Contract Laboratory has received the following incoming Laboratory Test Requests which need to be fulfilled! These Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Independent, Third-Party Automotive and Motor Vehicles Laboratories to perform their Automotive and Motor Vehicles Testing, Analysis, Assays, Product Development, Scientific Research Experiments, Inspections, Certifications, and Engineering Projects. If you are a Automotive and Motor Vehicles laboratory that would like more information on these Automotive and Motor Vehicles projects, please visit Register Laboratories or call toll free 1-855-377-6821.
Automotive laboratory needed for ASTM Testing and testing to norm MS211-47 Type A2 (KIA/HIUNDAI): ASTM D792, Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement , density, relative density, specific gravity, D638 - 14 Standard Test Method for Tensile Properties of Plastics , modulus of elasticity, percent elongation, plastics, Poisson&rsquo,s Ratio, tensile properties ASTM D790, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials , flexural properties ASTM D256, Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics , impact resistance, Izod impact, notch sensitivity, notched . ASTM D648, Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise
Automotive mechanical laboratory needed for front suspension springs testing for test requirements for Corrosion Key Life Fatigue test (KLT), t.e. Heat Soak, Coating Flexibility, Gravelometer, Coating Flexibility, Wear Resistance, Cyclic Corrosion, Fatigue. In case you have necessary resources to carry out such tests, we kindly ask you to send a response in order we could start our dialogue.
Certified Materials Laboratory needed for coating testing of Three (3) mixed adhesive coating samples tested for the following: 1. Volatile Organic Compounds (VOC) content per ASTM D-3960, Section 8.2.4. (Determining Volatile Organic Content of Paints & Related Coatings) and/or SCAQMD Annex to ASTM D-3960) 2. Weight Fraction of non-volatiles (solids) per ASTM D-2369-81 (Volatile Content of Coatings). 3. Density of coating per ASTM D-1475 (Density of Paint, Varnishes, Lacquer, and Related Products).
USA Volkswaren approved automotive labs needed to test Al wheels for Cornering fatigue testing
AUtomotive Parts company needs Acoustics Laboratory in Saudi Arabia to perform sound testing of York centrifugal chiller
Asia automotive laboratory needed for wiring harness Crimping validation, etc., laboratory needed to conduct tests according to General Motors standards
Electrical Laboratory needed for testing of an electrothermic sensor according to the ECE R118 norm (fire protection)
AUtomotive parts company needs automotive laboratory for General Motors Testing to GMW14609 Corrosion, Simulated 3 g Occupant Load & Downward Strength Test.
Automotive Laboratory needed to conduct tests according to General Motors standards: GMW: 3205 - Odor , 3232-Flammability , 3235-Foggong , 3259-Mildew growth , 15634-Interior Emissions , 15063-Material Sepc.
Automotive company needs Flammability testing on automotive brake clean aerosol formula
USA Automotive laboratory needed for SAE and ASTM Testing: Compression Stress Relaxation Test SAE J2979 + Low Temp Brittleness ASTM D2137
Automotive Laboratory needed for SAE Testing of automotive senders (hall effect transducers) tested to SAE J1226, Electric Speedometer SpecificationOn Road and SAE J1399, Electric Tachometer Specification
Physical Laboratory needed for SAE testing: solar radiation test as per SAE J575-2010, Test for Motor Vehicle Lighting Devices and Components
ISO Accredited ISO/IEC 17025 Mechanical Laboratory needed for full testing of brake pads/liners as per GSO ECE 90? Please adviseon the testing charges, TAT, Sample requirements for testing and other details, if any. Also please advise whether your Laboratory is accredited by ISO/IEC 17025?
LONG-TERM Eastern Europe laboratory needed for long-term testing of injection, painting and chrome plating of plastic parts for automotive industry to automotive industry specifications.
URGENT Automotive Laboratory needed to Evaluate automotive products as per Toyota standard.These tests are Characteristics Test, Heat Resistance Test, Water Resistance test, Strength test...etc.Please specify if your laboratory has th facilities to conduct tests as per Toyota Engineering Std? Please let me know your feedback ASAP .
