscreen products for the claimed shelf life of 3 years as per the US FDA requirement, 2) preservative challenge test as per the USP on finished sunscreen products, 3) assay and purity of the following active raw materials: avobenzone [INCI name : Butyl Methoxydibenzoylmethane] 2. homosalate 3. octocrylene 4. octisalate [INCI name : ethylhexyl salicylate] 5. oxybenzone [INCI name: benzophenone]
Please provide cost of each test, turnaround time estimate, and sample quantity required for assay and purity testing of each active API.
University researcher needs analytical chemistry laboratory for formulation study and expiration dating of natural oil based mosquito repellent.
Packaging laboratory needed for complete packaging testing of 7 SKU's of products including: material testing, and benchmark packaging Bottles: Drop test, seepage test, topload test Caps: Capping force test, torque test Labels: Fadeometer test, chamber test, resistance test - Rigids: Bottles, Caps, Jars - Flexibles: Labels, Films - Paper-based: Corrugates, Cartons - Others: Pumps, Tubes
It would be great if you could share your credentials outlining: - Specific tests you offer in the above categories - Turnaround time - Quotations
If you could give me a call today, I am happy to discuss our requirements in more detail.
Clinical Research Laboratory needed for clinical research of cosmetic grade two grades of Bentonite on Human skin: 1) Oil absorption properties of Bentonite on skin 2) Ability of Bentonite to remove Toxins, Pollutants, Pathogens from skin 3) Revitalization of tired skin 4) How bentonite is able to reduce pimples by absorbing excess sebum, reduces size of pores 5) Improve skin color after using bentonite and get natural glow
India Laboratory Needed: Third-Party Laboratory needed for biodegradibility testing of plastic consumer products and food products made from HDPE / LDPE / PP / LLDPE. by extrusion process with the addition of bio-degradable additives. We require our product to be tested for percentage of bio-degradibility, self life of product, composition, etc.
Pharmaceutical laboratory needed for USP Testing to USP 39 of 190 Proof Organic Corn Alcohol (Ethanol) for Organic Impurities (Methanol, Acetaldehyde and acetal, Benzene, Sum of all other impurities) plus testing Organic Vegetable Glycerin for Diethylene Glycol and possibly heavy metals (Specifically Lead, Cadmium, Mercury and Arsenic)
Cosmetic Testing Needed : Need research to formulate an ingredients list. The ingredients would need to be mostly organic. The purpose would be to combine gel like forming powders(including an oil for fragrance) into a fine powder. Then by mixing the powder with hot water, it would create a hard gel like substance that would harden into a thin flat shape by refrigeration. The gel would need to be strong enough to maintain its shape, but be flexible enough to be handled by the user.
Clinical Research Laboratory needed for anti-aging Cosmetics research testing of skin moisturizer, anti-aging cream, shampoos and face pack. Research Studies for publication. ? Skin irritation test ? Eye irritation test ? Stability studies ? Sensation of feeling after applying ? % of moisture content on skin after applying ? All face cream test ? Dirt cleaning action ? Softness of the skin after wash ? Skin tone appliance ? Disappearance of sentence of the skin ? Physical appearance ? pH ? Acid value ? Ash value ? Rheological evaluation (viscosity) ? Dirt dispersion ? % of solid contents ? Cleaning action ? Surface tension ? Detergency ability ? Foaming ability ? Surface characterization stability study ? Homogeneity test ? Removal test ? Saponification value ? Skin sensitization ? Eye irritation tes
Laboratory needed for furniture testing of murphy-type bed: cycle testing of the wallbed up and down which, because of the integrated design, will also be cycle testing the sofa folding mechanism. We also need the standard array of cycle tests to the sofa unit itself, as if it was a free-standing sofa. So, it is all cycle-type testing but it is both wallbed and sofa testing.
Consumer Products Laboratory needed for clinical testing of Hair Towel to show that our product is better for hair than terry cloth and microfiber, does not cause breaks, frizz and flyaways. And need comparable testing using terry cloth and microfiber that shows they cause breaks, frizz and flyaways.
Company developing new line of towels needs consumer products laboratory for laundering test study: AATCC 96 testing (Dimensional Stability to Commercial Laundry). to show they can withstand frequent high-temp commercial laundry conditions at our customers' large yoga studios. I need to reach below temperatures:wash = 170F (at least)dry = 190F (at least)
Cosmetics Clinical Research Facility needed for UVB protectio study on human subjects: A sun protection factor (SPF) of 30 or higher. Validation of the SPF number by testing on 10 human subjects. UVA Protection: A critical wavelength of 370. Learn more about this test. Acceptable results for both phototoxic reactions and contact irritancy testing on 20 human subjects.
Consumer Products Laboratory needed for SPF Testing of sun tanning oil with SPF 15. Static SPF and the ISO 24443 (2010) UVAPF - AS/NZS 2604 (2012) Broad Spectrum Test. Please advise approximate testing times, cost breakdown, sample product volume for testing and any additional information you require from us.Sun tanning oil with SPF15, the active ingredients are Avobenzone, Octocrylene & Methoxycinnamate. We would also like to make sure we are compliment with Aus/NZ, USA & EU standards.
We hope to hear from you soon.
Clinical Research Organization needed for clinical research study of 10 toothpastes in EU: cleaning effect effect of desensitization inflammatory effect deodorizing effect anticavities (anti tooth-decay) effect remineralizing effect hemostatic effect sensitizing and allergenic effect antimicrobial effect whiterning effect antioxidative effect effect of pH-normalized oral balance measuring the viscosity of saliva before and after use What will be the price and the time of this clinical research? (some tests may be in vitro or used 3D models or clinical research) Please specify the price of this study.
LONG-TERM TESTING Manufacturer needs US Textiles laboratory needed for washing testing on a garment( Baseball cardigan) produced in Europe for US brand. Please specify costs for washing-test and how long do you need to issue report after you received our production-sample
budding small business owner looking to start a clothing line needs consumer safety laboratory for children's safety testing for little girls aged 5-9 years. These dresses will be handcrafted dresses in India from organic cotton fabric. My queries are the following: 1.How can I make my product compliant for the children's safety certification in the US? 2.What is the precise and correct way for the garments to be labeled?
Analytical chemistry laboratory needed for HPLC, SEM, or FTIR soap testing for Identification of white powder being formed soap bars being manufactured in large quantities after the curing process. The white powder just started forming after larger amounts of organic caffeine was added during the mixing process and the soap bars are curing for more than 48 hours. Pictures can be provided with a basic microscopeexam with 1,000x magnification to determine that this powder was not mold, however, the lab I used does not have HPLC, SEM, or FTIR available for further testing.
I believe that the white powder could be either soda ash (sodium carbonate) or possibly caffeine, since we add organic caffeine powder to the soap bar. A quick Google search reveals that many lye soap manufacturers have issues with a white powder on their soap bars whi
Microbiology Laboratory needed for Disinfectant Efficacy Challenge testing for 5 Pathogens. Spores, Viruses, Mycobacteria, Fungi, Bacteria on Disinfectant Detergent Wipes to European quantitative suspension tests required EN13704/EN14347/EN1275/EN1650/EN14562/EN14476/EN14348/EN1276/EN14561/EN13697/EN13727
Consumer Products Laboratory needed for ASCM (?) and the US Product Safety Commission testing child safety consumer panel testing of plastic grocery bag with locking mechanism that prevents children five and under from entering it. The bag also needs to be tested on adults to see if the can open and close it.
