Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Computers and Electronics Laboratories to perform their Computers and Electronics Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Computers and Electronics laboratory that would like more information on these Computers and Electronics projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Destructive Laboratory required for JEDEC Standard Solder Ball Shear/Wire Bond Shear Test
EN-50131-1 Electrical Laboratory needed that is authorized and capable of performing CENELEC testing, and granting certification in the fiels of EMC, Wireless emmisions, Safety, Immunity & telephonia. Our products are Alarm Systems, wireless & wired, low powerand we need to pass EN-50131-1 Alarm Systems-Intrusion Systems and other relevantstandards for our products.
Electrical Laboratory needed for Electrical Resistance Measurement - Measure resistance and leakage current of dielectric under 100 V bias.
EASTERN USA Electrical Laboratory needed for Standard UL 1030 Dielectric Voltage - Withstand Test & Thermal Endurance Test.
Brazil Acoustics Laboratory required for Random Vibration Test: SPEC 18-2155 - item 11.1.1 / 9.1 / 11.2 - All IVECO Fluid: 18-1825-A000 / Tutsol 4000 Drawing of the Meter 011391 I weigh of the equipment + he/she asks + fluid approximately 70Kg
USA Electrical Laboratory needed for thermally situmulated discharge current - this test is for investigating electrostatic charging properties of dielectric materials.
Los Angeles Electrical Laboratory needed for EMI Testing, Temperature, Humidity, Vibration, Lighting Strike.
Electrical Laboratory needed for IEC Testing of 400ATP Feeder Pillar Panel BoardShort Circuit Test 46KV for 0.3Sec.
USA Physical Laboratory needed for IEC 60332 Fire retardant testing of different cable: 1.5mm²xsingle core stranded /flexible FR cable, 5mm²xsingle core stranded /flexible FR cable, 1.5mm²x2 core stranded /flexible FR cable
4) 2.5mm²x 2 core stranded /flexible FR cable
Utan and Idaho Electrical Laboratory needed for FCC Class A EMC Field/In-SituField testing of large outdoor electronic units
Nevafa Electrical Laboratory needed for electrical certification testing of Electrical devices LCD/LED backlit panel with cooling system. Need certification to use for public displays. UL requires too much time.
India Electronics Certification Laboratory needed for DGS&D testing of CCTV cameras, Hand Held Metal Detector, vibration sensors based alarm system, perimeter fencing protection
Analytical Chemistry Laboratory needed for Premanufacture Notice Testing: Dissociation constant, Particle size, Octanol / water partition, Henry's Law constant v. Volatilization from water vi. Volatilization from soil vii. Flammability viii. Explodability ix. Adsorption / coefficient x. Density xi. Vapor pressure If so, could I get a quote? Sample matrix is solid (powder).
Supplier of electronic cigarette eLiquid needs FDA GMP analytical chemistry laboratory for product safety testing of ingredients. We need full analysis of our liquid with emphasis on safety for human consumption and ingredients. Basically the standard testing for retail consumable products.
USA Materials Laboratory needed for ISO and DIN Testing: ISO 178; DIN 53453; ISO 527; ISO 604; VDE 030/1; IEC 216; IEC 707; ISO 62;
US Electronics Company needs chemical resistance testing of three materials to to I2, iodine.
India Lighting Manufacturer needs electrical laboratory for BIS radiofrequency disturbances test
Florida Electrical Laboratory needed for electrical Testing including coordination study /arc all gear in place. Use the information we provide to produce a coordination study/Arc flash analysis......... ASAP
Laboratory Incubator Manufacturer needs UKAS physical laboratory for testing temperature of a reagent incubators, one to hold a temperature of 15c +/- 0.5c and the other to hold the temperature of 5.5c +/- 1.0c.
Any Location SAE AS81044 close 126.96.36.199 Electrical Laboratory required for testing; Ageing in an oven (velocity of air 100-200Feet p minute), 200°C/7 days + band test + AC test 2,5kV/5min.
USA Electrical Laboratory required for testing ribbon cables. Some data that we need is 1. Impedance of the ribbon cable 2. Shielding effectiveness
Singapore ASTM F2101-07 Microbiology Laboratory needed for Bacterial Filtration efficiency Test for Computer Manufacturing.
TN (USA) Electrical Testing Laboratory needed for dielectric strength and dielectric withstand testing on ceramic electrodes for use in our gas water heating products.
Korea Physcal Laboratory needed for MIL-STD-810F Explosive Atmosphere Testing (Environmental) This explosive atmosphere test is performed to demonstrate the ability of electronic device to operate in fuel-air explosive atmospheres without causing ignition.
Texas materials laboratory needed for developmental/characterization testing ofr sodium aluminum fluoride, fluorides, Water solubility, TDS, fluoride concentration, elemental analysis, speciation, ect, to be discussed.
USA Physical Laboratory needed for Test 2 headphones to the FAA flammability specification FAA test per Title 14, Part 25
US electronics testing needed for reliability testing on semiconductor using a Aetrium Model 1164.
USA Analytical Chemistry Laboratory needed to determine the resistivity of dichlorosilane sample.