Contract Laboratory needed for experiment is evaluate the impact resistance of an Aluminum Knuckle Steer Arms at negative 40° C. 1. Mount Knuckle through hub mounting face so that the steer arms are facing down 2. Install ball stud into steer arms and torque to 100 N-m. 3. Chill knuckles to negative 40° C for impact 4. Position so that the impact load will strike at the center of ball stud ball. 5. Test 3 of each steer arm at the 2 impact loads provided below (Height and Mass selected should represent the provided load condition). 6. Acceptance criteria is no fracture
Total combination should reflect 12 knuckles each: Load 1: 7,500 lbf Load 2: 13,000 lbf
India Packaging Laboratory needed for Vapor Corrosion Inhibitor VCI BAG Testing
Automotive laboratory needed for validation testing of VW 50180 automotive waddingfor compliance to PV3015, PV3341, PV3900, PV3925, PV3942
ILAC Accreditated Laboratory needed for ece r 16-04 safety belt tests & test reports
USA automotive laboratory needed for SAE J2064 hose validation to test to to SAE J2064-2015 to do an initial validation of a new line of air conditioning hose and couplings in 5/16" 13/32" and 5/8". I will supply assemblies with whatever fittings are required by the lab.
Large transportation company needs physical laboratory for Thermal cycle testing for water charge air coolers with below test requirements. Requirements are the following: There are 3 stages of thermal cycle testing (TC). Stage 1, stage 2 and stage 3.
Stage 1 we will manage in house but we?d need assistance in performing stage 2 and stage 3.
Stage 2: 2 parts will be given and can be run together in TCrig if possible.
Coolant flow rate: a constant 858 LPH and 40C Hot cycle air temp = 180C Cold cycle air temp = 20C Air pressure is 3 bar_abs Air flow is a constant 1000kg/hr
Hot cycle last 54 seconds, cold cycle lasts 54 seconds. The temperature change between the cycles must be completed in 6 seconds.
The test will run to 20,000 cycles, or to failure.
Stage 3: 2 parts will be given and can be run together in TCrig
Electrical Laboratory needed to Perform ESD test on ATV fuel system to SAE Standard at SAE J1645
ISO 17025 Materials Laboratory needed for paint testing to VW Standard VW TL211 Table 2 section 1.3 Evaluation of effect paints in terms of differences in sparkling and graininess per VW 5019 & 1.4. Structure measurement system: wave-scan plus?
Testing laboratory able to perform: Resistance to frictions of pipes and protective sleeves of automotive fuel systems
Materials Laboratory needed for Constituent components testing of oil product generated from pyrolysis of scrap tires. Need to know all components and percentage by weight or volume.
USA mechanical laboratory needed for SAE Testing to test 10 air break tubes and 4 gladhands to see if they meet SAE Standards.SAE Standards: J844 (air break coils) and J318 (gladhands)
POLYMER LABORATORY NEEDED FOR SAE AND ASTM TESTING OF RUBBER MATS TO SAE J1400, Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies and ASTM2611
Mechanical Laboratory needed for Testing of automotive brake lines to FMVSS 106, primarily whip testing.
Germany / Europe preferred but not necessary mechanical laboratory needed for airbag testing: T-shock with humidity for airbag modules. Alternative a climatic chamber with temperature change speed of ca. 20K/min is also possible.
LONG-TERM TESTING Company performing regular road tests for automotive OEM needs Oil Laboratory for regular fuel analysis for ?Diesel? and ?Premium Gas? (1 liter sample). Furthermore we need oil analysis (50-100 milliliter sample, brand: Mobil1 0W-40 or 5W-30). Could you please provide a pricing quote for above requested service?
India mechanical Laboratory needed for brake vacuum tubes testing Temperature Resistance (High and Low)? Ozone Resistance? Burst Strength? Cold Temperature Impact? Life Cycle Test
UK Physical Laboratory needed for Fatique Testing to BMW Standard BMW PR 060 Dynamic Fatigue test
Physical laboratory needed for materials testing of lamination product for: Tensile & Elongation Tear Strength Surface Receptivity & Adhesion (WET & DRY) Ageing Low Temp. Flex Flex Cracking Porosity Oil Resistance Variation in Weight Weft Distortion Surface Blocking PU Weld Strength PU Hydrolysis Ozone Resistance UV Resistance
Document reference MSC70-23a1-6
USA Materials laboratory needed for automotive standards testing of 3 different film materials on an automotive standard (MS 373- 12). Gasoline Non-leaded gasoline or isooctane :Toluene = 1 : 1 (by volume) 1 hr Brake Fluid Shall conform to MS 517- 06 1 hr Engine Oil HMC GENUINE OIL 10W 30 or equivalent 1 hr Antifreeze HMC GENUINE LONG LIFE COOLANT or equivalent 1 hr Thinner Shall conform to 4.5 in LACQUER THINNER 10 min Wax Remover Kerosene (Shall conform to KS M 2613 - 78 KEROSENE) Brake Fluid Shall conform to MS 517- 06
USA laboratory needed for SAE Testing of Compressed air dryer to SAE specification J2384, desiccant Air Dryers used in vehicles with compressed air systems
Automotive Laboratory needed for General Motors Standard Testing as per GMW 3172_2008 Power Temperature Cycle test ( 9.4.3) Water Test (9.5.2) Mechanical Shock-collision ( 9.3.4) Thermal Shock/water splash (9.4.4) Water Freeze (9.5.4) GMW 3191_2007 Water Submersion test ( 4.29)
Mechanical Laboratory needed for SAE Impact Testing to SAE AS8039 7.2.1 Impact Shock
Automotive Laboratory needed for IEC Testing of dashboard Cluster as per IEC 60068-2-5, Method-B, as per JCB Test standard STD0140 issue-4.