Laboratory needed for multiple testing on hand sanitizer 1. Glove Compatibility: The influence of Instant hand sanitizer on nitrile and latex gloves was tested using a modified ASTM D-5151 method. 2. CHG Compatibility: The compatibility of Instant hand sanitizer with CHG was tested using appropriate methods. 3. Non-food Tainting: tested according to ?Sensory Analysis-Methodology-Triangle Test BS EN ISO 4120:2007. 4. Skin Compatibility Test: The 48hr Single Patch Test 5. UL ECOLOGO Standard UL 2783. 6. USDA BioPreferred. 7. NSF E3 Certification Also recommend any other appropriate tests available and testing charges
FDA Electrical medical device laboratory needed for Skin massager testing: 2. FDA Product Code : PBX 3. Performance test standard ? IEC 60601-1: Medical Electrical Equipment - Part 1: General Requirements For Basic Safety And Essential Performance. ? IEC 60601-1-2: Medical Electrical Equipment - Part 1-2: General Requirements For Basic Safety And Essential Performance - Collateral Standard: Electromagnetic Compatibility ? Requirements And Tests. ? IEC 60601-2-2: Medical Electrical Equipment - Part 2-2: Particular Requirements For The Basic Safety And Essential Performance Of High Frequency Surgical Equipment And High Frequency Surgical Accessories. ? IEC 60601-2-57: Particular Requirements For The Basic Safety And Essential Performance Of Non-Laser Light Source Equipment Intended For Therapeutic, Diagnostic, Monitoring And Cosme
Consumer products company needed for personal lubricant testing to analyze ingredients in two of personal lubricants for:
Water Sorbitol Glycerin Hydroxyethlcellulose Sodium Benzoate Potassium Sorbate Lactic Acid
Please provide quote and lead time.
RFP: Consumer Products Laboratory needed to conduct consumer fragrance research study in either Chicago, Boston, or Dallas. We would like to bring in N=100 consumers to sniff 8 different fragrances. Each fragrance would need to have its own room and testers would rotate between rooms. Please contact us ASAP for the RFP with all the details.
Medical Device CE Mark microbiology certification laboratory needed for CE certification testing of opthalmology multi purpose contact lens solution. CE require the following three new tests for multi purpose solution. 1) Antimicrobial activity test in accordance with ISO 14729. 2) Compatibility test between contact lens care products and contact lenses performed according to ISO11981 3) Preservative efficacy test according to ISO14730 Please specify the estimated price and testing time for each tests if that is available
Company developing new Organic and Natural product in the Baby personal, cleaning, food, diaper categories needs consumer products laboratory for third-party certification, reliability, efficacy and toxicity testing.
Please specificy your service offering and prices.
LONG-TERM QUALITY CONTROL TESTING: Large cosmetics company needs contract lab that can perform XRF (X-Ray Fluorescence) testing. The testing would be performed as part of an Identification test on incoming raw material receipts. The test would be qualitative only (not quantitative) to detect the presence of various elements such as Fe, Mg, S, Al, Si, Zn, or Ti. I have specifications that specify exactly which element(s) to test for each sample. Usually 1-2 elements per sample. I have a test method that gives more specifics if needed. Anticipated sample volume is approximately 10 per week. Thank you.
India Analytical Chemistry Laboratory needed for Reverse engineering and formulations of sugar wax from list of ingredients but not the quantity of each ingredients.. The composition of each ingredients in the sample, formula of the sample and ways to improve
Materials laboratory needed for ASTM boat cleaner testing on fiberglass and wood to determine it is effective and non-harmful in cleaning grease, oil, gas, scum and marine growth from boat hulls that comprise of fiberglass and wood and will not harm the surface as well. Our product is biodegradable and safe for the environment.
LEGAL California attorney needs textile laboratory for fire retardation / flammability testing of fabric used in shirt. Attorney who is thinking about taking on a personal injury case that involves a woman whose shirt caught on fire. Before I take the case, I need to know whether the fabric her shirt was made out of meets government standards for fire resistance/fire retardation.
India consumer products laboratory needed for development testing on herbal mosquito repellent voporizer to adjust the evaporation rates. Currently essential oil smell not evaporated from veporizer. There is no equal evaporation from veporizer liquid. Some residue remain.
UK cosmetics laboratory needed for full quality control testing and analyses needed for the soap industry including all raw materials (oil, water...) and finished products to to assure that the soap production is controlled and meet the EU standards and regulations
Consumer Products Performance Laboratory needed for Claims testing for eyeglass lens cleaning wipe to support claims: Non Scratching, Non Streaking, Non Linting, fast drying. The wipe is a 14cm x 14cm 100% pulp based substrate impregnated with an IPA based solution. Testing should be performed on the following Lens types: Glass eyeglass, Plastic eyeglass and polarized sunglasses
Premium cigar company needs product development laboratory to develop a humidification product to regulate humidity levels, both increase and decrease, in an enclosed space, to a specific desired level.
Social enterprise needs Asia Consumer Products laboratory for soap safety testing to ensure soap is safe to use.prior to distribution to hygiene program for local disadvantaged communities.
Consumer Products Safety Laboratory needed for safety certification testing on a new baby product apparatus to support a baby swing.
GLP Consumer Products Safety Laboratory needed for OECD toxicology testing in digital inks for safety data sheets. In particular it would need: - In vitro skin irritation / corrosion dermal, OECD 431 - In vitro eye irritation / corrosion, corneal opacity test, OECD 437 - Acute dermal toxicity OECD 402 - Acute toxicity in algae, OECG 201 An european laboratory is preferred
India consumer healthcare firm needs microbiology laboratory for microbiological testing for routine stability studies. MET and AET) our routine stability samples.
India consumer products laboratory needed for baby diaper testing to check samples sent by exporters
India consumer products safety laboratory needed for natural Mosquito Repellent certificaiton testing. Mosquito Repellent formulation is in Spray, Vaporizer & Lotion from natural ingredients.
Consumer Products Safety Laboratory needed for safety testing of 6ft high, rotating, wooden magazine display racks.
Personal care company needs consumer products laboratory for stability and sensory panel studies: Sensory panel evaluations for a new line of products for which the sensory experience will be critical to overall performance: spreadability, feel and after feel (smoothness, slipperiness, silkiness, greasiness, tackiness, wetness), feel during application (cushiness, play time, adherence), absorbency and moisturizing effect.
Consumer Products Laboratory needed for quality control testing of 5 natural organic baby products to ensure they are safe and effective. BabySoap, Bath & Massage Oil, Bug Spray, Bottom Mist, and Lotion Bar.
Mumbai consumer products laboratory needed for incense stick testing for quality and fragrance.
Consumer Products Laboratory needed for comparison study on the performance of laundry detergents, dish soap and hand soap to competitor's products
Consumer Products Safety Laboratory needed for product safety testing of Black Castor oil for use on hair & skin..
Independent consumer products safety laboratory needed for Amazon Safety Assessment Testing of natural deodorant made of coconut oil, shea butter, candelilla wax, baking soda, corn starch and essential oils. A product testing document or safety assessment from an independent laboratory or consulting company. This document usually shows an analysis of the ingredients in the product.
Large consumer products company needs Mumbai laboratory for vegetable oil testing to test the oxidative stability of vegetable oils supplemented with antioxidants under accelerated conditions using Rancimat instrument.
Manufacturer needs Consumer Products Safety Toxicology Laboratory for product safety and toxicology testing of fabric-based product.for
- Cytotoxicity testing. - Sensitization testing. - Irritation or Intracutaneous Reactivity Testing - Specific testing on Urethane materials: 0 mmHg for 3s to 150 mmHg and hold for 3s for a minimum of 100,000 cycles.
