Need laboratories to perform Plastics testing, analysis,
studies, research, development, assays, and experimentation? Contract Laboratory .com can assist your company, organization,
academic institution, or government agency in outsourcing independent,
commercial contract Plastics and Polymers laboratories to do all your
routine and non-routine Plastics and Polymers testing, analysis,
assays, experiments and research studies.
Plastics Testing and Research Services
Contract Laboratory can help you with all your Plastics testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs including:
Accelerated Weathering
Acid Value
Ash Content
Ballistics Properties
Barcol Hardness
Biodegradability Studies Research and Development
Brittleness Temperature
Brookfield Viscosity
Bulk
Burning Characteristics
Capillary Rheometry
Capillary Rheometry
Carbon F1F1F1 Content
Cellular Water
Charpy Impact
Chemical Compatiability
Chemical Resistance
Coefficient of Friction
Coefficient of Thermal Expansion
Cohesive Adhesion
Compression
Cure Kinetics
Deflection
Deformulation
Degree of Blistering
Degree of Flaking
Dielectric Constant
Differential Scanning Calorimetry
Dimensions
Durometer Heat
Dynamic Material Properties
Dynamic Mechnical Analysis
Elastomer
Electrical
Elongation
Environmental Stess
Environmental Stress Cracking
Extractability of Lead
Extractables
Extraction
Failure Analysis
Feasibility Studies
Finite Element Analysis
Flammability
Flex
Flexural Properties
Flexure Modulus
Flow Simulation
Gardner Impact
Gel Permeation Chromatography
Gloss
Hardness
Heat Deflection
Heat Deflection
Heat Deflection
High Shear Viscometry
Ignition
Impurities
Inclusion Rating
Instrumentaed Creep
Leaching Studies
Linear Mold Shrinkage
Linear Thermal Expansions
Low Shear Viscometry
Mechanical Properties
Melt Flow Rate
Melt Flow
Microstructural Analysis
Migration Studies
Migration
Moisture
Molecular Weight
Multiaxial Impact
Odor
Optical
Outdoor Weathering
Oxidative Stability
Oxygen Index
Packaging Analysis
Peel Strength
Physical Properties
Plastic Recycled Materials
Plasticizer Compatibility
Discoloration
Polyamide
Polymer Flow Analysis
Puncture
Quality Control
REACH
Reactivity
Remediation Research
Residual Styrene
Resilience
Resilience
Resistivity
Reverse Engineering
Rheological
RoHS WEEE
Rockfield Hardness
Rotational Rheometry
Rubber Properties
Simulated Environmental Exposures
Slip Resistance
Softening Point
Soluble Matter
Solubles
Solvent Extract
Solvent Resistance
Stability
Stain Resistance
Stiffness Measurement
Stress / Strain Curves
Stress Resistance
Surface Irregularities
Taber Abrasion
Tear Resistance
Tensile Izod
Tensile Modulus
Tensile Strength
Thermal Aging
Thermal Aging
Thermal Analysis
Thermal Cycling
Thermal Diffusivity
Thermal Expansion
Thermal Oxidative Stability
Thermal Properties
ThermoPlastics and Polymers
Torsion
Transmittance
Ultrasonic Characterization
Vicat Softening Point
Viscosity
Viscosity
Void Content
Volume Resistivity
Water Absorption
Water Absorption
Yellowness Index
Yield Stress Analysis
Type of Plastics Products
Contract Laboratory can assist your company, academic institution, government agency or organization in outsourcing contract laboratories to perform testing, analysis, and product development for many Plastics finished products, processes, systems, in-process materials, raw materials and components such as:
Thermoplastics
Rubbers
Latex
Foams
Elastomers
rubbers
latex
foamed materials
foaming agents
foam
polystyrene
nylon
glues
coatings
films
polymer films
HDPE
laminates
PE film
polycarbonates
monomers
shellac
amber
cellulose
sheeting
vinyl
soft polymers
PVC
polypropylene
fibers
polystyrene
PTFE
polycarbonate
cements
adhesives
insulation
ethyl cellulose
acrylic
lubricants
adhesives
plasticizers
gels
sealants
paint
gels
lubricants
acrylates
esters
etc. In industries such as automotive
toys
medical devices
aerospace
chemical
consumer products
Plastics Test Methods and Standards
Contract Laboratory can help with testing, analysis, assays, evaluations, examinations, inspections and certifications to different Plastics test methods, standards, procedures or specifications.
