For more information, please call Toll-Free 1-877-353-0451 or email us
CONTRACT LABORATORY . COM
The Mechanical Laboratory Outsource Network!
Directories
Careers
Events
Resources
Experts
News
Site Map
Mechanical Lab Registration Benefits Register Your Mechanical Laboratory Submit Mechanical Lab Testing Requests
Accounts

You are not logged in.

Lab Requests
Lab Test Requests
Lab Directories
Service Requests

Business Opportunities
Product Requests
Specials & Discounts
About Us
Test Requests
Registration
Mechanical, toxicology testing, cytotoxicity testing, preclinical testing, sterility testing, analytical chemistry testing, microbiology testing, bioanalytical testing, environmental testing, pharmaceutical testing, food testing, product safety testing, water testing, bioburden testing  Mechanical Laboratory Testing Requests
IMAGE SOURCE:CDC PHIL Technician performing Western Blot testing. Antigens if present will bind and be detected.
View All Laboratory Test Requests
Submit Mechanical Laboratory Test Requests

Contract Laboratory.com has received the following incoming Mechanical Laboratory Test Requests which need to be fulfilled ! These Mechanical Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational corporations to government agencies actively seeking Mechanical laboratories to perform their Mechanical laboratory testing and research. If your Laboratory receives Laboratory Test Requests that it can not fulfill, please refer them to us! If you have questions, please e-mail us or call 403-770-1992 .
Incoming Mechanical Laboratory Test Requests
No.
Mechanical Testing or Mechanical Description
status
10-00356 Mechanical Certification Laboratory needed for ANSI, ISEA Mechanical Ratings Testing, certificate through your esteemed laboratory for our gloves as follows ; Item : Safety Gloves Description : HPPE fiber(yarn) knitted gloves, Polyurethane coated gloves ( read more ).....
10-00315 India Physical Laboratory needed for NFC 33020 routine testing of insulation piercing connectors as per NFC 33020 standards. Mechanical tensile strength, electrical current carrying capacity, enviornmental testing (corrosion/water immersion test etc). ( read more ).....
10-00287 GLP Contract Research Organization needed for testing contact lenses for preparing pre-market notification submission to US FDA. Required Tests: Refractive index, Colour and Light transmittance, Oxygen permeability, Lens mechanical properties, Leachability of monomers, crosslinkers, UV absorber and tint, Toxicology test for packaging, USP Sterility test ( read more ).....
10-00286 Mechanical Laboratory needed for Moisture content determination to ASME Boiler Pressure Vessel Code Section 2C SFA 5.1 ( read more ).....
10-00241 China Analytical Laboratory needed for EN 1563 mechanical testing such as brinell hardness, tensile, yield strength, elongation, chary values, and microstructure. Testing ductile iron for the wind energy for ductile grade 400-18U-LT. ( read more ).....
10-00202 USA Analytical chemistry Laboratory needed for Dynamic mechanical analysis (DMA), FTIR gel permeation chromatography (GPC),Differential Scanning Calorimetry (DSC) ( read more ).....
10-00188 USA mechanical laboratory needed for SAE J1088 emission testing of ATV on engine based ( read more ).....Closed
10-00176 Ontario Materials Laboratory needed for forensic testing on a u-bolt failure that we would like investigated. We would like to get mechanical chemical and failure analysis completed as soon as possible. ( read more ).....
10-00165 Physical / mechanical laboratory needed for ISO8688 testing, Tool wear testing ( read more ).....
10-00153 Building Company needs Southeast USA, IAS, A2LA mechanical laboratory for Weld testing ( read more ).....
10-00097 INDIA MATERIAL LABORATORY NEEDED FOR ASTM MECHANICAL TESTING COMPOSITE MATERIALS, AS FLY ASH FURTHER CRUSHED IN BALL MILLS AND THAT MICRON SIZE FINE POWDER HAS TO MIX WITH DUCTILE METAL BY STIR CASTING TO STUDY THE MECHANICAL PROPERTIES OF THAT FINAL PRODUCT ( read more ).....Closed
10-00095 Massachusetts Physical Mechanical Laboratory needed for testing ISO 594-1 Luer fitting ( read more ).....
10-00085 Eastern Europe Mechanical Laboratory needed for EN 13948 Testing, Bitumen Membranes in root penetration ( read more ).....
10-00079 Central NJ mechanical laboratory needed for eddy current testing of stainless steel castings" ( read more ).....Closed
10-00068 USA Mechanical Laboratory needed for Mechanical actuation in harsh environment, Component testing at elevated temperature and vibration while actuating component. ( read more ).....
10-00058 Mechanical Forensics Laboratory for investigation testing, stress fracture imaging of tool that has failed (broken) offshore. Would it be possible to have this part inspected and magnified images of any stress fractures, pitting, cracks and deformalities within the part. We would also like a report stating the type of metal and outlining possible causes for the part separating. ( read more ).....
10-00050 Eastern USA Mechanical Laboratory needed for ASTM F648 Testing on UHMW-PE fabricated forms, including density, ash, tensiles and double notch izod and charpy testing. ( read more ).....
10-00047 Mechanical Laboratory urgently needed for ASTM1894-93 Coefficient of friction testing. Please advise. Urgent. ( read more ).....
10-00036 A2LA Mechanical Laboratory needed for ASTM mechanical properties testing for a turbine engine compressor blade that is very small in size. Need to be able to make test specimen from the final blade configuration. ( read more ).....
09-2507 MATERIALS LABORATORY NEEDED FOR MECHANICAL TESTING COMPOSITE MATERIALS, AS FLY ASH FURTHER CRUSHED IN BALL MILLS AND THAT MICRON SIZE FINE POWDER HAS TO MIX WITH DUCTILE METAL BY STIR CASTING TO STUDY THE MECHANICAL PROPERTIES OF THAT FINAL PRODUCT ( read more ).....Closed
09-2485 USA Physical, Mechnical Laboratory needed for Mechanical Testing: Tensile AND Torsion Testing required for Friction Welded Joint. I have 3 different companies supplying samples. I want to compare welds. ( read more ).....
09-2430 Preclinical Biomechanical Laboratory needed for ISO Orthopedic Implant Knee/Hip wear testing ISO 14243-1:2009 and ISO 14243-2:2009 2) Hip wear testing :ISO 14243-1:2009 ( read more ).....
09-2394 Mississauga Mechanical Physical Laboratory needed for ASME Testing of Boilers to MIL-PRF-25567E Appendix A from the asme boiler and pressure section V To test our leak detector fluids to determine if the support mold growth, ( read more ).....Closed
09-2351 Mechanical Laboratory needed for thermal, combustion testing, glycerol combustion experiments and would like to measure the acrolein emission in the exhaust. I have following questions. 1. Do you do acrolein measurements? 2. What sampling procedure you recommend us to use? (molecular sieves or trapped gas in a container or anything else). 3. Whether you provide sampling equipments material necessary or we have to procure from other source and send you the sample of exhaust gas for acrolein measu ( read more ).....Closed
09-2304 USA Biomechanical Laboratory needed for torsional testing on biological samples (bone). ( read more ).....
09-2274 Mechanical Laboratory needed for ANSI B71.1 Testing of new lawnmower ( read more ).....
09-2228 Large Chemical Mfg needs USA/Canada Materials Laboratory packaging testing for Materials ID and physical/mechanical properties of Super-sack bag for failure analysis ( read more ).....Closed
09-2219 Mechanical laboratory needed for ACSR Moose conductor testing: 1 salt-fog test 2 AC resistance & reactance test at 75deg C 3 Self Damping Test & 4 Stiffness test ( read more ).....
09-2206 Mechanical Laboratory needed for ASTM testing, ASTM D5500 and D6201 of engine deposits, while ours does not. We want comparative data to support this. (We will not publish the name of the competitor, of course) How much does this kind of testing cost? ( read more ).....