United States FDA GMP Consumer Products safety Laboratory for all testing needed for FDA certification registration document on all natural hair product
India physical laboratory needed to test Hardboard strength, water absorption etc. Kindly advice oncharges, time etc. with courier services
USA CONSUMER PRODUCTS LABORATORY NEEDED FOR SHOE TESTING: DROP TEST ON THE HEEL OF SHOES
Consumer Product Safety Laboratory needed for Drop Ball testing of Class 1 Medical Device - Sunglasses. Testing of 500 units
Consumer Products Safety Laboratory needed for Simple safety assessment on 3 products to satisfy Amazon requirements. Laboratory needed that has dealt with Amazon Health and Personal Care approval before.
European Union consumer products laboratory needed for Tests in order to support the claim 'Dermatologically tested' for cosmetic products sold within the EU.The products are face masks.
Chicago / Detroit analytical chemistry laboratory needed for sulfite testin in liquid spray product before and after the product is sprayed. Please provide pricing as well as terms.
Company in beginning stages of trademarked product needs microbiology laboratory for stability and microbiology testing to determine shelf-life
COnsumer Products Safety Laboratory needed for safety assessemnt to Amazon seller requirement: product testing document OR safety assessment document. My product is made of polypropylene (PP) and touches only the contact lens case, not the lenses themselves.
URGENT South Africa consumer products safety labroatory needed for all safety and performance tests needed for wooden match sticks in a box to allow for import of product into different countries. Most importantly we need the following tests to please be carried out ; 1) the test for performance of a striking surface and 2) the test for damp proofness .
Consumer Products Safety Laboratory needed for a nutraceutical testing: toxicology test (toxicology verification) performed on an ingredient for a NDIN application to provide satisfactory results that support our safety claims.
Large Consumer Products company needs packaging laboratory for ASTM high altitude transporation simulation testing including subject packaged product to a change in vacuum pressure in order to simulate altitude for transportation test of packaging. The product is pouch in a display carton.
FDA cGMP Consumer Products Laboratory needed for consumer products testing including sensory testing, comparison studies testing, consumer panel testing, Analytical Chemistry Testing, nutritional testing Vitamins Testing Anti-Oxidant testing Minerals Testing Heavy Metals Testing Amino Acids Profiles Testing Enzyme testing
clinical testing Calories Testing Carbohydrates Testing Athsma Testing
Anti-oxidants Testing Mercury content Testing Metabolic Studies Testing label verification testing Child safe Testing product comparison testing FDA GMP testing
Consumer Products Laboratory needed for ASTM Testing on Shaving Brush for Ross Compliance - 3 samples
FDA GMP and Health Canada consumer products laboratory needed for child safety testing of new baby product that will be used on babies and infants. It is a body and bum spray based on natural oils. We need to determine whether it's safe to use on infants and the estimated shelf life given that we use natural preservatives.
India consumer products laboratory needed for ASTM Testing of shaving brush for safety of material contents as well as safety for use on skin. This is for Ross Compliance
Nail polish company needs consumer products safety laboratory familiar with Europe Testing Requeirements for nail polish testing (micro stability, chemistry1) Formulation 2) Material Safety Data Sheet for all added ingredients (pigments, glitter etc included) 3) COA test for all added ingredients (Certification of analys) 4) Stability test for the product. (See the attached document below) 5) Method of manufacture - overview of the method of manufacture including storage and filling, (a summary of the process) Cosmetic product safety information 1. Quantitative and qualitative composition of the cosmetic product Table 1. Quantitative and qualitative composition of XXXXXXX INCI Name CAS No (EINECS No) % (w/w) Supplier Function Aqua 7732-18-5 231-791-2 to100% Glycerin 56-81-5 200-289-5 2 / 2. Physical/chemical characteristics and stabilit
EUrope Consumer Products Laboratory needed for Product Safety Testing of Herbal Bath Product.
Ireland consumer products laboratory needed for consumer product safety testing of baby skincream. Determine if any ingredients in a skin cream are dangerous to skin.
Consumer Products Laboratory needed for Skin care products safety testing. Overall testing product to be sure it can be deemed suitable for marketplace.
Consumer Products Laboratory needed for Safety Assessment product testing of bath products to provide assurance that the product is safe to be used by people.
USA Consumer Products Laboratory needed for third party product compliance testing on drawstring backpacks.
Pharmaceutical Company needs consumer products laboratory for sensory testing: Taste evaluation of an oral dissolving product
Consumer Products Safety Laboratory needed for safety testing for Amazon Standards under the healthcare category or a dry wash cloth embedded with soap and there is not need to rising after bath.
Consumer Products / Animal Health Laboratory needed for Safety Testing for Amazon: "Product testing documentation for the products you manufacture and intend to sell (e.g., a report from an independent laboratory stating the ingredients in the product, or stating the safety of the product)"
Consumer Products Laboratory needed for Fashion Accessory Testing to ASTM F963 Standard Consumer Safety Specification for Toy Safety for small parts and strangulation
USA cosmetics consumer products laboratory needed for simulation of tweezer usage testing. Technical testing on different eyebrow tweezers and report findings on key attributes: Metal Grade, Tip Strength, Durability, Tip Precision/Angle, Sharpness and Weight & Balance to identify and quantify tangible points of differentiation.
Consumer Products Laboratory needed for comparison testing of hair dryer. Comparative Study to show that hair dyer dries hair X% faster than comparison product
COnsumer Products Textiles Laboratory needed for effectiveness testing of laundry detergent and stain remover
Florida dermatology consumer products laboratory needed for cosmetics testing of facial cream ingredient formula given
Large Consumer Products Company needs polymer physical chemistry laboratory for Pore size distribution and porosity Pore characterization of hollow fiber polymer membranes
Consumer Products Safety Laboratory needed for disposable slipper testing: Amazon.com Consumer Safety Assessment testing on disposable salon/spa slippers and pedicure toe separators to sell product on Amazon.
Consumer Products Safety Laboratory needed for Amazon.com product safety assessment document of a room & body mist just made of distilled water and essential oils.
USA consumer product safety laboratory needed for Amazon.com safety assessment testing of shaving product. To be sold on Amazon in the "Personsal Care" department and Amazon requires a "Product Testing Document" or a "Safety assessment document. My product is a very simple device used to assist in shaving. It contains no paint and does not come with a razor.
Natural products company needs consumer products laboratory for natural cleaner comparison testing against conventional cleaning product
FDA consumer products laboratory needed for thermal testing of raw quartz crystals. FDIR/UV Radiation, Thermal Microwave in nano-meters. We need to find out heat temp vs intensity of radiation, and differentiate which one is higher. Also need to be able to cut the quartz.
Consumer Products Safety Laboratory needed for Product Safety Testing of treadmill safety belt .
Canada consumer products safety laboratory needed for bedding testing for skin irritant chemicals.
Consumer Product Safety Laboratory needed for new soap formulation testing: Dermatological compatibility, primary and accumulated dermic irritation and sensitivity to demonstrate the absence of irritation (primary dermic irritation and accumulated dermic irritation) and allergy potential (accumulated sensitivity) of Baby soap bar.
United States consumer products safety laboratory needed for CPSIA Testing of connected handmade throw pillows for toddler to teens Age 2 and up
USA Consumer Products Laboratory needed for ANSI testing to test window covering products that have complied with the ANSI standard to criteria of no exposed operational pull cords.
Consumer Products Laboratory needed for Amazon.com Product Safety Testing of dry ingredient products containing bentonite, kaolin, green tea powder, colloidal oatmeal, activated charcoal and tea tree oil.
Needed Product Safety Report for Amazon in order to sell products. They have stated the following requirements:
"Product testing documentation for the products you manufacture and intend to sell (e.g., a report from an independent laboratory stating the ingredients in the product, or stating the safety of the product), or your registration with the US Food and Drug Administration."