ON-GOING: Automotive Laboratory needed for SAE Testing to SAE J2384 on Desiccant Air dryers used in vehicles. SAE J2384 is a test procedures for desiccant Air Dryers used in vehicles with compressed air systems per SAE J2383. We would like to get a third party testing conducted on these air dryers. Once the laboratory is approved by my company there will be several requests submitted for tests on our behalf on a regular basis.
Mechanical Laboratory needed to provide estimation for GMW-3155 automotive testing to General Motors Standards.
Automotive Laboratory needed for Ford alternator pulley decoupler test specification which describes the environmental and durability requirements for this component. I can forward if you think your company can do some or all of the sixteen tests.. If your company cannot do one or more of the remaining eleven tests, we would still be interested in having you quote the tests you can perform.
Mechanical Laboratory needed for product validation testing for an automotive accessory drive/alternator pulley system. I have the full product validation test description and would like to know if your company can perform all or some of the testing. Please contact me at your earliest convenience.
NABL India environmental laboratory needed for environmental Testing of Automotive components
USA ISO laboratory needed for ISO Particulate Cleanliness testing of electronic component to ISO16232-10 Road vehicles Cleanliness of components of fluid circuits
URGENT: Materials laboratory needed for adhesive testing to General Motors Standards: test an adhesive to GMW 16443 asap please and what the cost would be.
Mechanical Laboratory needed for gas tubing Testing under Code of Practice GU01""Approval of flexible gas tubing for Low Pressure Applications
Materials Laboratory needed for ANSI and FMVSS autoglass testing: U.S standard auto glazing testing in accordance with ANSI-Z26.1-1996 and FMVSS 205?
Mechanical Laboratory needed for DOT certification Testing. Need Brake Hoses certified for the U.S. DOT's FMVSS 106 Brake Hoses.
URGENT: Automotive Laboratory needed for SAE Testing of automotive sleeving samples to be tested to Standard SAE J2302. This is required as soon as possible. Further details can be provided as necessary.
Asia automotive laboratory needed for seat belt testing Test Product : Seatbelt Webbing (only webbing .) FMVSS 209? Page 26-27
a.Width b.Elongation c.Breaking Strength d.Resistance to light e.hex bar abrasion
University Research needs Asia analytical chemistry laboratory for coconut oil analysis and performance testing on coconut oil blends. Testing for engine Performance includes: Total Fuel Consumption, Torque, specific energy consumption, specific fuel consumption, brake thermal efficiency, cylinder peak pressure and smoke intensity. Testing for Emission includes: Carbon monoxide, Carbon Dioxide, Hydrocarbon, oxides of nitrogen and oxides of sulphure.
Canada and USA ISO or AALAC certification laboratory needed for testing and certification of automotive parts (e.g. AMECA or any other certification compliant with North America requirements
India Mecahnical Laboratory needed for engine performance testing by using biodiesel?
Consumer Products Laboratory needed for effectiveness testing of an air freshener used in cars.
South America or USA Mechanical Laboratory needed for Motor Vehnical Parts Testing to ISO and General Motors Standards: Bumper Product Validation tests Product validation, Polypropilene Validation general motors. Bumpers ISO 5011GM ProceduresGMW 15188, GMW , GMW 3059, GMW 15525, GMW 14528, GMW 16301, GMW 14889, GMW 14650, 14797, GMW 16456, GMW 15525, GMW 16301
SOuth America or US Mechanical Laboratory needed for ISO and General Motors Testing of Air filter ADV General Motors Validations to ISO 5011GM ProceduresGMW 14908, GMW 15324, GMW 3232, GMW 16671, GMW 16234, GMW 14226, GMW 3059, GMW 14264
Automotive Manufacturer needs Central Asia Automotive / Mechanical Laboratory for ASTM Testing and other testing:
ASTM D3012 or ISO 4577 - Oxidation Stability GMW3205 - Odor GMW3235 - Fogging GMW15634 - Volatile Organic Compound and Semi-Volatile Organic Compound GMW15635 - Carbonyls GMW16853 GMW14124 - Dimensional Stability/Dimensional Variation GMW3182 - Determination of Mass per Area (weight) ISO5084 - Thickness ISO178 - Flexural properties
Europe mechanical and physical laboratory needed for automotive parts testing: ball joints testing for stress resistance, dust seal, tests in environmental chamber.