09-2198 Mechanical Laboratory needed for NFC testing for ABC accessaries ( read more ).....Closed
09-2183 Electrical and Mechanical Laboratories needed for Complete testing of low voltage aerial bunched cable accessories like insulation ptercing connectors,suspension clamps, anchoring clamps etc.according to NFC33020; NFC33040; NFC33041; NFC33042; NFC20540; NFC33003; NFC33004; EN50483 PART 1 TO 5 ( read more ).....Closed
09-2177 Italy Electrical Laboratory required for testing welding cables according to ** CEI 60228 3rd edition 2004-11 for copper ( electrical properties )** CEI 60502-1 for sizes and dimensions of coating ** CEI 811-1.1 for mechanical properties ** CEI 811-1.2 for mechanical properties ** CEI 603321 for flame resistance ( read more ).....Closed
09-2123 ISO Mechanical Laboratory for ASTM F 382-99, ASTM F 543-07, ISO 6475:1989, ISO 9585:1990 product safety testing. We want some of our plates and screws to be exposed to mechanical tests (like static test) ( read more ).....Closed
As a company, we produce orthopaedical medical devices. We want some of our plates and screws to be exposed to mechanical tests (like static test) ( read more ).....Closed
As a company, we produce orthopaedical medical devices. We want some of our plates and screws to be exposed to mechanical tests (like static test) ( read more ).....Closed
09-2059 Mechanical Laboratory required for testing: I- toruqe & U- Toruqe test and we are using these test to detect subtle differences in body Catheter performance (85cm aprox). The Dynamic `U' Test is designed to measure the rotational transmissivity of a sample of body material. This test can also measure the amount of torque required to turn the sample while it is held in a `U'-shape. One end of the sample is attached to a torque gauge/motor assembly and the other end is connected to a rotation ( read more ).....Closed
09-2053 Canada Preferred Mechanical and Enviromental Laboratories required for: 1-Mechanical shock to 270 pounds system to ANSI N42.43-2006 standard 2- Dust and moisture protection to ANSI N42.43-2006 standard ( read more ).....Closed
09-2039 Europe or USA ISO 14243-1 Mechanical Laboratory required for wear testing of knee implant according to ISO14243-1 ( read more ).....
09-2031 India, China Mechanical Laboratory required to do stress rupture test (creep test) ( read more ).....Closed
09-1971 Mechanical Laboratory needed for DIN 590 testing for 4 engines for chemical composition of diesel fuel adhere to the DIN 590 for Euro 4 engines ( read more ).....Closed
09-1950 Asia, India ASTM F2079 Mechanical Laboratory needed for Radial strength and recoil of cardiac stent ( read more ).....Closed
09-1944 DIN 53453 Mechanical Laboratory required for impact test on plastic foam ( read more ).....Closed
09-1940 Mechanical Laboratory needed to perform DWTT per API RP 5L3. The lab must have certifications in order to be included on our approved vendor list. ( read more ).....Closed
09-1929 USA Mechanical Laboratory needed for implant testing on a partial knee replacement. We have a partial knee device that we would like to have mechanically tested, specifically in a mode that is common for partial knee testing. I know there is no specific industry or government standard for this yet, but we have at least heard of "rock-testing" and other tests that repeatedly load the implant components against each other in a way that is found, at least to a degree, in natural functioning of the ( read more ).....
09-1906 Canada Mechanical Laboratory required to perform Ashrae 70 flow test of floor diffuser ( read more ).....Closed
09-1898 USA Mechanical Laboratory required for Non-woven fabric sample to be tested as per ASHRAE 52.2 ( read more ).....Closed
09-1896 Europe ASTM Mechanical Laboratory needed for hot tensile test (acc.SR EN 10002-5:2005) 900oC 2 test bars low cycle fatigue at 900oC (acc ASTM E 606) 2 test bars, Material Steel, grades 34MnVSi5 and C70S6 ( read more ).....Closed
09-1859 USA GM9129P MECHANICAL LABORATORY NEEDED FABRIC STRENGTH TEST - TEST FOR SLIPPAGE (PULLOUT) AND ELONGATION OF NEEDLE HOLES AFTER SEWING FABRIC TOGETHER ( read more ).....Closed
09-1850 Asia/USA/Canada FDA Biomedical/Mechanical Laboratory required for testing AS5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors: Part 1: Cones and sockets ( read more ).....Closed
09-1825 Asia NFC 33-209 Mechanical Laboratory required for Wearablity test for Aerial Bundled Cables as per NFC 33-209 ( read more ).....Closed
09-1817 Asia ASTM Mechanical Laboratory required for the following Tests: · In-Plane Tension - ASTM D3039 · In-Plane Shear - ASTM D2719 · Flexural Test - ASTM C393 ( read more ).....
09-1800 Asia - Thailand Analytical Chemistry, Materials/Mechanical Laboratory required for the following tests: 3.5.1 Density, Core ISO 845/ASTM D 3574, Test A 3.5.5 Heat Aging ISO 2440/ASTM D 3574, Test K,22 h at 140 +/- 2 °C "3.5.5.1 Compression Deflection Stress Change " ISO 3386/1, 40% compression, 100 x 100 x 50 mm specimen, 100 +/- 20 mm/minute test speed, 3 specimens minimum 3.5.6 Humidity Aging (AUTOCLAVE) ISO 2440/ASTM 3574, Test J, 100 x 100 x 50 mm specimen, 5 h at 120 °C 3.5.6.1 Comp ( read more ).....Closed
09-1758 Mechanical Laboratory needed to test newly invented rotary mechanical system without energy support. ( read more ).....Closed
09-1754 Southeast U.S. Mechanical Laboratory required that can strength test and certify "hand tool" products for us when the need requires. The tools reference are: hand wrenches, sockets, screwdrivers etc. ( read more ).....Closed
09-1680 Russia, St. Petursburg or Moscow Analytical Chemistry and Mechanical Laboratory needed for the following testing: Chemical - C, Si, Mn, Cr, Ni, Cu, Su, P. Mechanical - Tensile Strength, Relative Elongation, Impact Strength, Yield Strength etc ( read more ).....Closed
09-1537 Ottawa or Toronto Product Safety Testing Laboratory required for mechanical safety/operation testing of compressed air powered hand tool to determine if it is operating to specification, if it has been modified, or components have failed, certify that it is safe to return to service ( read more ).....
09-1534 Canada Mechanical Laboratory needed for vehible baseline testing of diesel engine to record output power, emissions, etc...Our company is currently working on an on-board hydrogen generator (through electrolysis) product which would then be compared to the baseline results to quantify the improvement (if any) in performance and emissions. Lab should be preferably accredited for any kind of environmental testing, but this is not a firm requirement. Lab can help in building up this setup or in ( read more ).....Closed
09-1528 USA Mechanical/Materials Laboratory needed that can test according to DIN 40050-9 Protection against foreign objects, and water ( read more ).....
09-1486 USA MECHANICAL LABORATORY NEEDED FOR RIVETED PEEL TEST ( read more ).....Closed
09-1408 Mechanical Laboratory needed for testing automotive water pumps. ( read more ).....Closed
09-1394 Mechanical/Engineering Laboratory required for Life/Reliability Testing. I'm looking for assistance in developing and performing a life test for a hydraulic drive system for heavy trucking application. System includes pump/motor, transfer case, accumulator and reservoir. I need cold chamber with humidity controls, test stand, drive input, and controllers for driving profile. Would be great if you have experience with powertrain systems which include transfer cases, transmissions and axles ( read more ).....