UK University Researcher needs UK Consumer Products Laboratory needed for insect repellent testing: Arm in cage or any other appropriate method
Consumer Products Laboratory needed for effectiveness testing of an air freshener used in cars.
Consumer Products laboratory needed for consumer product testing of dietary and muscle building supplements and skin care line such as moisturizers and anti-wrinkle creams to ensure all the ingredients are labeled properly, etc.
Consumer Products Laboratory needed for deodorant product safety assessment testing to be Amazon compliant for all-natural deodorant to meet Amazon requirements: * FDA certification registration document * New Dietary Ingredient (NDI) notification document * Product testing document * Safety Assessment document
I will add more testing as we grow.
Midwest USA Microbiology Laboratory needed for anti-microbial testing of mesh fabric materials
California Laboratory needed for sunglass testing: Impact resistance test / drop ball test
USA Electrical Laboratory needed for ANSI Flashlight Testing: Test 6 LED Flashlights to ANSI FL1 standards, Flashlight Standards
Europe toxicology laboratory needed for new product testing of hand sanitizer with 1.5 % bio h2o2 and aloe vera. EN 1500 Hand disinfection according to the European Standard (hygienic handrub)- EN 13727 Chemical Disinfectants and Antiseptics- EN 13624 Chemical Disinfectants and Antiseptics- Certificate of analysis ? H2O2 trimetric method- Test No. 439: In Vitro Skin Irritation
Florida consumer products laboratory needed for new design evaluation of hairdryer for treatment of damage hair.
US FDA Certified food laboratory needed for food contact surface testing of aluminum foil: Tests for Aluminium house foil (11, 14, 18 microns)Migration Test, Microwaveable and Resistant at -18°C etc.for House Foil microbiological test
Toxicology Laboratory needed for FDA GLP certification testing of Electronic Cigarette for GLP certification for the E-liquid. We are looking for the test of GLP Standard to Inhalation Toxicity Assessment of GLP Standard.
USA, UK, Australia or Canada FDA GLP toxicology laboratory needed for Gas Inhalation Toxicity Test for the E-Liquid of GLP standard.
USA Consumer Products Laboratory needed for product safety testing to issue "product safety report" of nylon/spandex/and plastic product to gain approval to sell product on Amazon.com
Southern USA consumer products safety laboratory needed for certificate of analysis for hand and bath scrub products to sell on amazon and they require this certificate: 12 ounce jar of coconut hand & body scrubmade only of virgin coconut oil and atlantic sea salt and essential oils.
Washington or Oregon USA laboratory needed for Product Toxicology Testing of herbal cigarette that we need tested to show the absence of controlled and banned substances, specifically synthetic cannabinoids for 4 different types of herbal cigarettes. ,
Large corporation needs bioanalytical laboratory for whey protein testing for PDCAAS (Protein Digestibility Corrected Amino Acid Score).PDCAAS analysis in a whey protein.
FDA third party laboratory needed for food contact substances validation testing. Validation of FDA requirement for consumer products (coffee mugs)
Consumer Products laboratory for consumer panel testing for fragrance claims: different types of fragrances that each claim to achieve something, one promised increased productivity at work, the other at the gym and the last promises a calming feeling and more peaceful rest. We're looking to have validity testing on these claims. Also, these tests are of interest as well: i. Formulation Testing ii. Fragrance Identification Testing iii. Fragrance Isolation Testing iv. Labeling Claims Testing v. Labeling Verification Testing
Analytical Chemistry Laboratory needed for Determination of Lecithin Phopholipids by HPLC-LSD 2007 (modified) (LPLC: S6) AOCS Official Method Ja 7c-07
Analytical laboratory needed to Test finished product for Phospholipids levels in accordance with Label Claim of 85mg/2oz serving. PHOSPHOLIPIDS (HPLC) (PHOSPHATIDYLCHOLINE, PHOSPHATIDYLETHANOLAMINE, PHOSPHATIDYLINOSITOL, PHOSPHATIDYLSERINE)Method MP 0479 REV 2 2009.
Consumer Products Laboratory needed to test laundry detergents for use in industrial applications. More specifically, we have detergent technologies that we currently sell into consumer laundry applications, but would like to test their efficacy against uses in On-Premise Laundry (OPL) and Industrial Laundry.
USA CPSC Accredited Consumer Products Safety Laboratory needed for Toy Testing: children's plush toy tested for safety and compliance.
Large consumer products company needs India chemical laboratory for Petroleum jelly testing to determine the Percentage quantity of Paraffin wax and Microcrystalline wax.
Large consumer products corporation needs analytical chemistry laboratory for adsorbent testing to determine sorption/desorption isotherms of organic vapors (hexane, octane), gases (CO2, SO2) and water, as well as binary mixtures of the two. Interested in monolayer determination from BET theory as well as competitive adsorption data.
USA Consumer Products Safety Laboratory needed for product safety testing of baby pacifiers and baby toys (ideally ages 4 months and up) to be tested for safety and any other tests needed to be within all necessary standards/requirements.
Time frame is very flexible (sooner or later is okay)
Europe consumer products laboratory needed for ASTM product safety testing of Bunk Beds in wood particle Board Toddler Beds to ASTM F 1427-07 Bunk Beds ASTM F 1427-RED-07_06 Bunk Beds ASTM F 1821-13 Toddler Beds ASTM F 1821-13-RED Toddler Bed
Consumer Products Safety Laboratory needed for baby products testing to ASTM for designer who isdesigning a ring sling-style baby carrier which needs to conform to the safety standards in ASTM F2907-14b.how much will this cost?
Dental Pharmaceutical company needs Consumer Products Laboratory for clinical study: dental consumer products panel testing with 100 patients. Company in process of obtaining an ADA seal of approval for their oral mouth rinse for the purpose of managing oral malodor. In order to prepare the ADA package, I am seeking to engage someone to conduct a three-week crossover or parallel group design clinical study of the mouth rinse utilizing one appropriate placebo control. It would require 100 patients, 21-65 years of age, using product 2x day, 30 second rinse. Baseline testing by a qualified panel of judges would be conducted, and then once per week and one at end (4 measurements total) The scale is a 1-5 intensity scale.
USA FDA Consumer Products Safety Laboratory needed for FDA Testing of handle Coffee mug/ mug is black with graduated chrome sprayed bottom
Large COnsumer Products Manufacturer needs Asia analytical chemistry laboratory for Nitrosamine Testing in Triethanolamine to ISO Methods
Consumer Products Laboratory needed for CSPC toy testing: plush toy product tested for CSPC and CA65. What type of tests will be required? Also, what would the price be for the tests? The toy is manufactured in China and will be imported. Thank you for any help you can give me.
Japan or Korea product safety laboratory needed for make-up consumer products safety testing: allergy or skin irritation for make up
Toy distributor needs consumer products safety laboratory for toy product safety testing including phthalate testing there have been many reports of high levels of phthalates and other dangerous substances of competitor product which we suspect are not suitable for children use. those products dont have any safety mark or any other EU certificate.
Europe analytical chemistry laboratory needed for isinfectat testing. Packaging is a small plastic spray bottle of approx. 30-40ml. The liquid inside is water like and the ingredients are: 1. Aqua 2. Alcohol-Denat 3. Melia 4. Azadirachta Extract 5. Xanthan Gum The list of ingredients have been taken from the current product in market. The spray can be used to clean hands, face and/or be used as mouth wash. It is very much important that the quantities of the ingredients match much as possible. The services I am looking for are: 1. the formula to create exact same product 2. the product delivered incl. packaging (design layout will be provided) Kindly could you let me know if you would be able to help with his project and if you could advise of approx. costings and timeframe. This is quite time critical project.