ASTM D256 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D1238-13: - Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1894-14: - Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D882-12: - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM D543-14: - Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D792-13: - ASTM D792-13: Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D695-15: - Standard Test Method for Compressive Properties of Rigid Plastics
ISO 4582 - Plastics Determination of changes in colour and variations in properties after exposure to daylight under glass
ISO 846:1997 - Plastics Evaluation of the action of microorganisms
ISO 306:2013 - Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
ISO 180:2000 - Plastics Determination of Izod impact strength
ISO 171:1980 - Plastics Determination of bulk factor of moulding materials
ISO 172:1978 - Plastics Phenol-formaldehyde mouldings Detection of free ammonia
ISO 1628-2] - Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176:2005 - Plastics Determination of loss of plasticizers Activated carbon method
ISO 177:2016 - Plastics Determination of migration of plasticizers
ISO 178:2010 - Plastics Determination of flexural properties
ISO 179 - Plastics Determination of Charpy impact properties
ISO 62:2008 - ISO 62:2008 Plastics Determination of water absorption
ISO 119:1977 - 7 Plastics Phenol-formaldehyde mouldings Determination of free phenols Iodometric method
ISO 120:1977 - Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Colorimetric comparison method
ASTM E2954-15 - Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ISO 4577 - Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
ISO 527 - Plastics -- Determination of tensile properties
ISO 179 - Plastics -- Determination of Charpy impact properties
ISO 1452-2:2009 - Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Pipes
IEC 60674-3-2 - Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
ISO 7617-2:2003 - Plastics-coated fabrics for upholstery -- Part 2: Specification for PVC-coated woven fabrics
ISO 7617-3:1988 - ISO Plastics-coated fabrics for upholstery -- Part 3: Specification for polyurethane-coated woven fabrics
EN 1329 - Plastics Piping Systems For Soil And Waste Discharge (Low And High Temperature) Within The Building Structure. Unplasticized Poly(Vinyl Chloride) (PVC-U). Specifications For Pipes, Fittings And The System (British Standard)
ISO 10082 - Plastics -- Phenolic resins -- Classification and test methods
ASTM 3892 - Standard Practice for Packaging/Packing of Plastics
ISO 8988 - Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method
ISO 7327 - Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride
ISO 29644 - Plastics - Artificial weathering including acidic deposition
GM 7400M - Material Specification Plastics
BMW BMW GS 97045-2 - Painted Plastic Parts Interior & Exterior
ASTM D1435 - Standard Practice for Outdoor Weathering of Plastics
ASTM D7031 - Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
DoD 13130 - Materials And Articles In Contact With Foodstuffs - Plastics Substances Subject To Limitation - Part 3: Determination Of Acrylonitrile In Food And Food Simulants
AASHTO R 93 - Standard Practice for Service Life Determination of Corrugated HDPE Pipes Manufactured with Recycled Content
ISO 10093 - Plastics - Fire tests - Standard ignition sources
ISO 16486 - Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings
ASTM D4363-21 - Standard Specification for Thermoplastic Chlorinated Polyethylene (CPE) Jacket for Wire and Cable
AASHTO M-337 - Standard Specification for Fiber-Reinforced Polymer Composite Materials for Highway and Bridge Structures
ISO 14782 - PLASTICS - DETERMINATION OF HAZE FOR TRANSPARENT MATERIALS
ASTM F1487-21 - Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
Caption: Plastic Regrind Testing
Need Plastics Testing or Scientific Research Services?
We can help with all your Plastics lab testing and scientific research needs! Call 1-855-377-6821 or