09-1359 India Seals ISO/PAS17712 Mechanical Laboratory needed to certify my product. ( read more ).....Closed
09-1329 Asia, preferable Singapore Mechanical Laboratory needed to do composite panel/coupon testing, Mechanical, Fire and Lightning(optional)test. ( read more ).....Closed
09-1322 Mechanical or Materials Laboratory required to do solar module mechanical load testing. ( read more ).....Closed
09-1310 Guanzdong, China - Hong Kong Mechanical Laboratory needed for Charpy Impact Test for Metal (CRS) ( read more ).....Closed
09-1188 Toronto Mechanical Laboratory needed for Rockwell Hardness Testing, material check, tensile and yield strength on fastener-type parts. ( read more ).....Closed
09-1140 Manufacturer of compressed air filters and elements needs physical mechanical laboratory for ISO12500 validation testing of the filtration performance of our products according to ISO-8573.1 ( read more ).....Closed
09-1122 Malaysia Mechanical Laboratory needed for ASTM, Rockwell Hardness Test on Engine Valve Tip End ( read more ).....Closed
09-1112 Materials Laboratory needed for ISO 10819:1996 Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand Abstract Specifies a method for the laboratory measurement, the data analysis and reporting of the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31,5 Hz to 1250 Hz. ( read more ).....Closed
09-1074 India Mechanical Laboratory needed for torque and load testing of Window Regulators. Fixtures would be provided but current traces and manual torques need to be measured under various load conditions ( read more ).....Closed
09-1039 California Mechanical Laboratory needed for CPSC and DIN Testing of Automatic Brake System for bicycles and bikers safety ( read more ).....Closed
09-1007 India Mechanical Laboratory needed for BS Testing, Wear resistance testing facility for pvc/nitrile extruded profile(kind of Rubber) (wiper tip)as per the standard BS 903A1 ( read more ).....Closed
09-1002 USA Mechanical Laboratory needed for SAE Testing, Mechanical Testing of Bushings Including 4 Load Tests And One Hydraulic Test ( read more ).....Closed
09-0995 India Materials Laboratory needed for failure investigation testing of rubber elastomer sealing rated to 400 degF but recently has failed. We are not sure how and why it failed and would like to know the mode/cause of failure. Is it chemical/ mechanical or thermal? ( read more ).....Closed
09-0815 Asia Mining Laboratory needed for geomechanical testing for mineral dressing, exploration, rock analyze, geomechanics, anythings about mining software 6.metallurgy lab 7.surveying lab 8.mineralogy lab 9.blasting lab 10.structure geology lab 11.geophysics lab please send me the price and the spec. of the equipment soon.. ( read more ).....Closed
09-0802 Singapore ISO metallurgical laboratory needed to analyze / check material chemical composition and mechanical properties of 304 stainless steel samples cut out from ship's cargo pipe line system. ( read more ).....Closed
09-0786 China mechanical laboratory needed for performance testing, wiper motor assay. to be tested before using on vehicle as OE product ( read more ).....Closed
09-0672 Engineering Company needs Mechanical Laboratory to Test compnent for Surcafe mount technology solder reflow profile peak temperature 240ºC ( read more ).....Closed
09-0533 MIDDLE EAST MFG NEEDS MECHANICAL LABORATORY NEEDED FOR TESTING SUBSTRATE OF CATALYTICAL CONVERTERS FOR RHODIUM - PLATINUM - PALLADIUM ( read more ).....Closed
09-0530 India Mechanical Laboratory needed for ASTM Vehicle Testing as per ASTM D 4169-05: Schedule C:- Vehicle Stacking Schedule E:- Vehicle Vibration Schedule F:- Loose Load Vibration Schedule I :- Low Pressure A (High Altitude) Schedule A:- Handling Schedule B:- Warehouse Stacking ( read more ).....Closed
09-0497 USA physical, mechanical laboratory needed for ASHRAE Testing of fan like device for dust contamination with ASHRAE test dust #2. Test would be variation on the stadard 52.1 and 52.2 ( read more ).....Closed
09-0480 Florida Pharmaceuticals Company needs USA Laboratory for "complex viscosity" testing, for one of our silicone materials (Pressure Sensitive Adhesive) and I was wondering if your company has the capabilities of performing such testing for us. The method is used to characterize the rheological properties of visco-elastic materials by employing a dynamic mechanical spectrometer. An Oscillating strain is imposed on the sample and the resulting stress is measured over the sweep range. Values for Torq ( read more ).....Closed
09-0479 USA-Michigan A2LA MechanicalLaboratory needed for Front & Rear Door system SLAM durability testing.Test GMT900 vehicle Front & Rear doors ABUSIVE test load only (39 Joules) 4000 cycles (2 front doors) 2200 cycles @ ambient temp 1000 @ 80C ambient air 400 @ +38C/95% RH 400 @ -30C/ ambient air 1600 cyles for rear doors 880 @ ambient temp 400 @ +80C ambient air 160 @ +38C/95% RH 160 cycles @ -30C ambient air Four doors cycling concurently at an average rate o ( read more ).....Closed
09-0454 UK Materials Laboratory needed for MPI testing a materials ( read more ).....Closed
09-0383 USA FDA GMP Biobechanical Laboratory needed for testing for Biomechanical properties of frozen human tissues, including tensile strength, creep tests, etc. ( read more ).....Closed
09-0370 Paneling Company needs USA Mechanical Laboratory for ASTM C323 Testing of BALSA WOOD PANEL WITH POLYESTER LAMINATE AND THEN CONDUCT FOLLOWING A PROTOCOL WE HAVEA TEST AS ASTM C323, IT IS A CRACKED SANDWICH BEAM TEST, AND ALSO IN A SIMILAR SANDWICH SAMPLE PERFORM A A CLIMBING DRUM PEEL TEST, FOLLOWING A PROTOCOL WE HAVE, SIMILAR TO ASTM D-178176, WE WOULD PREFER IF THE FACILITY IS LOCATED IN FLORIDA . ( read more ).....Closed
09-0351 Flooring manufacturer needs Canada mechanical laboratory for ASME certification testing for shower drain, which made by ABS compound and 304SS drain grate. ( read more ).....Closed
09-0333 Research Foundation needs Eastern USA biomechanical laboratory for Cyclic testing of allografts for ACL reconstruction involving a cadaver tibia, a tibial fixation device, and various allografts. This will be a pilot study (for the specific tibial fixation device in question). ( read more ).....Closed
09-0316 Large Consumer Products Manufacturer needs Product Safety Laboratory for ASTM and EN Testing: Mechanical Hazards ASTM F963-07 Flammability EN71,pt2 Heavy Metals Content EN71, pt3 ( read more ).....Closed
09-0312 USA Mechanical laboratory needed to Analyze output: Oxide mass over time Method:parabolic rate ( read more ).....Closed
09-0252 Canada ASTM Mechanical Laboratory needed for testing tensile strength of morter(made with sand and latex paint)- ASTM C 307-03. ( read more ).....Closed
09-0250 Venezuela API, ASME Metallurgical or Mechanical Laboratory required for Charpy Welding test. ( read more ).....Closed
09-0248 ISO ASTM Materials or Mechanical Laboratory required for testing the following: iso 844. iso 845, iso 1922, iso 2896, ASTM D 1621 ( read more ).....Closed
09-0193 USA ISO Mechanical or Materials Laboratory required for mechanical performance testing of lower limb prosthetic devices to validate performance to meet ISO standards and comparison to "Real World" use senarios. There is a need for real world testing. He wants methodology that goes beyond the ISO standard (10328). In terms of standards it has to at least meet the 10328 standard. The sample size is to be determined. ( read more ).....Closed
09-0157 Mississauga ON BAERD GEN-018 2D Bombardier CTS 0002-2D Mechanical Laboratory needed for adhesive Shear test. ( read more ).....Closed
09-0148 USA Mechanical Laboratory required for a load test of a cart. The cart weighs about 100 pounds, we want to know if it can safely hold 4,000 pounds. We have the physical sample that can be destroyed. ( read more ).....Closed
09-0137 Mechanical Laboratory required for testing a new ducted-blade radial motor for automobiles and other applications. Testing to focus on energy input/output, safety, manufacturing challenges ( read more ).....