Consumer Products Laboratory needed for Consumer Products Safety Testing: natural eyelash adhesive testing. We would like your labs to establish that the product is all natural and safe and that it will function as intended.
USA FDA GMP Consumer Products Laboratory needed for ASTM, FDA GMP Testing annd Proposition 65 Testing to test various porcelain tableware items. Mainly plates and bowls.
USA Environmental Laboratory needed for EPA Efficacy testing for mosquito repellent that meets EPA requirements.
REQUEST FOR QUOTE: Hong Kong based arts and crafts manufacturer needs consumer products safety laboratory for Labeling of the Hazardous Art Materials Act Regulation, LHAMA test of a watercolor paint used for craft. ****Please provide quote for conducting the request with response.
USA FDA Compliant laboratory needed for nicotine extraction from tobacco by products. The lab would need to provide Pharmaceutical grade nicotine with lab reports and analysis of purity on all batches. Lab must be located in the continental USA and registered/compliant with the FDA.
California consumer products laboratories needed for mouthwash testing. Color Additive Analysis for the presence of a particular color additive in a mouthwash.
North America analytical chemistry laboratory needed for wax testing: Deformulation testing of a liquid fluoropolymer wax. Qualitative and quantitative chemical composition and functional role of ingredients.
Los Angeles FDA GMP Laboratory needed for Impact Resistant Testing and Drop Ball Testing
NABL India Microbiology Laboratory needed for microbiology testing for microorganisms like faecal streptococci,staphlylococcus auraes,salmonella,shigella,vibrio cholarea,vibrio parahaemolyticus,legionella,coliforms,faecal coliforms,total coliforms,mpn tecnics,proteolytics,lipolytics bacteria,E coli pseudomonas aureogenosa,aerobic microbial count,yeast and mould sulphite reducing anaerobes
FDA cGMP Microbiology laboratory needed for Hand sanitizer efficacy testing against bacteria and virus protection and 99.99% kill against harmful bacteria.
Cosmetics consumer products laboratory needed for ethnic hair care formulation testing of 2 in 1 tingling shampoo & conditioner, hot grow hair & scalp treatment conditioner, anti-breakage strengthening cream, temple & nape grow balm, intensive spot serum hair & scalp treatment, damaged hair treatment mask
Consumer Products Laboratory needed for consumer products safety testing on children's safety cords used on roman shades
Consumer Products Laboratory needed for window treatment testing: Roman Shade system testing.
Analytical chemistry laboratory needed for cigarette filter testing to be analyzed for its contents (tar, chemicals, etc). Please advise on what service I should be seeking and how to set up the testing.
Microbiology Laboratory needed for hand sanitzer efficacy testing against influenza A virus (human) 1. Objective ? demonstrate 8 hr protection and 99.99% kill against influenza A virus (human) 2. Contact time ? 5 or 30 sec, 1H, 2H, 3H, 4H, 5H, 6H, 7H and 8H Would appreciate your soonest reply.
Chicago analytical chemistry laboratory needed for ASTM Testing flash point for a water based cleaning solution to ASTM D02 ? Closed Cup ?
Large manufacturer needs consumer products laboratory for efficacy testing of household cleaner against soils like soils, lime scale and grease
Automotive Consumer Products Laboratory needed for automotive cleaning sponge testing on automobiles. On the Car paint, windshields, headlights, metal that has a barrier of plastic particulates on one side of the sponge. We would like to test it on all areas of a car to see how it compares to other products that are scratch less.
India analytical chemistry laboratory needed for deformulation testing to deformulate the competitors product (sandalwood wood incense sticks)
Large consumer Products corporation needs India analytical chemistry laboratory for detergent testing. To dertermine sorption/desorption isotherms To determine equilibrium moisture content
Microbiology Laboratory needed for disinfection testing: Hard Surface Disinfection Studies
Consumer Products Laboratory needed for Stability Testing for Shelf-Life , Expiration Dating and Microbiology Testing of 24 Products. Blends of sunflower oil and essential oils, and blends of witch hazel, aloe, water, botanical extracts, and essential oils.
California Consumer Products Safety Laboratory needed for consumer products safety testing of Baby activity mat
Consumer Products Laboratory needed for jewelry testing to comply with California's Proposition 65. Researching pricing at this time.
Canada, India or US microbiology laboratory needed for ASTM / AOAC Testing to determine Virucidal efficacy of new formulated disinfectant in Towellette/Swipes
USA Consumer products laboratory needed for fragrance testing: 5 items tested for the percentage breakouts of the actual Fragrance ingredients listed on the cans or bottles.
Consumer Products Microbiology Laboratory needed for antibacterial efficacy study for shower cream product to substantiate claim on "24 hrs 99.9% germ protection"? Is it based on in-vivo method?
Safety Cover Manufacturer needs materials laboratory for ASTM Testing of Safety Mesh Pool Cover for Certificationto ASTM F-1346-91 What is the process, costs involved Thank you
CE Mark Certification laboratories needed for that can provide the testing for sanitary ware according to CE standard? The products we want to test are as follow; ? Stop valve ? Automatic toilet flush valve ? LED mixer faucet ? Multi-purpose hand rail ? Hand rail for toilet ? Flexible hose ? Plug waste ? P-Trap
FDA GMP Consumer Products laboratory needed fro drop ball testig for FDA as soon as possible
Consumer Products analytical chemistry laboratory needed for deodorant formulation. Formulation of aluminium chroride antiperspirant/ deodrant like drysol or perspirex, please if you can help in this project especially in the formulation and testing part of it.
Analytical Chemistry Laboratory needed for botanical insecticide testing for chemical traces to be checked in the neem based botanical insecticide. 1.NICOTINE. 2.BI- PHENYL. 3. ANTHRAQUINON. 4. PYRR0LIZIDINE ALKALOIDS Please send us the details of the lab who can take up the above analysis in India. Also send us the quote for testing.
Analytical Chemistry Laboratory needed for disinfectant testing to declare a disinfectant free of dioxins.
Consumer Products Laboratory needed for ASTM testing: packaging testing to ASTM 6954: Biodegraability testing of plastic packaging to check whether the packaging is oxo-biodegradable
URGENT California FDA Laboratory needed for FDA testing of FDA detained product 200 samples
BBQ grill maufacturer, one Charcoal BBQ Grill (Kettle model) needs laboratory for testing another portable Gas BBQ grill, both for outdoor use. Then we would like to know if your lab can make some tests for us, which tests, what are the prices and how many samples do you need? Your reply is highly appreciated. Thanks and Best regards,
US microbiology laboratory needed for biodegradability testing of our consumer products bathroom spray made of essential oils
Inndia Consumer Products Laboratory needed for efficacy esting of mosquito repellent cream
CANADA consumer products laboratory needed for consumer products safety testing Testing baby bibs, need a report for flamabilty testing as per health canada
United Stated CSPA recognized laboratory needed for C CSPA DCC-16, CSPA Individual Test Methods, Guidelines for Evaluating the Efficacy of Bathroom Cleaners- Scrubber Test for Measuring the Removal of Lime Soap. Must be CSPA Consumer Specialty Products Association recognized laboratory.
South America TOxicology Laboratory needed for Toxicity testing: Acute Inhalation Toxicity:
equipment ad materials
Consumer products laboratory needed for performance evaluation / chemical analysis on permanent marker inks. Our goal is to determine is we can distinguish the ink composition between two different brands in order to assess the impact as follows: - which brand ink will dry first - what brand will cause blotting on 80gsm paper - which brand will cause smudges when rubbed on a plastic sheet We would also like to know how much it will cause and we're willing to ship the sample marking pens. Let us know how many quantities will be required in order to conduct the test.