Canada materials laboratory needed for EU REACH Testing for a list of all material in our products.
Florida electrical laboratory needed for testing electrical signs, neon signs and fluorescent signs.
Electical Laboratory needs TTI-390 testing against data sheet. Includes dielectric constant, dielectric loss tangent, etc.
USA MAterials Laboratory needed to test materials compatibility and/or degradation of new materials being developed for elctrochemical sensors, especially at temperatures ~150C. Materials are polymers, metals, aqueous and nonaqueous solutions.
ISO India Electrical Laboratory needed for laboratory ISO Testing for transformers,generators,surge arrester,motors.
Electrical Laboratory needed to determine the delay of a coaxial (RG214/U) line with two reverse male TNC connectors on the ends.
Europe Electrical Laboratory needed for IEC Testing to iec 60601-2-2 standard testing for return electrodes
USA Electrical Lab needed for SAE testing for high current circuit DC breakers according to SAE J1625 standard
USA ISO Analytical Chemistry Laboratory needed for testing aqueous solutions for part per billion by weight levels of Al, As, Ca, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Ni, Na, P, Si and Zn: 1% Nitric Acid; 35% Nitric Acid; 20% Hydrochloric Acid; 21% Hydrobromic Acid; 27% Ammonia solution; Saturated Chlorite solution.
California Electrical Lab needed for 1)Insertion Loss and Return Loss testing from 0 Hz to 3 GHz for COAX cable and connectors. 2) CAT5e conformance testing for a RJ45 jack to RJ45 jack small test box
US electrical lab needed for ANSI Pre Cert engineering evaluation testing of a Watthour Meter to ANSI C12.20 Test 17 (Effects of High Voltage Line Surges), 25 (Electrical Fast Transient/Burst Test), and 27 (RF Conducted and Radiated Emissions).
Electrical lab needed for evaluationof miniature cold cathode germicidal UV bulb in a small toothbrush sanitizer. Testing for UV leakage. We can send sample to any lab is the USA.
ELECTRICAL LAB NEEDED FOR PRODUCT SAFETY TESTING A LIGHTED CD RACKMADE OF 8mm ACRYLIC THAT HANGS IN THE WALL
Electrical laboratory needed to test 5500watt hot tub heaters that have failed causing fires and we would like to have them examined in a lab including x-rays.
Electronics Microbiology laboratory needed for MIL-STD-810F Fungus Resistance Test. Equipment shall not support Fungus growth. It should be resistent to direct or indirect fungus attack.
Electrical laboratory needed for electrical & electronics meter testing & calibration
Electrical laboratory needed for equipment to be tested in all services for the electrical field or power electronics field
Environmental laboratory needed for conductivity testing and TOC testing (5-10 ppb) water analysis
Physical laboratories (1-2) needed to test our RFID chips. These 2.45 GHz chips are only .4mm square are impervious to gamma ray sterilization. Hitachi will provide the RFID readers and chips at no charge.
Electrical laboratory needed for Testing cables of rated voltage 6Kv(Um=7.2kV) up to 30kV (Um=36 kV) and of rated voltage 30kV(Um=36 kV) UP TO 150kV(Um=170kv)(AC Dielectric withstand , PD TEST and metallic sheath test according to IEC , BS Standards IEC60502-2 , IEC 60840
Analytical Chemistry Laboratory for Pesticide chemical susceptibility testing of electronic box per DO-160
Mechanical laboratory needed for Voltage and watertightness test 3. Installation test at low temerature 4.Climatic ageing test 5.Corrosion test 6.Electric ageing test 7.
Electrical laboratory needed for electrical ageing test 2. Climatic ageing test 3. Corrosion test 4. Installation test at low tem
Electrical Laboratory needed for IEC or BS Electrical Short Circuit and Tensile Strength Testing: Cleat Type Impact Resistance Resistance to Electro Mechanical Force Temperature for Permanent Application Needle Flame Test Lateral Load Test Axial Movement Test SHORT CIRCUIT TEST
Electrical laboatory needed for IEC Testing for Dielectric Constant IEC 60250, Surface resistance IEC 60093, Dielectric strength (1 mm) IEC 60243, CTI IEC 60112, Arc resistance ASTM D495-61, Thermal Expansion VDE 0304/T,1, UL 94 V0 Flame testing
Physical laboratory needed for gamma or x-ray field testing to determine if their is damage to a new High Voltage cable.
Physical laboratory needed for Drop/Vibration/Shock testing on Desktop PC Chassis Unit with the Modem Card.
Electrical laboratory needed for CISPR EMI testing of electronic marine engine monitoring system.
Certified ISTA packaging laboratory needed for ISTA 3E testing of the unitized load of the same product.
Electrical laboratory needed for required testing on electrical single phase and three phase energy meters used for diamond industries & textile industries
Physical laboratory needed for UV radiation testing of the Phototherapy unit use 6 nos CFL lamps. Would like to carryout UV testing of the light output for a wave length of 180-400nm
Electronics laboratory needed for identification testing of contaminant in PC, methods and companies which can de-contaminate, and return Pure PC.