Canada materials laboratory needed for reflectance testing to test mirror samples for reflectance before and after.
Physical Laboratories needed for Insulation Testing to SAEJ2302 - Thermal Effectiveness of Sleeve Insulation
USA Mechanical Laboratory needed for automotive parts testing: Ford Spec testing with tube and hose assemblies to ESDS7H-19b591-AA
India mechanical laboratory needed for JIS Vibration Testing for a section that is used in truck to evaluate for results in loss in mass.
Large automotive company needs laboratory for UL Testing: luminance test performed on a tritium self-luminous exit sign to determine if it meets the NFPA minimum luminance of 0.06 foot-lamberts.
Environmental simulation laboratory needed with Drive-in environmental chamber needed to test vehicles, -30 to +50C
Materials Laboratory needed for materials analysis of contaminants To identify composition and phases of contaminant particles on the surface of an exhaust system component
Manufacturer needs laboratory for automotive interior emissions testing to General Motors specifications to GMW16853 (overall interior emissions testing
Materials Laboratory needed for Rigid Polyisocyanurate (PIR) and Polyurethane (PUR) testing for building end-use applications. As a mandatory requirement our finished products must comply to the Saudi Standards, Metrology and Quality Organization base on adapted standard number - BS 4841-1:2006, BS4841-1-2:2006, BS4841-4:2006 & BSI4841-5:2006 Samples of test which we need are: Thermal conductivity and thermal resistance test Compressive strength Thermal strength normal to the major plane of the board Method for the determination of areas of unbounded facings Adhesive strength of bonded facings to the PIR or PUR slabs Other test as required by the mentioned standards
AASHTO certifications. Engineering firm needs validation testing of a camera mount that will be use to read car plates on a highway gantry.
Malaysia Mechanical laboratory needed for brake pad testing (SASO) on spare parts in Malaysia for e export to Saudi Arabia.
Europe Automotive Textile laboratory needed for automotive textile testing as per Renault / Toyota / Ford standards
USA Textiles Laboratory needed for ASTM Testing of 16 samples product is nonwoven textile material required testing is automotive interior material acoustical evaluation impedance and absorption of acoustical materials using a tube, two microphones, and digital frequency analysis system
Semiconductor company needs electrical laboratory for EMC testing scope as per automotive standards at your facility. 2. Please provide the process and other required details.
Canada mechanical laboratory to outsource part washing and testing for Ford program - est. annual volume is 850,000 pcs.
DEBRIS ON FINISHED PARTS SHALL BE REGULARLY MONITORED AND CONTROLLED USING STATISTICAL METHODS, ACCORDING TO ESBC3P-7W092-BA -CLASSIFICATION: HYDRAULIC COMPONENTS
NOTE# 10. MUST COMPLY WITH CLEANLINESS SPEC ESHL1P-7W092-AA -TABLE H (HYDRAULIC COMPONENTS) LINE #127 -TEST E PER ISO 16232-10 A(C-E15/F-G10/H-I4/J-K00)
Large Automotive Manufacturer needs USA Materials Laboratory for silicone material testing: 0.625" x 1.25" Rectangle Extrusion 30-40 Duro Black Silicone (or other colors as approved) Tolerances: RMA E2 "Precision" unless stated otherwise. Operating Temperature Range -40 deg C to 180 deg C
To ensure suitability for use in ATEX, IECEx, & CSA applications a Test Report showing the Relative Temperature Index (RTI) - UL 746 is required.
Need to confirm the Operating Temperature Range using the specifications below or other applicable testing as determined by the Lab.
Reference: Maximum continuous use temperature (ASTM D794). Brittleness Temperature for elastomers (ASTM D746 ISO 812 & 974) taken as the TR-10 (the temperature at which a sample retracts 10%, ASTM D 1329)
East Coast USA ASTM or ISTA certified Laboratory needed for Automotove Packaging Testing: ASTM D4169 shock and vibration as well as compression testing 1-2 packages with automotive steering gear assemblies.