Multinational Consumer Products Manufacturer requires Contract Chemistry Lab for Linear alkylbenzene analysis. 3 samples of LAB, Linear alkylbenzene Need method BS EN 13405
Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography ( HPLC)
Consumer Products Laboratory needed for consumer products panel study testing for anti-aging serum for face and eyes. We did some testing for it, but we want to do a new test study
Consumer Products Microbiology Laboratory needed for anti-fungal microbiology testing: non-clinical studies for 3 anti-fungal projects, including time and cost evaluations. These studies will need to include candidate treatment screening, MIC determination, and synergy studies with preexisting drug treatments. Microbes include Trichophyton rubrum, Malasezzia globosa, and Candida albicans. If possible, I will need a response before 11am ET. Thank you.
HEALTH CANADA CONSUMER PRODUCTS LABORATORY NEEDED FOR CONSUMER PRODUCTS SAFETY TESTING - KIDS WEAR- ZIPPER METAL PART TESTING TO Nickel EU Directive 94/27/EEC, Optic and spectacle regulation: Nickel regulations on frames
Materials Laboratory needed for optical testing: Optical transmission @ 185 nm of samples of fused quartz tubing.
Consumer Products Laboratory needed for ASTM Testing of Hot tub Covers tested to meet Testing to ASTM F1346-91, Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
US Consumer Products Laboratory needed for Consumer Products Testing: Cumulative Irritation Test, Repeated Insult Patch Test for All Natural Laundry Soap - no specialized handling or shipping required. Simple group testing method needed for irritation to human skin.
Large Multinational Consumer Products Laboratory needs contract microbiology laboratories around the globe able to provide total aerobic plate count, gram staining and speceis level identification.
Asia consumer products laboratory needed for luggage testing to material Def Stan 81-41 / Stanag 4280 IP67, ATA300, Stanag4280: Luggage / Casing
Consumer Products OECD Laboratory needed for OECD Testing: degrability index of candelilla wax
Consumer Products Materials Laboratory needed for ASTM Testing to ASTM E2187-04, Standard Test Method fro Measuring the Ignintion Strength of Cigarettes.
Large Consumer Products Mfg needs analytical chemistry laboratory for ISO Testing. Capable of runnign ISO 3704-SULFUR FOR INDUSTRIAL USE - DETERMINATION OF ACIDITY - TITRIMETRIC METHOD
Consumer Products Laboratory needed for Consumer Product Safety Testing for a household/hardware (doorstop) item. Will provide 2-3 samples. Will ship.
Enviromental Microbiology Laboratory needed for biodegradability testing of laundry detergents for biodegradability and presence of phosphates under eu regulation 648/2004 and detergent regulation 259/2012. Thank you Regards Alan Brennan
India consumer products laboratory needed for BIS Certification Testing To test UV water purifier unit as per IS 14724 & 10910 for all Physical, Chemical & Microbiological parameters for ISI certification. online UV based Water Purifier under the brand Name Watershield Versatile. Watershield Versatile is 4 stage purifier: 1st Stage Compact, Antibacterial, Sediment Removal Cartridge for removal of dirt, mud and dust. 2nd Stage Organic Matter Reduction, Free Chlorine Reduction and Protozoa Cyst Removal Silver Impregnated Granular Activated Carbon filter. 3rd Stage Specialized Cartridge for removal of undesirable salts of Iron, Arsenic Mercury, Manganese, metallic impurities and pesticides. 4th Stage Ultra Violet Chamber: 4 pin UV Sterilizer made of SS 304L with 8.0 w/16w UV Lamp: - Contains Ultra violet lamp which
Consumer Products Laboratory needed for NF Certification Testing: toilet testing for nf certification for france
E-liquids for e-cigarette producer needs US analytical chemistry laboratory for contamination testing such as TSNAs, PAHs, Diacetyl, Acetyl Propionyl, Acetoin, Sugar, Gluten, and GMOs. I would also like to know the nicotine concentration. Is that something you are capable of doing, and if so what would the cost of these tests be? My samples are in liquid form in a propylene glycol and vegetable glycerin base. I would submit seven samples at first and if the testing is at a price I can maintain, I would like to submit samples on a regular frequency.
Consumer Products Analytical Chemistry Laboratory needed for flouride testing of powder fluoride sample: OPTICAL & percentage elemental (ASSAY)analysis of fluoride samples. If it is possible then please let me know.
Consumer Product Laboratory needed for consumer products safety testing of car seat protector product. Car Seat protector slides under the car seat and attaches to the front seat.
Analytical chemistry laboratory needed for staibility testing: shelf life stability testing
Florida consumer products laboratory needed for carcinogen testing of fabric bed: headboard and bedframe for carcinogens (TDCPP)
Toronto importer needs Consumer Products Laboratory for diaper testing for safety chemical composition, etc.
Canada or US ISO Laboratory needed. ISO/IEC 17025:2005 accredited analytical chemistry laboratory needd for VOC testing in consumer products by CARB method 310.
test some of our products such as dishwashing liquid, shampoo and industrial cleaner and Consumer Products Laboratory needed for efficacy testing, microbiology testing and physical testing of degreaser for cleaning efficacy, physical properties such as pH, viscosity, etc., microbiology and stability.
Mechanical Laboratory needed for DIN testing for Shore A Hardness Testing to DIN 53505, Testing of rubber - Shore A and Shore D hardness test
Microbiology Laboratory needed for microbiology testing: environmental conditions and test procedures for airbone equipment-section 13 : Fungus Resistannce to RTCA-DO 160 G, Environmental Conditions and Test Procedures for Airborne Equipment
Consumer Products analytical chemistry laboratory needed for chemical testing of Surfactants; structured liquid verification using polarized light microscopy and high resolution color images. Need good images for technical bulletins.
Consumer Products Safety Laboratory needed for Consumer Products Safety Testing: solid vegetative soap testing to European directive 1223/2009. According to the regulation, we have to prepare a cosmetic product safety report for the soap. Required information for our safety assesment report are as follows: -Physical/chemical characteristics and stability of the cosmetic product -Microbiological quality -Impurities, traces, information about the packaging material -Exposure to the cosmetic product -Exposure to the substances -Toxicological profile of the substances -Undesirable effects and serious undesirable effects -Information on the cosmetic product We request quote for the tests. Please kindly inform us whether you may perform the tests or not as soon as possible.
South Africa microbiology laboratory needed for biodegradibility testing of wet wipes
Looking for supplier to conduct and certify USA Product Safety Laboratory needed for ANSI Testing of safety lenses for the ANSI Z87.1-2010 American National Standard for Occupational and Educational Eye and Face Protection Devices.
Southern California physical laboratory needed for sound transmission loss and absorption testing
Preferably Mumbai Consumer Products Laboratory needed for Mosquito Repellant Testing. Testing of mosquito repellant developed from Deshi cow urine,lemon grass,neem,termeric.
Consumer Products Laboratory needed for ASTM Testing of moldable clay that needs to be tested to conform to ASTM - D4236, Standard Practice for Labeling Art Materials for Chronic Health Hazards
Mexico Mechanical Laboratory needed for ASME Testing: Charpy Impact Test required per ASME Sect. VIII
Microbiology Laboratory needed for USP Microbiology Testing to USP 62, Microbiological Examination of Nonsterile Products - Microbial Enumeration Testing Labs and Tests for Specified Organisms, if so please send a quote containing the following: test swab, culture tube, documentation, packaging and all lab fees.