09-0105 California Mechanical Laboratory needed for 400 pound mechanical load test of two (2) davit arms on a skid assembly. Require mechanical load test and affixing of test label plate ( read more ).....Closed
09-0009 USA/Inida UL 1446 Electrical Laboratory needed for sealed tube test - electrical insulation testing as per UL 1446. After completion of a long-term thermal aging program, manufacturers may wish to add new minor components to the EIS. Such components include but are not limited to fastening tapes, tie cords, balancing compounds and other materials commonly used in mechanical applications. Rather than conducting another long-term thermal aging program to address the chemical compatibility of thes ( read more ).....Closed
08-2577 Midwest USA ASTM 159-83, DIN 1686-2, and 1685-1 and EN1563:1997 Mechanical/Analytical Laboratory needed for testing Gray(class 2500-3500)and Ductile irons(65-45-12) for windmill industry. Tensile (inc. yield and elongation), Brinell,Chemical Composition, Microstructures,and Charpy on ductile 400-18U LT. ( read more ).....Closed
08-2558 India ASTM Materials Testing Laboratory needed for: Plastics Discoloration Testing Physical Properties Testing Simulated Environmental Exposures Testing Studies Heat Deflection Testing Mechanical Properties Testing Peel Strength Testing Flexure Modulus Testing  Tensile Strength Testing  Elongation Testing  Hardness Testing  Thermal Properties Testing  Solvent Resistance Testing Tensile Modulus Testing  Solubles Testing  Dielectric Constant Testing  Deflection Testi ( read more ).....Closed
08-2451 Any Location ISO 177:1988 Mechanical Testing Laboratory needed for migration of plasticizers in PVC material (sandwitch type test of)... Hard chrome plated steel plate Contact plate(Polystyrol 165N) Test sample(PVC shore A 30) Contact plate(Polystyrol 165N) Hard chrome plated steel plate ( read more ).....Closed
08-2421 India NFC 33-040 & NFC 33-041 Mechanical Testing Laboratory needed for endurance test under thermal and mechanical stress on suspension and tension assembly for ab cable. ( read more ).....Closed
08-2403 Mumbai(India) Mechanical Laboratory needed for testing Sewage Submersible Pumps. ( read more ).....Closed
08-2394 USA Mechanical Laboratory needed to test the friability of a powdered material to assess batch to batch differences. ( read more ).....Closed
08-2306 Vietnam Metallurgical Laboratory needed for the following tests: Metallography Heat treatement Mechanical properties Test Rolling forming Casting ( read more ).....Closed
08-2250 Eastern USA Mechanical laboratory needed to do Product Safety Testing (Intrinsic safety of a mechanical tank gauge in gasoline). ( read more ).....Closed
08-2130 Canada Toys Laboratory needed for ASTM product safety mechanical testing for conformity to the canadian toy safety ( read more ).....Closed
08-2128 USA Mechanical Lab needed for ASTM/DIN/ISO Testing for Grease corrosion resistance comparison. Emcor rust test, direct and indirect wash resistance, using plant site process water (pH 11), comparison of 3 or 4 products. ( read more ).....Closed
08-2101 Biomechanical product safety laboratory needed for testing (via indentation testing) the skull bones of mice that have been regenerated utilizing stem cells, scaffolds and various growth factors ( read more ).....Closed
08-2028 USA Laboratory needed for ANSHI/AHAM Testing on Clean Air Delivery Rate per ANSI/AHAM AC-1 on portable air cleaner ( read more ).....Closed
08-1896 New Mexico mechanical laboratory needed for Rockwell Testing of engine camshaft ( read more ).....Closed
08-1831 Europe Materials Laboratory needed for DIN Testing DIN 22102of Rubber conveyor belt with textiles ( read more ).....Closed
08-1809 A2LA East Coast Physical, Materials Laboratory needed Flammability testing per FMVSS302. A2LA accredited lab, chemical and mechanical scope. ( read more ).....Closed
08-1743 USA Textiles Laboratory needed for SAEJ369, FMVSS302, ASTM D461 Testing 100% Polyester Sample Size: As per requested Melting Point (Minimum) at 482F (250C) using Differential Scanning Calorimetry (DSC) Softening Point (Minimum) at 428F (220C) using Thermomechanical Analysis (TMA) or Differential Scanning Calorimetry (DSC) Unit Weight Test at 7.0oz/yd^2 (237 g/m^2) +/- 10% Thickness Test 0.140in +/- 10% by ASTM D461 Fire Resistance according to SAEJ369 / FMVSS302 ( read more ).....Closed
08-1715 China ISO 9001 or 1702 mechanical laboratory needed for ASTM mechanical testing by DSC, DMA, TGA, rheology, mechanical testing (Instron), impact testing, GPC, HPLC, GC, NMR, titrations in China ( read more ).....Closed
08-1713 India Mechanical Laboratory needed for JIS Akron Wear Abrasion Testing, Wear Resistance Test: Details are as follows Load: 44.1 N Inclination Angle: 15 Degrees Rotating Speed: 250 RPM Test Times: 1000 Cycles Result: Amount of Wear <= 0.25 cm3 Further ref. from JIS K 6264 ( read more ).....Closed
08-1550 Europe analytical chemistry laboratory needed for API Testing for Chemical composition (C, Mn, P, S, Cr, Ni, Cu, Mo, Nb, Si, Ti, V), including Carbon Equivalent (CE); - Mechanical properties for both body and welded joints (for welded pipes): - Tensile properties (tensile, yield, elongation); - Bend tests; - Charpy tests; - Metallographic examination ( read more ).....Closed
08-1479 Mechanical, Electrical laboratory needed for ISO 6722 & JIS C 3102 testing for Road vehicles - 60 V and 600 V single-core cables - Dimensions, test methods and requirements and Annealed copper wires for electrical purposes ( read more ).....Closed
08-1440 Western Canada metallurgical laboratory needed to determine the composition of a small metal sample. ( read more ).....Closed
08-1395 Mechanical laboratory needed for Minimum tensile strength, Minimum shear strength Minimum torsional strength Pull out value for different thickness of purlins Pull over value for profile sheets of different thickness. ( read more ).....Closed
08-1287 Asia on-site non-destructive laboratory needed for non-destructive testing of steel cable such as lift / crane cables. ( read more ).....Closed
08-1285 USA Physical Laboratory needed for Cleanliness testing to ISO 16232 ( read more ).....Closed
08-1166 Michigan Automotive/Mechanical Laboratory needed to Teat a small vehicle on a Global Electric Motorcar (GEM) chassis for compliane with ANSI 56.8 Burden/Personnal carriers ( read more ).....Closed
08-1164 USA Automotive, mechanical laboratory needed for certificaiton testing of 800CC IN FRAME UTV CHERY ENGINE ( read more ).....Closed
08-1155 EPA USA Environmental, Mechanical Laboratory needed for EPA, DOT certification testing: gassious emmissions; physical examination of vehicle for compliance ( read more ).....Closed
08-0187 USA or Canada Mechanical and Electrical Laboratory needed fro Cyclic dynamic load testing of railroad resilient rail fastening device to a Vertical & Lateral Repeated Load Test: A vertical downward load to a rail head of 12kips, & a lateral load of 3,900 lbs on one side & 2,700 lbs to the other. The application of lateral loads shall be , each combined with alternating applications & release of the vertical load, for a total of three million cycles. Application of the vertical load & each of ( read more ).....Closed
08-1074 Mechanical Laboratory needed in Europe for MIL-STD Vibration & Shock Testing to MIL-STD-167 and MIL-S-901D ( read more ).....Closed
08-1062 FDA GMP Mechanical Laboratory needed for Dynamic Mechanical Analysis(DMA), Tensile Testing, Compression Testing ( read more ).....Closed
08-1046 Mechanical Laboratory needed for Product concept evaluation and optimization requiring: knowledge and equipment related to low pressure/flow air delivery, consumer products, DOX,laboratory practice and data recording, fixturing, potential system improvements and optimization. Familiarity with micropumps and nozzles helpful. ( read more ).....Closed
08-0749 California lab needed to test mortise lock. Needs ANSI testing Grade 1, 2 or 3. ( read more ).....Closed
08-0745 Canadian lab needed with mechanical durability capabilities. Tes Vibration Table to evaluate mechanical durability of an ultrasound structure and arm. Mechanical Arm Actuation to evaluate torsional spring life. ( read more ).....Closed
08-0739 USA automotive, mechanical lab needed to test: Tie Rod Boot- Key Life Test ES SPEC-LFL Seal Test A well as wear test, wind-up test, fold test, cocked at assembly test, retention test, cold flexibility test, retainer ductility test ( read more ).....Closed
08-0734 GLP and ISO Mechanical Lab needed for testing to determine coefficient of friction and friction resistance ( read more ).....Closed