ASTM D4169 for shock and vibration
Compression testing to validate stacking strength
India Materials Laboratory needed for ISO Surface cleanliness to ISO 8296-2003 . oil freeness test by ink test/ ARCO TEST on automotive component after cleaning and before painting
Materials Laboratory needed for ASTM or JIS Testing of light blocking capability of curtain . Lab test results according to JIS L 1055 Standard Testing methods for light blocking effect of curtain materials.
Manufacturer of chemical products for car wash and detail needed fr formulation development of new product in addition to VOC compliance testing and biodegradability testing of surfactants
Mechanical Laboratory needed for Gritting test for stabilink according to Renault specification. .
USA mechanical laboratory needed for SAE basic fuel filter testing as outlined in SAEj905. I would like to test multiple filters for resistance to flow and filter capacity and contamination removal characteristics.
ASAP: Automotive Car Parts Manufacturer moving to new manufacturing plant needs for automotive car parts testing of exterior plastic parts like Front and Rear bumpers, wheel covers, in panels and so on, and your early reply is very appreciated!
USA MATERIALS LABORATORY NEEDED FOR GENERAL MOTORS SEALING TESTING TO GMW3155 - GMW3149/GMW3152
Asia Laboratory needed for Desert Climate (Natural weathering test) follow standard ISO 877 method A,Plastics - Methods of exposure to solar radiation for 2 years and evaluate every 1 years
Mexico mechanical laboratory needed for automotive specification testing of painted automotive exterior plastic handles testing to VW TL 211 2014-07
Automotive Parts manufacturer of brake pads and brake linings for cars and trucks needs India, USA or UK Materials Laboratory for failure analysis, quality analysis of quantifications of their components, for safety and continuous quality purposes including: The mineralogy of brake pad samples should be determined by X-ray powder diffraction (XRD). and the texture, morphology and particle resolved composition of brake pads would be investigated by a Quanta 200 Scanning Electron Microscope equipped with energy-dispersive X-ray analyzer. For chemical determination samples acid-digested in duplicate by using a two-step digestion method devised by Querol et al. (1995). The resulting solution then analyzed by Inductively-Coupled Plasma Atomic-Emission Spectrometry (ICP-AES) and by Inductively-Coupled Plasma Mass Spectrometry (ICP-MS)(SEM
India ISO mechanical Laboratory needed for ASTM Testing: Engine performance testing and emission testing on coated piston
East Coast Automotive Laboratory needed for automobile headlight testing: headlamps for automobiles and we are having marks show up on the plastic lenses when they come out of the machines. We need this examined so we can find the reason why these parts are coming out with marks and we can find a way to resolve the issue.
Mechanical Laboratory needed for SAE Testing: Compression stress relaxation 1008hrs aging in air at 150°C. SAE J2979, Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination of Compressive Stress Relaxation (CSR)
India materials laboratory needed for tire sealant testing as per:
(A) Ethylene Glycol base Aqueous solution,anti corrosive,non-inflammable,non-explosive,rust proof,capable to seal punctures,pin hole leakages. (B) Should withstand centrifugal force up to 1400 RPM without breaking down. (C) Should have Minimum Shelf life of 07 years.
(D) The product should be approved by the National/International agency Environmental protection. (E) The product should have accredited by ISO/any other international standard for quality. "
China mechanical laboratory needed for metallographic evaluation. Analysis by liquid penetrant, Deflection to force the steering terminal and axial rod, etc of steering bar , axial ba componentes
USA ISO mechanical laboratory needed for ISO testing, IEEE testing and NVLAP testing: combination steering column component in an Anechoic Chamber. Parameters to meet include but not limited to vibration Frequency, db levels of the component at temperatures of -40C (low) and 80C (high) during testing
Mechanical Laboratory needed for SAE testing on truck/trailer cable to SAE J560 and SAE J2394 SAE J844 and SAE J1131. This is the coil cords you see between a semi truck and the trailer it pulls. Need testing for both the electrical cord and the air hoses for brakes.
Supplier of plastic parts for the automotive industry needs ISO automotive laboratory for GMW testing and ISO testing. Company is developing a new program with a customer for door parts. Attached is a list of tests we need to proceed on these parts in order to submit to approval. We are looking for an accreditated laboratory in USA to perform these tests for us. Could you please analyze this list and inform if you can perform to them? If you can do it please send us a quote, informing also the deadline and test specimen requirement. Thanks .
California automotive laboratory needed for automotive compliance testing to GMW 14650 (Performance Requirements for exterior Plastic Part). 2 Parts, 5 samples of each part.