USA consumer products laboratory needed for olfactory comparison study testing of Air Fresheners fragrances
Large consumer products manufacturer needs India Third party laboratory who can provide lyophilization support testing of it's lyophilization process.
Large consumer products laboratory needs analytical chemistry laboratory for Surfactant/Granular Detergent Analytical Testing
EPA accredited laboratory needed for formulation testing of a cleaning/sanitizing product for home/consumer use. Can you please let me know of potential labs that can help me with this?
Northeast USA consumer products laboratory needed for GSA Testing. Bunk Bed testing of high loft bunk bed to requirements of 3FNE-582D for GSA
Analytical Chemistry Laboratory needed for organic tin testing in Consumer Products.
India Analytical Chemistry Laboratory needed for chemical analysis testing in cloths and water
Consumer Products Laboratory needed for cosmetics testing of 13 products: toxicology testing, microbiology testing and stability testing. The 13 products consist of bubble bath, shower gel, moisture lotion, shampoo, conditioner, hand wash and lip balm pre made bases blended with essential oils
Analytical consumer products laboratory needed for inorganic and organic materials testing of facial mud. need to see what inorganic or organic material?
Large consumer products corporation needs FDA GMP pharmaceutical analytical chemistry laboratory for USP Testing to USP 788, Particulate Matter, Injections. number of samples is probably small.
Consumer Products analytical chemistry laboratory needed for tea light testing: 3-4 off tea lights that we require tested for VOC and PAH. Do you have the equipment for these tests? Price per candle.
Materials Laboratory needed for materials ASTM Testing to ASTM 695/ ASTM 638/ASTM 648/ASTM D570/ASTM D149 on HDPE sub-flooring channel or track that sits between flooring and joist. The parameters we require tested include: compressive strength, tensile strength, thermal resistance, water absorption, electrical properties, fire properties, acoustic properties, accelerated UV degradation testing, durability. Is your organisation able to assist us?
Consumer Products Laboratory needed for cosmetics consumer products testing: wearbility testing of nail polish after it has been applied?
Mechanical certification laboratory needed for steel testing of elevator ropes fpr 6mm Steel Ropes from Drako in germany to be used in our CE marked product
Australia electrical laboratory needed for optical testing of VMS sign design to comply with AS4852 the testing is detailed in the standard it is basically intensity and colour measurements.
Mechanical Laboratory needed for mechanical testing of Zero turn lawn mowers. 2 different mowers; 1 sample each. 1 mower 54" deck, 1 mower 60" deck. Test description: ANSI/OPEI B71.1-2012: 23.3.2 Impact Test; 23.3.5 Structural Integrity Test (w/ and w/o grass catcher); 23.3.7 Thrown Object Test
Consumer Products Toxicology Laboratory needed for toxicology testing of New birthday candle line needing test for toxins/metals.
Analytical Chemistry and Microbiology Laboratory needed for VOC Testing and Microbiology Testing for bacteria function for air cleaner.
Europe Analytical Chemistry Laboratory needed for nicotine testing: content of nicotine in e-liquids (for e-cigarettes)perform the tests in temperature above 20 degrees (or in which conditions tests are done and in which conditions the range of mistake will be the smallest)
Korea skincare company products needs consumer products safety laboratory for consumer safety testing and skincare efficacy tests, finished product tests, functional tests to substantiate our product functions.
Consumer Products Laboratory needed for consumer products Testing of Herbal Incense product to confirm no state or federally banned substances are in product prior to maketing.
US Consumer Products Analytical Chemistry laboratory needed for consumer safety testing: GC/FID and GS/MS to certify our nicotine solution eLiquid is safe for vaporization and human consumption.
India Consumer Products Laboratory needed for consumer products testing. Our requirement is to test the liquid fabric whitener which is used for whiteness of white clothes and paint whitener or stainers which is used for whiten the white paints.
Consumer Products Laboratory needed for comparison study testing: competitors study on bee venom cosmetics products
USA Consumer Products Safety Laboratory needed fr safety testing. Testing of Herbal Incense Product for banned substances.
New York City consumer products Laboratory needed for children's wear testing required for children's wear
United Stated FDA Approved GMP analytical chemistry laboratory needed to manufacture/produce e-liquid for electronic cigarettes.
USA consumer products safety certification laboratory needed for certification testing to certify wood pallet mulch(soft and hardwood) for use as playground mulch. I need to know what the criteria is. I will only supply the mulch and therefore would not be required to abide by any rule as to how thick it must be laid down etc. I just need to know what is required to certify and where do I go to do it.
India analytical chemistry laboratory needed for cerium oxide testing to verify the percentage of cerium oxide compound, not the metal, but the glass polishing compound.
Asia consumer products laboratory needed for baby products testing: baby disposable nappy analysis and sanitary napkins testing.
Asia Analytical Chemistry and Microbiology Laboratory needed for formulation and stability testing of industrial, household and personal care products, for example industrial cleaner and degreaser, descaler, bathroom cleaner, oven cleaner, dish washing liquid, liquid hand soap, shower gel, shampoo, etc. We would like to test these formulations for stability, shelf life (microbiological testing), performance and other required tests.
Consumer Products Analytical Chemistry Laboratory needed for chemical testing: deformulation (i.e., chemical analysis or reverse engineering) of two consumer products. The first is a natural wood treatment and the second is a drain cleaner. We believe the formulations are fairly basic, but can send samples upon request.
South California Toxicology Laboratory needed for toxicity testing for lead, cadmium, for a colorful hand-painted reading glass with matching hand painted hard cases, all manufactured in China on their face, handles it and the case, could be exposed to higher amounts of these types of metals, etc. This would be a one-time test event with a representative sample of the product.
Packaging Laboratory needed for Consumer Products Testing: chemical child-resistant packaging testing for leakage, impact & drop testing) Please see specific requirements for all. 1) Child-resistant testing of our bottles. 2) Leakage testing. 3) Impact testing. 4) Drop testing.
USA consumer products laboratory needed for incense testing of herbal incenses to determine what synthetics are contained and what are not. and updated legal information for the individual states if possible.
USA consumer products laboratory needed for compliance testing of aromatherapy product. Need a "not detected" panel for aromatherapy product to prove compliance with louisiana law by showing the product contains no banned substances.
USA Consumer Products Laboratory needed for consumer products testing of silicone bands for BPA, as well as lead in the printing on the bands to see if it is child safe and BPA free
India Microbiology Laboratory needed for disinfectant Testing for disinfectant efficacy testing for MRSA, E-COLI, STAPPHYLOCOCUS AUREUS, etc.
Asia or USA Toy consumer products laboratory needed for toy teating: Physical & mechnical test,Flammability test (ISO8124 's test method) and Toxic element-general and toluene testing per Chile 's requirement.
Los Angeles consumer products toy laboratory needed for toy safety testing :paint safety test
Midwest ENvironmental Microbiology Laboratory needed for environmental swab testing for non-sterile product manufacturing facility
USA Food Product Safety Laboratory needed for food product safety testing: Lead and cadmium extracted for ceramic foodware, ceramic container
Consumer Products Anaytical Chemistry Laboratory needed for deformulation testing of a candle wick wax. All we know about the wax is that it is of vegetable origin and the melt point range. Would you be able to carry out this kind of analysis?
India Clinical Laboratory needed for clinical study testing: invivo study (including microbiological processing) to evaluate antibacterial efficacy of soaps & hand washes.
Consumer Products Laboratory needed for taste and dissolution studies on medications.
Dallas/Fort Worth Consumer Products CPSC Laboratory needed for Consumer Product Safety Improvement Act of 2008 CPSIA 2008 testing.