08-0691 ANSI 156.11 Cycle Testing and Physical testing of showcase and cabinet locks per the A156.11 spec - looking to have our locks conform to minimum grade 2, but grade 1 preferred ( read more ).....Closed
08-0677 Eastern PA Metallurgial Lab needed to test metal to determine properties of product, so we can find what other "trademarks" have the same properties. ( read more ).....Closed
08-0602 ISO 9000/ASTM US Analytical Chemistry Lab to conduct Analytical or Physical mechanical tests on lubricity and slip of topical creams ( read more ).....Closed
08-0589 Mechanical Lab needed in Australia for ISO/IP analytical chemsitry testing on engine coolant- spectrometric,pH,precipitation,conductivity,refractive index brix%,glycol concentration%,nitrite,sulphate,total hardness,appearance. Oil in water emulsions- spectrometric,pH,bacteria/fungi,micro exam,conductivity,refractive index brix%,concentration%.Diesel Fuel- bacteria,particle count,waterppm,micro exam,density,flash point, sulphur IP336,lubricity IP450, ( read more ).....Closed
08-0575 US Mechanical, Analytical Chemistry Lab for Na-CMC (sodium carboxymethyl cellulose)testing of ion exchanged such as to become Li-CMC. I need a few grams of Li-CMC product (between 10 and 100). I also need Li and Na concentration data on the starting material and product in aqueous solution to show that the Na has indeed been replaced by Li. The product should be sent to me in a lyophilized state, and the data via email. Please quote a price per gram. ( read more ).....Closed
08-0564 NABL Accredited, ISO Materials Lab needed for Metallurgical evaluation, Mechanical testing, Coating development, failure analysis, corrosion testing, creep, fatigue and stress rupture testing. ( read more ).....Closed
08-0551 Mechanical /Physical Lab needed for ANSI Product Safety Testing to CE Standards of dynamic and static strength of Full body Harness and other fall arrest systems and sub componenets as per EN and ANSI standards ( read more ).....Closed
08-0502 Product Safety laboratory needed for UL/CE certification testing of Personal Protection Equipment EN-12275 Connectors/UIAA-121 1. strength in main direction 2. strenght in transverse direction 3. gate open strenght We need to know the strength testing on this connector, type B. I would also like to know the turn around as far as time. Could you also give us a quote on price. strength in main direction gate open strength strength in transverse direction Thank you, ( read more ).....Closed
08-0495 Mechanical laboratory needed for cmvss testing ( read more ).....Closed
08-0491 Mechanical Laboratory needed for ASTM compressive strength testing of concrete cylinder or block. ( read more ).....Closed
08-0490 Mechanical Laboratory needed for testing car parts ( read more ).....Closed
08-0487 FDA GMP mechanical/electrical lab needed for ASTM Emission test of a ventilator(medical device). VOC analysis according to ASTM D5466-01 ( read more ).....Closed
08-0455 Mechanical Lab needed for Dynamic mechanical analysis on polymer blends. I would like to understand modulus development as a function of temperature through a temperature sweep and isothermal experiment. This is primarily to characterize polyphenylene sulfide. ( read more ).....Closed
08-0439 A2LA Mechanical Lab needed to do Abrex Resistance testing. ( read more ).....Closed
08-0435 Mechanical laboratory needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout the body which substantially reduces the chance of injury. Directive for Personal Protective Equipment. Safety harnesses for industrial use and climbing. ( read more ).....Closed
08-0426 Mechanical lab needed for testing a full body harness to Personal Protective Product Directive. Body Harness distributes fall forces throughout the body which substantially reduces the chance of injury. Directive for Personal Protective Equipment. Safety harnesses for industrial use and climbing. ( read more ).....Closed
08-0417 Mechanical laboratory needed for catalytic converter tast EBA testing ( read more ).....Closed
08-0389 NDT Mechanical lab needed for ASTM testing to aerospace specs including hardness testing; flourescent penetrant inspection, magnetic particle inspection; surface temper etch inspection; conductivity testing ( read more ).....Closed
08-0344 Mechanical lab needed for the ASTM creep-tensile testing of some geotextile samples using ASTM D6992. ( read more ).....Closed
08-0329 ISO lab needed for ISO Conformance Testing of Product with available Standards. The Products are: 1)Rubber Back-up Pads 2)Cup Brush 3)Coated Abrasive Disc 4)Back-up pads Velcro type 5)Lambs Wool Compounding Bonnet All above product need to be tested as per ISO standards. ( read more ).....Closed
08-0314 Analytical Chemsitry Lab needed 2-3 times per month for lithium analysis in rotor samples that are nontoxic, nonflammable and inert. Specifically, they are made mostly of amorphous silica gel in fiber glass with about 0.2 to 1.0% lithium by dry sample weight (the lithium is LiCl). Take an entire sample, cut it into fairly small pieces with a knife edge or knife (grinding is not necessary), place the entire sample in a weighed beaker, dry at 150C in a lab oven to constant weight (takes about 15 ( read more ).....Closed
08-0299 Metallurgical lab needed for lithium analysis in nontoxic, nonflammable and inert rotor samples. Specifically, they are made mostly of amorphous silica gel in fiber glass with about 0.2 to 1.0% lithium by dry sample weight (the lithium is LiCl). Take an entire sample, cut it into fairly small pieces with a knife edge or knife (grinding is not necessary), place the entire sample in a weighed beaker, dry at 150C in a lab oven to constant weight (takes about 15 to 30min), weigh hot or place in desi ( read more ).....Closed
08-0258 Acoustics and Vibration laboratory needed to perform sound and vibration testing on minature diaphragm pumps. We would be looking for a report that identifies specific trends in the signatures. ( read more ).....Closed
08-0239 Electrical Mechanical laboratory needed for energy testing as a verification process. We are a small company called Gravity Energy Development SA based in Liechtenstein. ( read more ).....Closed
08-0223 Materials laboratory needed for mechanical testing of 15 different conformal coating products (acrylic, urethane, and synthetic rubber) using DMA (ASTM-D5279) and TMA (ASTM-D6341) to obtain glass transition temperature, CTE, and elastic modulus (Young modulus) values for all samples. Please let me know if you can help with doing the analysis. Also let me know if we are eligible to receive any special discount due to high number of samples. ( read more ).....Closed
08-0212 Mechanical laboratory needed for Charge Air Thermal Cycle/Shock testing. The test piece will typically have 3" barb connections on the hot air side, while the cold water side will typically have 1" barb connections. The test sequence to be performed is as follows: 1.Cold water continuously flows through the cold side of the test heat exchanger, at a temperature of min 2C, max 15C at the inlet with a flow rate of max 30 l/min. 2.Once the external temperature of the test heat exchanger stabili ( read more ).....Closed
08-0204 Mechanical Laboratory needed to test Fire brake to reach NFPA 701 ( read more ).....Closed
08-0120 Mechanical laboratory needed for tests to be conducted on motor control assemblies as well as the individual components. ( read more ).....Closed
08-0090 Physical laboratory needed to do triaxial test for sintered ceramic materials Confining pressure 400MPa Loading axis until failure (around 2GPa) Iratxe Mijangos Department of Mechanical and Manufacturing Engineering Trinity College Dublin Ireland ( read more ).....Closed
07-2562 Mechanical Analytical Chemistry laboratory needed to test electronic device (Aircraft Warning Light Systems) FAA Certification in accordance with AC150/5345-43F; Photometric Test,High Temperature Test,Low Temperature,Test Rain Test,Wind Humidity Test, Salt Fog Test ( read more ).....Closed
07-2539 Mechanical laboratory needed that can test automotive ignition coils - only static circuit resistance and high voltage output. ( read more ).....Closed
07-2454 Physical laboratory needed for packaging test - mechanical handling, stacked vibration, low pressure, vehicle vibration, warehouse stacking ( read more ).....Closed
07-2428 Geological laboratory needed for testing geomechanical properties (UCS/Shear/Triaxial) for clay uranium ore which must simulate freezing of the material to best replicate insitu conditions ( read more ).....Closed
07-2408 Mechanical laboratory needed for ASTM Testing of Standard DMA. Need non contact TMA ie using a laser dilatometer. ( read more ).....Closed