Electrical laboratory needed for testing industrial robot cover to Japanese Standards.
Electrical laboratory needed for NEMA electrical testing of electrical enclosure for dust and water intrusion to NEMA IP67
Electrical laboratory needed for AHJ Testing on Electrical footer bond buried and concrete poured prior to inspection. AHJ requires testing agency to certify compliance and continuity.
Electrical laboratory needed for IEC 61196-1-107 cable microphony (noise) test I need information right away on a lab that can do this.
Electrical laboratory needed for 11KV H.T. Switchyard Equipments precommissioning testing on site. Tests like CT,PT testing, transformer testing, H.T. cable testing etc.
Electrical Product Safety Laboratory needed ENEC European certification testing to EN 61058-1 Switches for appliances certification.
Electrical laboratory needed for IEEE High Current Capacitive Switching. Experimental testing of 15kV 200/400Amp 3phase Vacuum Contactor.
Electrical laboratory needed for IEC electical temperature rise test according to IEC 60439-2 for busbar trunking systems.
Electrical laboratory needed for ISO 16750-2 Electrical Loads Testing of timer/valve assembly tested to the ISO 16750-2 standard with some exceptions.
Electrical laboratory needed for ASTM testing: Dielectric Constant, Dissipation @ 1GHz and 10GHz,Dielectric Strength, Vol/Surface Resistivity.
High Voltage Testing Laboratory for testing electrical rubber gloves and other utility products tested. Can you put me on to a lab or better yet a listing of who I might contact email:
Electrical laboratory needed for ASTM testing of electrical line gloves and utility safety equipment
Electical laboratory needed for EMC Testing of Large UPS Systems Testing of immunity and emmissions of a 750kVA UPS system in a test bed in a facility in US/Canada
Electrical laboratory needed for ANSI C12.1 Testing on electronic submeters: Test Description 15 Insulation 16 Votage Interruption 17 Line Surges 26 RFI 27 RF Conducted & Radiated Emission 28 ESD
See http://www.ezmeter.com for product description. "
Electrical laboratory needed for new UL/CA approval testing of Electrical Conduit fitting to UL 514
Electrical Laboratory needed for Electrical Inspections Testing on control panels. Majority of the panels are 24 vDc. Will need inspections on approximately 100 panels per year usually with 7 to 10 days notice.
IEC Electrical Laboratory needed for UL/CSA Lightening Impulse withstand testing on a prototype starter for 15 KV utilization. Impulse level as per IEC for UL/CSA certification
Analytical Chemistry laboratory needed to test the electrical conductivity, permittivity, and thermal properties of a liquid similar to apple sauce or orange juice with pulp.
Physical laboratory needed for testing peak temperature measurements of surface mount electronic components at 7 locations once unit has stabilized. Unit is about size of a TAB key on typical decktop keyboard
Electrical laboratory needed for BS EN 61238-1:2003 testing of power cables connectors and lugs, mechanical and electrical tests
USA Engineering Lab needed for TOF-SIMS, ESCA, GC/MS, XRD and SEM/EDS to work on a 2mm square sensor. Need reply by Wed, June 13 for testing in July or August.
IEC electrical laboratory for testing the MCB,MCCB for our load centers and test the load centers complete according to IEC60898 and IEC60947-1 ,3 ...type tested assembles ,rated voltage is not exceed 1000v AC, frequency not exceed 1000Hz , or 1500v DC .
The test we need to do according to 60947 as following : 1-verification of temperature rise limits . 2-verification of dielectric properties 3-verification of short-circuit withstand strength 4-verification of continuity of the protective circuit 5-verification of clearance and creep age distances 6-verification of mechanical operation 7-verification of degree of protection
the test we need to do according to 60898 as following: 1-visual test for the breaker MCB,MCCB 2-electrical insulation resistance test 3- protection against the high voltage test 4-
Electrical laboratory needed for Jedec J-STD-002B solderability testing of electronic components. The testing is for QFN (7x7 mm MLF with exposed pad) type of component and it should be done according to Jedec J-STD-002B
Physical, electrical laboratory needed for testing LCD display panels for reflectance and sunlight readability.
ISO 17025 electrical laboratory needed for IEC60076 for testing oil filled transformers
Electrical laboratory needed for ASTM testing electrical static discharge (ESD) on closslinked, foamed plastic plaques using ASTM D 257 method.
Electrical laboratory needed for testing to RTCA/DO-160D para 16 & 17; Airbus ABD0100.1.8 for normal/abnormal voltage transients; voltage spikes (600 VDC); voltage interrupt; ripple voltage.
Manufacturer needs electrical laboratory for testing to ASTM D1000 insulation resistance by indirect electrolytic corrosion on thick tapes (0.035").
EIA/TIA -464 testing for Ring Generation and Ring Detection, Dial Pulse Receive & Transmit, E&M lead tolerances
Luminescent product ( such as glow safety sign, water base paint), tested to ASTM E2072-04, E2073-02 2.Active charcold. material use to make water filter.
Cadium testing to satisfy 76/769/EEG or 91/338/EEC for manufacturer of video games accessories