Canada analytical chemistry laboratory needed for formulation testing of e-liquid for e=cigarettes formulated and tested
USA Consumer Products Laboratory needed for Consumer Product Safety Commission CPSC Toy Testing: prototype testing plush toy/stuffed animal, potentially for use by children of any age.
NJ Consumer Products Laboratory needed for consumer poducts certifcation testing that Synthetic Cannibniods and prohibited substances natural herbal smoking blend for retail distribution. Need certification that it contains no illegal substances.
USA Analytical Chemistry laboratory needed for analytical chemistry testing of Floral Additives Aqueous sugar solutions, deformulation testing, sugar quantification, additive identification / quantification(possibly aluminum sulfate, biocide agents, and citric acid)
Colorado analytical chemistry laboratory needed for cleaning product testing: Analyze ingredients of product and effect on various surfaces
South Africa OECD Microbiology laboratory needed for microbiology testing: Ames testing with at least four bacteria strains according to OECD protocol No. 471 proving non-mutagenicity on solvent and UV based Digital printing Ink
India consumer products laboratory needed for chemical product safety testing and chemical effectiveness testing of chemical used for the Product but need to do some research for the same like how much its effective while using in live scenario, what modification is beneficial for company, how will improve it more.
For more clarification please contact on below number.
US Consumer Products Laboratory needed for comparison testing of cut resistant gloves
Europe Microbiology Laboratory needed for antimicrobial testing of Essential Oil mix
France consumer products laboratory needed for baby product consumer product safety testing
Canada accredited Canadian laboratory (accredited only, please) needed for accuracy testing and purity testing. for the purpose of regularly conducting accuracy & purity tests on our consumer chemical products.
USA Consumer Products Laboratory needed for Softness testing of nonvowens fabrics and laminates used in the hygiene industry (diapers)
California Consumer Products Safety Laboratory needed for consumerproduct safety testing. Tested Required for 18" Oscillating Fan 1. Polarized Plug 2. Lack of Grounding 3. Degrading of Wire Insulation during testing 4. Absence of adequate Thermal Protection 5. Use of plastic Enclosure that did no Self-Extiguish 6. Undersized Power Cord estimated at 24AWG.
India consumer products laboratory needed for efficacy testing of mosquito repellent cream
India tetiles laboratory needed for towel testing: whiteness of the towel, strength, yarn count etc.
Eastern USA consumer products laoratory needed for Soap Testing. ASTM Testing to ASTM D460 Moisture, Free Alkali, NaCl and Titer of Soap Base
USA FDA GMP Consumer Products Laoratory needed for FDA impact testing for the import of sunglasses
USA Consumer Products laboratory needed for ASTM Testing: Temperature rating on 6-7 jackets
Consumer Products Laboratory needed for Match Performance Testing to BS EN 1783:1997, Matches. Performance requirements, safety and classification
Texas Consumer Products Laboratory needed for MP Consumer Panel Testing: 21 samples, Want the odor panel participants to evaluate the effectiveness of odor elimination of different cat litters.
Consumer Products Laboratory needed for Consumer Product Safety Testing: (Microfiber lunch box) we offer is compliant with California Prop 65 and also FDA?s guidelines for food safety. The tests that I need performed for the California Prop are 5 heavy metals (Lead, Cadmium, Chromium, Mercury, and Arsenic) and also 7 Phthalates (DnBP, BBP, DEHP, DnOP, DINP, DIDP and DnHP). As far as the FDA?s guidelines for food safety, I need assistance to determine the appropriate tests to be confident that I am selling a safe product. Does this sound like something you can help out with? Thanks! email: phonenumber: address:
USA or Canada consumer products laboratory needed for diaper testing. AATCC tests preformed per business every 3 months to pH: AATCC 81ABSORBENCY: AATCC 79SANITARY: MCD 1.00778. We have about 15 businesses that will need to send 1 to 3 samples to be testing using the below three (3) methods.
USA analytical chemistry laboratory needed for GCMS testing of essential oils and physical testing (refractive index, specific gravity and optical rotation). What are your fees for these services?
USA Consumer Products Laboratory needed for FDA Testing and California Proposition 65 testing to ensure Microfiber lunch box is compliant with California Prop 65 and also FDA's guidelines for food safety. The tests that I need performed for the California Prop are 5 heavy metals (Lead, Cadmium, Chromium, Mercury, and Arsenic) and also 7 Phthalates (DnBP, BBP, DEHP, DnOP, DINP, DIDP and DnHP).
As far as the FDA's guidelines for food safety, I need assistance to determine the appropriate tests to be confident that I am selling a safe product.
Consumer Products laboratory needed for analytical chemistry testing of several soaps to see the exact composition of each sample. I will have ~10 samples. Could you please give me an estimate on how much this would cost, and what physical quantity you need to perform such a test?
USA Consumer Products Laboratory ANSI B175.3 Section 7, Outdoor Power Equipment - Grass Trimmers and. Brushcutters - Safety Requirements
Canada analytical chemistry laboratory needed GC-MS / Analytical Chemistry. for Analysis of consumer product for nicotine by isotope-dilution gas chromatography-mass spectrometry; analysis for other compounds and contaminants by gas chromatography-mass spectrometry; leak resistance test as detailed in Schedule 3 of the Consumer Chemicals and Containers Regulations, 2001.
Consumer Products Laboratory needed for ASTM temperature rating testing for apparel (jackets) 6-7 samples.
Consumer Products Laboratory needed for chemical exposure testing for Exposure Level of chemicals£¨TRIS TDCPP) of mattresses
Canada Consumer Products Laboratory needed for Consumer Products CPSC testing on a cloth diaper according to CPSC guidelines
Large electronics firm needs electrical laboratory for electrical product safety testing 1.Need you support to Know Which are the Labs do have facility for LCD /LED product safety testing as per IS616: 2010. 2. Time period for testing & issuing certificate 3. Testing charges??.
Materials Laboratory needed for coating testing for coating thickness (DFT) on stainless product and what is the cost and lead time.
USA Consumer Products and Toxicology Laboratory needed for toxicity testing of electronic appliance appears to be producing toxic odorless fumes. These need to be identified and measured. The appliance can be mailed to the lab.
Materials Laboratory needed for acoustics testing for covers and accessories for iPad, Kindle, Nook, and many other tablets and e-readers: perform a series of tests with this product to try and quantify how much sound quality and volume is improved when using our case (as opposed to other cases or no case at all). Of course, we would provide you with all of the necessary components to be used for testing. We are hoping to use this information both internally and in marketing our product, promoting the new technology.
India Surface cleaning liquid manufacturer which acts as disinfectant, deodorizer, insect repellent needs consumer producs laboratory for cleaning properties testing, disinfectant testing, toxicological studies, safety testing, allergic studies - (eyes, skin, oral), food grade, environmental testing, deodorizer testing, insect repellent and consumer products safety in the Indian and International standards.
USA EPA GLP Microbiology Laboratory needed for EPA Microbiology testing of cleaning agent EPA classified as a 'pesticide' for it's efficacy in killing: ECOLI, HIV, ROTA VIRUS, etc. Laboratory testing. We have a European testing model already established.
UK consumer products laboratory needed for hygienic testing of 10piece nappy. 01piece pillow. 01piece towel.
Microbiology Laboratory needed for Flushability testing focusing on Edana Methods of Aerobic Biodegradation (WSP 513.2 or ISO 14852) or Anaerobic Biodegradation test (WSP 514.2 or ISO 11734)
India FDA GLP Laboratory needed for GLP Photostabilty Testing of sunscreen active substance
Consumer Products Safety Laboratory needed for Consumer Product Safety CPSC Testing of toy jewellery