07-2396 Mechanical laboratory needed for compression testing for foam impact sound deadener ( read more ).....Closed
07-2158 Mechanical laboratory needed to test electronic instrument to be certified for DO160 to be used in an Aircraft. ( read more ).....Closed
07-2142 Mechanical laboratory needed for ASTM tensile test - pull testing at 51 ft/sec ( read more ).....Closed
07-2137 Product safety laboratory needed for hazardous products testing, lead content in paint, flammability, mechanical hazards, etc. Requesting detail for specific tests required for marketing a mechanical plush toy in Canada. ( read more ).....Closed
07-2052 Experienced Cosmetics laboratory needed for testing on hair fibers including mechanical properties, optical properties, color, weathering, and any other testing available. ( read more ).....Closed
07-2014 Materials lab (bronze) needed for mechanical testing ( read more ).....Closed
07-1993 Mechanical Laboratory needed for ASTM push-button life cycle testing in accordance with ASTM F1578, one million cycles ( read more ).....Closed
07-1958 Metallurgical laboratory needed for Metallurgy failure analysis of an aluminum casting for a saw. ( read more ).....Closed
07-1909 Engineering Firm needs metallurgical laboratory for microhardness testing of case carburized parts ( read more ).....Closed
07-1860 Mechanical laboratory needed for Voltage and watertightness test 3. Installation test at low temerature 4.Climatic ageing test 5.Corrosion test 6.Electric ageing test 7. ( read more ).....Closed
07-1858 Mechanical laboratory needed for comparision testing of two different types of washing systems that we use to clean the coils of saw blades(manufacturted from carbon steel) prior to heat treating. We are mainly interested in cleaning oils from the milling process, but are also looking to remove any loose sediment from the coils. What I am looking to do is cut a variety of samples from variety of different coils(samples would be about 4-8" in length and the material width would range from about 1 ( read more ).....Closed
07-1850 Mechanical laboratory needed for testing variety of hollow shafts for torsion and angle of twist, different materials, with OD up to 6 inches and length up to 120 inches, torque about 2500 ft lbf. ( read more ).....Closed
07-1789 Mechanical laboratory needed for materials testing on a rubber bush: 1.- Statics spring constant test 2.- Adhesion Test 3.- Vibrational fatigue test 4.- Setting test ( read more ).....Closed
07-1689 Biomechanical Laboratory needed for ASTM Testing (ASTM Std F 1717-4) for Spinal Implant Constructs in a Vertebrectomy ( read more ).....Closed
07-1654 Electrical Laboratory needed for IEC or BS Electrical Short Circuit and Tensile Strength Testing: Cleat Type Impact Resistance Resistance to Electro Mechanical Force Temperature for Permanent Application Needle Flame Test Lateral Load Test Axial Movement Test SHORT CIRCUIT TEST ( read more ).....Closed
07-1632 Metallurgical laboratory needed for testing on metal shavings from a ship presently in dry dock for repairs in Spain which during routine inspections found a crack round the propeller shaft. In order to carryout the repairs to the shaft, we intend to forward the metal shavings from the shaft and have the material analysis carried out by your good company, so that correct repairs procedures can be finalized. We request you to kindly advise us the forwarding address, time for laboratory analys ( read more ).....Closed
07-1629 Mechanical laboratory needed for Quality Control Testing of various batches of produced biodiesel to confirm quality for use in commercial engines and generators ( read more ).....Closed
07-1616 Consumer Products Biomechanical laboratory needed for testing on body perfomance of core running apparel tops, shorts, and tights ( read more ).....Closed
07-1547 FAA Mechanical Laboratory required for installation and integration testing of aircraft air management systems for certification testing. ( read more ).....Closed
07-1523 Physical Laboratory needed for California Bearing Ratio (CBR) Testing ( read more ).....Closed
07-1363 Mechanical Laboratory needed for testing railway equipment to determine wear on equipment ( read more ).....Closed
07-1361 Mechanical laboratory needed to confirm that two resins are equivalent in Mechanical and Chemical Poperties. Information may be used for FDA submission. ( read more ).....Closed
07-1353 Mechanical laboratory needed for ASTM Testing for Mechanical properties of the SS sheet metal: Hardness, Tensile strength (ultimate & yield), Elongation at break, Modulus of elasticity (longitudinal & transverse). ( read more ).....Closed
07-1261 Analytical chemistry laboratory needed for chemical & mechanical testing on plastic injection moulding parts. ( read more ).....Closed
07-1209 Mechanical laboratory needed for ASTM Testing Notched Charpy Impact test at negative 20 degC (ASTM) 2. Gel Permeation Chromatography (140degC) ( read more ).....Closed
07-1163 Mechanical laboratory neeeded for testing according to standard PSA (Peugeot) Matrices: Braidings tubular, glass fibre + silicone (see Doc. in enclosure) 1. Tests with gritting according to standard D14 1428 Numbers references: 24 (see appendix) 2. Tests and requirements which the sheaths of maintenance and protection of the beams must satisfy. Normalizes PSA STE 96 458 709 99 §5.4.8.5: A number of references: 5 (see appendix) 3 Tests of behaviours to the fluids: according to PSA D47 ( read more ).....Closed
07-1152 Mechanical laboratory needed for Instron Tensile Testing - 800pcs Description: Measure Peak Tensile Force (lbf) Required to Unseat Plunger Tip (Hardened Steel) from Stainless Steel Shaft. Fixtures: will be provided. Set-up is minimal and cycle time is as fast as one can load and unload samples and run the test profile. Data required: force vs. distance curves and recorded peak force. Peak Tensile Test Settings: Load Cell = 10,000 lb Initial Speed = 0.1 in/min rate Test Speed = 0. ( read more ).....Closed
07-1079 Biomechanical laboratory needed for ISO testing on Threaded Female Luer Lock fitting to ensure compliance to ISO 594-1 & ISO 594-2: (1). Liquid Leakage (2). Air Leakage (3). Separation Force (4). Unscrewing Torque (5). Ease of Assembly (6). Resistance to Overriding (7). Stress Cracking ( read more ).....Closed
07-1025 Automotive engineering consulting company needs mechanical laboratory for ECE standard full vehicle crash testing in Japan, South Korea, and Europe. ( read more ).....Closed
07-0995 Materials laboratory needed for physical and mechanical testing of cement ( read more ).....Closed
07-0988 biomechanical Laboratory needed for EN13795 testing for Medical Draping products ( read more ).....Closed
07-0967 Mechanical Laboratory needed for JIS Testing (JIS D0207)Dust Testing on Starter motor and alternator ( read more ).....Closed
07-0951 Mechanical laboratory needed for testing measurements of force (.01 - 1.0 lb) required to insert various components through various valves ( read more ).....Closed
07-0936 Mechanical laboratory needed for Engine Emission Testing for VW new cars ( read more ).....Closed
07-0909 Physical laboratory needed for fully characterizing the physical and mechanical properties of a newly developed Active packaging technology: Tensile, Elongation, Modulus, COF, Imact, Puncture, Heat seal strength. Samples are a 2 mil EVA based film with our technology incorporated into it. CDA required for more detail ( read more ).....Closed
07-0890 Physical laboratory needed for tribology testing ( read more ).....Closed
07-0829 Mechanical laboratory needed for Carb Tier III evaporative emissions testing on motorcycle small engine application. Diurnal testing required for fuel tank, fuel tube, primer pump tube as required by section 2754(a) of the Evaporative Emissions Certification Requirements for small off-road engines by the California Environmental Protection Agency ( read more ).....Closed
07-0825 Mechanical laboratory needed for DMA / loss and storage modulus vs. frequency of a film of hyperelastic material ( read more ).....Closed
07-0600 Steel trading company needs metallurgical laboratory for testing of Mild Steel Square and Rectangular Pipes for Visual Inspection, Dimensional Tolerance, Chemical Composition and Mechanical Properties. Thanks. Alok Mehta ( read more ).....Closed
07-0542 Product Safety Laboratory needed for EN and ASTM Product Safety testing including for finished Wooden Toys and small Wooden Arts & Crafts item, approx. 12" length, approx. 10 unique items, for ages 4 and up. Analytical Chemistry, mechanical, physical testing includes: ASTM F963-03 Heavy Metals / ASTM F963-03 Mechanical Hazazards /ASTM F 963-03 Flammability EN71 Pt.1 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals ( read more ).....Closed
07-0516 US EPA Mechanical Laboratory needed for EPA Small Engine testing to confirm engine confirms to EPA requirements for small non road spark ignition engines. ( read more ).....Closed
07-0480 Mechanical laboratory needed for construction testing of 3-5 new models of mountain bicycles a year ? 2. How long would such bicycle testing take? 3. How much would such testing cost if we produced 3-5 new models a year? ( read more ).....Closed
07-0451 Mechanical laboratory needed for NEMA Ingress Protection (IP) testing for an enclosure of a drive which is to be conducted for our customer as per NEMA rating, The test facility specification, Hose down test Nozzle inside diameter = 25.4mm Water delivery = 246 liters/min Distance from the object= 3-3.7meter Time for nozzle moving along the test points = 6mm/sec Actual test time: (@test length 400mm) = 6 * 50s ( read more ).....Closed
07-0334 Mechanical laboratory needed for fatigue testing of engine fasteners ( read more ).....Closed
07-0270 Mechanical laboratory needed for ISO Testing of a a new patient lift device to EN 12182 and ISO 10535 prior to market introduction. We would also request that the test lab evaluate the setting and expected use/abuse of the product and design and execute tests to ensure long term durability of the product in the field over and above the prescribed standard tests. ( read more ).....Closed
07-0259 Asia Mechanical lab needed for CES Fatigue strength testing for fasteners as per CUMMINS Engineering standard CES 14250 and CES 14338 ( read more ).....Closed
07-0227 Physical laboratory needed for tensile testing new lifting lug designs that carry the weight of our products. They have their specific shape, not standart specimen shape. Test will simulate 60-degree lifting angle. ( read more ).....Closed
07-0159 ISO Medical Device Laboratory needed for mechanical properties testing ISO 11979-3, Biocompatibility testing ISO 11979-5 for intraocular lens (similar to lenses that are used in cataract surgery). ( read more ).....Closed
07-0062 ISO Mechanical laboratory laboratory needed for ISO (ISO/PAS 17712) seal strength testing: four (4) seal strength value tests required to obtain compliance to ISO/PAS 17712. They are:.  Tensile strength (pull apart force).  Shear strength (cutting force).  Bending strength (back and forth movement). Impact resistance (direct force on the products). ( read more ).....Closed
06-1815 Accredited laboratory needed to perform independent testing on a series of laboratory instruments including pH meters and microbalances according to a specific set of testing criteria we will supply. ( read more ).....Closed
06-1805 ISO Medical Device laboratory needed for ISO biomechanical testing (ISO 14243) knee prothesis fatigue ( read more ).....Closed
06-1689 Mechanical laboratory needed for non-destructive testing of switch used on a circuit board for a keyboard used in a cockpit. A crack has apeared in a .36 " X .36 " dome switch Since the end product is used in cockpit; I am interested in analyzing how the failure could have happened ? ( read more ).....Closed
06-1687 Mechanical laboratory needed for final Quality Inspection Testing of brake systems from Indonesia (hand levers and brakes for bikes). ( read more ).....Closed
06-1636 MECHANICAL LABORATORY NEEDED FOR SHEAR TESTING TO FAILURE THE HOLDING STRENGTH OF A VACUUM BRAZED JOINT. VERSUS INDUCTION BRAZED ( read more ).....Closed
06-1620 Physical laboratory needed for mechanical testing (load and yield) of a silo erection jack (25,000 pound capacity) ( read more ).....Closed
06-1615 Environmental and mechanical laboratory needed for Vacuum chamber testing, vibration, temperature cycling, tensile testing, temperature/humidity chamber testing ( read more ).....Closed
06-1596 Mechanical laboratory needed for performance testing of an ATV engine including the fuel curve, torque, horsepower, air/fuel ratio and RPM. ( read more ).....Closed
06-1595 Mechanical laboratory needed for ASTM Testing Properties of FRP Plate t. 6mm should be test for Mechanical Porperties and Strength for : 1. Tensile Strength, Tensile Modulus ASTM-D 638 2. Compressive Strength, Comp. Modulus ASTM-D 695 3. Flexural Strength, Flexural Modulus: ASTM-D 790 4. Shear Strength, Shear Modulus: ASTM.? 5. Specific Gravity / Density: ASTM-D 792 6. Poisson Ratio: ASTM .? ( read more ).....Closed
06-1589 Electrical laboratory needed for IEC Testing (IEC 61238-1) current cycling testing compression and mechanical connector for power cables for rated viltages up to 30 kv (Um=36kv) ( read more ).....Closed
06-1538 Mechanical laboratory needed for physical testing a plastic handle measuring 13cm by 3 cm into an autoclave for 10 minutes at 120 degrees C ( read more ).....Closed
06-1527 ASTM Mechanical laboratory for testing NAPLs for physical properties, specifically viscosity, density, and surface tension. ( read more ).....Closed
06-1522 Mechanical laboratory needed for testing load and fatigue of a mechanical linkage system on automobile. ( read more ).....Closed
06-1517 Mechanical laobratory needed for core analysis equipments. ( read more ).....Closed
06-1462 Mechanical laboratory needed for ASTM d5084-03, modified for No. 6 fuel oil at 110 degrees for 15 days. ( read more ).....Closed
06-1451 Mechanical laboratory needed for spectrum analysis to determine the fundamental vibration frequencies for wrought steel cabinets. ( read more ).....Closed
06-1441 Physical laboratory needed for ASTM testing (ASTM E23ASTM B31.3) Charpy Impact. Design Temp -320F for cryogenic services. Material: 304L ss 2" SCH40 pipe. Testing required for weld materials and heat affected zone. ( read more ).....Closed
06-1428 Physical laboratory needed for analytical chemistry and mechanical testing of vinyl solution placed on testiles. Materials need to be waterproof and solution needs to be durable and react with the body heat. ( read more ).....Closed
06-1351 Electrical laboratory needed for BS EN 61238-1:2003 testing of power cables connectors and lugs, mechanical and electrical tests ( read more ).....Closed
06-1300 EPA and CARB mechanical laboratory needed for physical testing of E50cc and 150cc onroad motorcycle ( read more ).....Closed
06-1230 Physical laboratory needed for mechanical testing of polymer films in dried film or liquid state. ( read more ).....Closed
06-1220 Mechanical laboratory needed for ASTM Testing for Heat Aging to Degradation on food grade nylon films packaging - ~1.0 mil thick. I need a comparison of 2 films of time vs. temperature (to failure). I may need tensile and or puncture testing. ( read more ).....Closed
06-1205 Analytical laboratory needed for Capillary Electrophoresis computerized testing of oil samplings, to test coolant components. The lab must also be able to perform mechanical repairs to our equipment, as needed. The equipment models are listed below. Capillary Electrophoresis Equipment Agilent CE Model G1600A S/N DE0162991 Agilent CE Model G1602A S/N DE0162098 Agilent CE Model G1602A S/N DE80101754 Agilent CE Model G1600A S/N DE00601928 Thank you! ( read more ).....Closed
06-1202 Analytical Laboratory needed to perform Capillary Electrophoresis computerized testing of oil samplings, to test coolant components. The lab must also be able to perform mechanical repairs to our equipment, as needed. The equipment models are listed below. Capillary Electrophoresis Equipment Agilent CE Model G1600A S/N DE0162991 Agilent CE Model G1602A S/N DE0162098 Agilent CE Model G1602A S/N DE80101754 Agilent CE Model G1600A S/N DE00601928 ( read more ).....Closed
06-1182 Product Safety laboratory needed for FHSA 16 CFR 1312 testing of imported bicyles from China. Testing is required to verify that meet all requirements of 16 CFR 1512 so they can be sold in the USA. ( read more ).....Closed
06-1090 ISO Mechanical laboratory needed for ASTM testing for fracture assessment of a broken part (wheel hub), cast aluminium to determine the fracture origin, point and cause. ( read more ).....Closed
06-1058 A2LA mechanical laboratory needed for ASTM, IFI, and CNLA Dimensional and physical testing of fasteners(Nuts, bolts, screws) ( read more ).....Closed
06-0825 Manufacturer needs mechanical laboratory for Random Vibration Testing. More specifically, 20 minutes of random vibration in the vertical axis for each unit of our units. ( read more ).....Closed
06-0797 IEC electrical laboratory for testing the MCB,MCCB for our load centers and test the load centers complete according to IEC60898 and IEC60947-1 ,3 ...type tested assembles ,rated voltage is not exceed 1000v AC, frequency not exceed 1000Hz , or 1500v DC . The test we need to do according to 60947 as following : 1-verification of temperature rise limits . 2-verification of dielectric properties 3-verification of short-circuit withstand strength 4-verification of continuity of the ( read more ).....Closed
06-0781 Mechanical laboratory needed for CSA ( CSA Z245.11-05)testing for tensile, hardness, guided bend, charpy impact ( read more ).....Closed
06-0446 Europe physical laboratory needed for testing differenses between gas and air flow meter calibration ( read more ).....Closed
06-0437 Large company looking for mechanical and analytical laboratory for sizeable account. Testing includes Atomic Force Microscopy (AFM), Auger Spectroscopy, Boroscopy, Capillary Electrophorses (CE), Chemical Imaging Microscope (Fluorescence), Composite Layup Sequencing, Contact Angle Goniometry, Dektak Profilometer, Dynamic Light Scattering, Dynamic Tear test, Energy Dispersive X ray Spectroscopy (EDS, Fiber Matrix Void Volume Fractions, Fractographic Examination (optical) and Scanning Electron Micr ( read more ).....Closed
06-0400 Northeast USA Laboratory needed for testing polymer nanocomposite samples for coefficient of thermal expansion studies using Thermomechanical analyzer (TMA). ( read more ).....Closed
06-0201 GLP medical devices laboratory needed for mechanical, ASTM / ISO Fatigue testing on an implantable medical devices ( read more ).....Closed
06-0159 Mechanical laboratory needed for Dynamic mechanical thermal analysis (DMTA) testing or Dynamic mechanical analysis (DMA)testing ( read more ).....Closed
06-0139 Mechanical laboratory needed for tensile testing of plastics at high temperature(between 100 and 150 Degrees Celsius) with the use of an extensometer ( read more ).....Closed
06-0085 -ASTM F1148 PERFORMANCE TESTING FOR TOYS: -LABELING AND INSTRUCTIONAL REVIEW -BEARING ATTACHMENT -Hazardous Products (Toys) -Mechanical Hazards Testing (Includes: Drop Test; 10 -Push-Pull Test; Sharp Edges/Points, Small Parts; Noise Level, etc. -Flammability of Fabrics -Cellulose Nitrate -Heavy Metals Analysis of Applied Surface Coatings ( read more ).....Closed
05-0922 IC Engine Durability Testing. Mechanical durability testing of pre-production diesel engies. Various durations up to 800hr ( read more ).....Closed
05-0875 cleanliness testing of aluminum foil: gravimetic test, oil extraction test, n-hexane extractable material. check mechanical properties of aluminum ( read more ).....Closed
05-0855 EN & ASTM Product Safety testing for Puppet Toys with vinyl painted head, fabric and fur body for ages 5 and up. Analytical Chemistry, mechanical, physical testing includes: 16 CFR 1303 Lead content, ASTM F963-03 Heavy Metals 16 CFR 1500 / ASTM F963-03 Mechanical Hazazards 16 CFR 1500.44/ASTM F 963-03 Flammability EN71 Pt.1 1998 Mechanical Hazards (1-7)EN71 Pt.2 Flammability EN71 Pt.3 Heavy metals ( read more ).....Closed
05-0787 Air purifier manufacturer looking for a lab that can do physical, electrial, mechanical performance testing on ozone based air purifiers ( read more ).....Closed
05-0780 Determination of unknown residue developing on the exterior surface of in-service building material by physical, analytical chemistry, mechanical or physical testing. ( read more ).....Closed
05-0775 Polymer Testing --- Searching for a GMP/GLP compliant laboratory to perform CoA verification physical, mechanical, materials, or analytical chemsitry testing for a pharmaceuticals polymer. Tests include NMR, GPD (with RI detection), and OVI. ( read more ).....Closed
05-0750 Biomechanical and biomedical preclinical performance comparision of cryotherapy of the distal esophagus in the swine. ( read more ).....Closed
05-0705 Sound Abosorption Test, % min, Initial Source Approval Only as per ASTM C384. Sound Abosorption Test, % min, Initial Source Approval Only as per ASTM C384. ( read more ).....Closed
05-0656 in vivo orthopedic medical device. Orthopedic animal models. Fracture and metaphyseal defect models in rabbits, sheep and/or primates. Biomechanical biomedical, cytology and histology also. ( read more ).....Closed
05-0533 Airbus test0031 smoke density and toxicity for components installed inside the pressurized section of the fuselage ( read more ).....Closed
05-0199 Density, compressive strength, Thermal conductivity, and closed cell content of rigid polyurethane foam insulation ( read more ).....Closed
05-0192 capability for testing per the following standards: ASTM D 882 ASTM D 1004 ASTM D 1894 ASTM D 3420 ASTM F1249 ASTM E 1252 ( read more ).....Closed
05-0130 Strength and Fatigue testing of a sintered metal coupling that attaches a pump to a motor. Must test stregth in torsion and fatigue testing of extremely rapid cycling until failure (~15 days) ( read more ).....Closed
05-0018 thermogravimetirc analysis (TGA), thermomechanical analysis (TMA), dilatometry (DIL)submicron metal powders; room temperature to 1200 C ( read more ).....Closed
04-0345 Glove Manafcaturer needs physical and mechanical testing of Knit gloves according to test method: EN388 (but only cut + abrasion ( read more ).....Closed
04-0144 To coordinate gamma irradiation and provide testing for compression set, break loose force and seal integrity of a rubber plunger in a small glass barrel. ( read more ).....Closed
04-0118 bone cement and bone filler to FDA requirements ( read more ).....Closed
For more information on Mechanical Testing,Mechanical Tests, Mechanical Research and Development, Mechanical Analysis, Mechanical Studies, Mechanical Screening, Mechanical Examinations,Mechanical Experiments,#testing_type#Analyse, Mechanical Field Studies, Mechanical Sampling, Mechanical Certification or Mechanical Laboratories , please call Toll-Free 1-877-353-0451 or 1-403-770-1992 or email us
 
>
>

Need to find a Contract Laboratory for other Laboratory Testing, Research and Developments, Studies, Examinations, Field Studies, Sampling, Experimentation, Certification, Surveys, Engineering, Assays, Screening, or Analysis, please contact Contract Laboratory , Inc. at 403-770-1992, e-mail us or simply Submit a Laboratory Test Request

Acoustics Testing Requests | Agricultural Testing Requests | Aerospace Testing Requests | Analytical Chemistry Testing Requests | |Apparel Testing Requests | Automotive Testing Requests | Bioanalytical Testing Requests Certification Testing Requests |Climatics Testing Requests | |Clinical Testing Requests | Consumer Products Testing Requests | Construction Testing Requests Cytology Testing Requests | Defense Testing Requests | Diagnostic Testing Requests | Food Testing Requests | Electrical Testing Requests |Energy Testing Requests Environmental Testing Requests Forensics Testing Requests | Geotechnical Testing Requestsl HydrologyTesting Requests | |Histology Testing Requests Immunology Testing Requests Industrial Hygiene Testing Requests | Materials Testing Requests | Marine Testing Requests | Mechanical Testing Requests | Medical Testing Requests | Metallurgical Testing Requests | Medical Devices Testing Requests |Metrology Testing Requests | Microbiology Testing Requests | Molecular Biology Testing Requests |Nanotechnology Testing Requests |Non-Destructive Testing Requests | Oil and Petroleum Testing Requests | Optical Testing Requests | |Packaging Testing Requests | Pharmaceuticals Testing Requests | Physical Testing Requests | Plastics and Polymers Testing Requests | Polymer Testing Requests |Power and Energy Testing Requests |Reliability Testing Requests | Preclinical Testing Requests |Rheology Testing Requests | Product Safety Testing Requests |Serology Testing Requests | Thermal Testing Requests | Tribology Testing Requests | Telecommunications Testing Requests Textiles Testing Requests Transportation Testing Requests |Toys Testing Requests | Toxicology Testing Requests ||Virology Testing Requests |Weathering Testing Requests | Other Laboratory Testing Requests
About Us
Contact Us
Partners
Advertise with Us
Statistics & Demographics
Investors
Employment
Site Map
Contract Laboratory .com values your privacy. For more information on our Privacy Policy, please visit Privacy Policy
DISCLAIMER: This information is provided as a service only. Company and product information is prepared by individual companies and has not been independently verified. As such Contract Laboratory Inc can not be responsible for any loss or damage arising from the purchase, sale or use of any service or product through this site.

This site is owned and managed by Contract Laboratory, Inc.